Re: [PATCH 05/10] added media specific (MS) TCP drivers

From: Tobias Klauser
Date: Tue Nov 04 2014 - 03:48:57 EST


On 2014-11-03 at 21:42:52 +0100, Stephanie Wallick <stephanie.s.wallick@xxxxxxxxx> wrote:
> This is where we handle media specific packets and transport. The MS driver
> interfaces with a media agnostic (MA) driver via a series of transfer pairs.
> Transfer pairs consist of a set of functions to pass MA USB packets back
> and forth between MA and MS drivers. There is one transfer pair per device
> endpoint and one transfer pair for control/management traffic. When the MA
> driver needs to send an MA USB packet, it hands the packet off to the MS
> layer where the packet is converted into an MS form and sent via TCP over
> the underlying ethernet or wireless medium. When the MS driver receives a
> packet, it converts it into an MA USB packet and hands it off the the MA
> driver for handling.
>
> In addition, the MS driver provides an interface to inititate connection events.
> Because there are no physical MA USB ports in an MA USB host, the host must be
> notified via software when a device is connected.
>
> Lastly, the MS driver contains a number of ioctl functions that are used by a
> utility to adjust medium-related driver parameters and connect or disconnect the
> MA USB host and device drivers.
>
> Signed-off-by: Sean O. Stalley <sean.stalley@xxxxxxxxx>
> Signed-off-by: Stephanie Wallick <stephanie.s.wallick@xxxxxxxxx>
> ---
> drivers/staging/mausb/drivers/mausb_ioctl.c | 373 +++++++++++++++++++
> drivers/staging/mausb/drivers/mausb_ioctl.h | 99 +++++
> drivers/staging/mausb/drivers/mausb_msapi.c | 110 ++++++
> drivers/staging/mausb/drivers/mausb_msapi.h | 232 ++++++++++++
> drivers/staging/mausb/drivers/mausb_tcp-device.c | 147 ++++++++
> drivers/staging/mausb/drivers/mausb_tcp-host.c | 144 ++++++++
> drivers/staging/mausb/drivers/mausb_tcp.c | 446 +++++++++++++++++++++++
> drivers/staging/mausb/drivers/mausb_tcp.h | 129 +++++++
> 8 files changed, 1680 insertions(+)
> create mode 100644 drivers/staging/mausb/drivers/mausb_ioctl.c
> create mode 100644 drivers/staging/mausb/drivers/mausb_ioctl.h
> create mode 100644 drivers/staging/mausb/drivers/mausb_msapi.c
> create mode 100644 drivers/staging/mausb/drivers/mausb_msapi.h
> create mode 100644 drivers/staging/mausb/drivers/mausb_tcp-device.c
> create mode 100644 drivers/staging/mausb/drivers/mausb_tcp-host.c
> create mode 100644 drivers/staging/mausb/drivers/mausb_tcp.c
> create mode 100644 drivers/staging/mausb/drivers/mausb_tcp.h
>
> diff --git a/drivers/staging/mausb/drivers/mausb_ioctl.c b/drivers/staging/mausb/drivers/mausb_ioctl.c
> new file mode 100644
> index 0000000..0c6c6bd
> --- /dev/null
> +++ b/drivers/staging/mausb/drivers/mausb_ioctl.c

[...]

> +/**
> + * This function is used to send a message to the user, in other words, the
> + * calling process. It basically copies the message one byte at a time.
> + *
> + * @msg: The message to be sent to the user.
> + * @buffer: The buffer in which to put the message. This buffer was given to
> + * us to fill.
> + */
> +void to_user(char *msg, long unsigned int buffer)
> +{
> + int length = (int)strlen(msg);
> + int bytes = 0;
> +
> + while (length && *msg) {
> + put_user(*(msg++), (char *)buffer++);
> + length--;
> + bytes++;
> + }

Any reason not to use copy_to_user here? That way, access_ok would only
need to be executed once for the whole range.

In any case, the return value of put_user/copy_to_user will need to be
checked.

> +
> + put_user('\0', (char *)buffer + bytes);
> +}

[...]

> +/**
> + * This function is used to read from the device file. From the perspective of
> + * the device, the user is reading information from us. This is one of the
> + * entry points to this module.
> + *
> + * @file: The device file. We don't use it directly, but it's passed in.
> + * @buffer: The buffer to put the message into.
> + * @length: The max length to be read.
> + * @offset: File offset, which we don't use but it is passed in nontheless.
> + */
> +static ssize_t mausb_read(struct file *file, char __user *buffer,
> + size_t length, loff_t *offset)
> +{
> + int bytes_read = 0;
> +
> + if (*message_point == 0)
> + return 0;
> + while (length && *message_point) {
> + put_user(*(message_point++), buffer++);
> + length--;
> + bytes_read++;
> + }

See comment for to_user above. Why not use copy_to_user?

> +
> + return bytes_read;
> +}
> +
> +/**
> + * This function is used to write to the device file. From the perspective of
> + * the device, the user is writing information to us. This is one of the
> + * entry points to this module.
> + *
> + * @file: The device file. We don't use it directly, but it's passed in.
> + * @buffer: The buffer that holds the message.
> + * @length: The length of the message to be written.
> + * @offset: File offset, which we don't use but it is passed in nontheless.
> + */
> +static ssize_t mausb_write(struct file *file, const char __user *buffer,
> + size_t length, loff_t *offset)
> +{
> + int i;
> +
> + for (i = 0; i < length && i < BUFFER; i++)
> + get_user(message[i], buffer + i);

copy_from_user? In any case, check the return value here as well.

> + message_point = message;
> +
> + return i;
> +}
> +
> +/**
> + * This function is used to execute ioctl commands, determined by ioctl_func.
> + *
> + * @file: The device file. We don't use it directly, but it's passed in.
> + * @ioctl_func: This value determines which ioctl function will be used.
> + * @ioctl_buffer: This buffer is used to transfer data to/from the device.
> + */
> +long mausb_ioctl(struct file *file, unsigned int ioctl_func,
> + unsigned long ioctl_buffer)
> +{

This entire function needs return value checks for put_user/get_user.

> + int bytes = 0;
> + char *msg, *ip_addr;
> + char chr;
> + int ret, value;
> + unsigned long int long_ret;
> +
> + switch (ioctl_func) {
> + case IOCTL_SET_MSG:
> + msg = (char *)ioctl_buffer;
> + get_user(chr, msg);
> + for (bytes = 0; chr && bytes < BUFFER; bytes++, msg++)
> + get_user(chr, msg);
> + mausb_write(file, (char *)ioctl_buffer, bytes, 0);
> + break;
> + case IOCTL_GET_MSG:
> + bytes = mausb_read(file, (char *)ioctl_buffer, 99, 0);
> + put_user('\0', (char *)ioctl_buffer + bytes);
> + break;
> + case IOCTL_GET_VRSN:
> + to_user(DRIVER_VERSION, ioctl_buffer);
> + break;
> + case IOCTL_GET_NAME:
> + to_user(MAUSB_NAME, ioctl_buffer);
> + break;
> + case IOCTL_GADGET_C:
> + ret = gadget_connection(1);
> + if (ret >= 0)
> + to_user("g_zero connect process complete", ioctl_buffer);
> + else
> + to_user("g_zero connect process failed", ioctl_buffer);
> + break;
> + case IOCTL_GADGET_D:
> + ret = gadget_connection(0);
> + if (ret >= 0)
> + to_user("g_zero disconnect process complete",
> + ioctl_buffer);
> + else
> + to_user("g_zero disconnect process failed",
> + ioctl_buffer);
> + break;
> + case IOCTL_MED_DELAY:
> + msg = (char *)ioctl_buffer;
> + get_user(chr, msg);
> + for (bytes = 0; chr && bytes < BUFFER; bytes++, msg++)
> + get_user(chr, msg);
> + mausb_write(file, (char *)ioctl_buffer, bytes, 0);
> + if (kstrtoint((const char *)message_point, 0, &value) != 0) {
> + /* TODO: handle error */
> + }
> + ret = set_medium_delay(value);
> + sprintf(message_point, "DELAY VALUE: ms: %d, jiffies: %d\n",
> + value, ret);
> + to_user(message_point, ioctl_buffer);
> + break;
> + case IOCTL_SET_IP:
> + msg = (char *)ioctl_buffer;
> + get_user(chr, msg);
> + for (bytes = 0; chr && bytes < BUFFER; bytes++, msg++)
> + get_user(chr, msg);
> + mausb_write(file, (char *)ioctl_buffer, bytes, 0);
> + ip_addr = kmalloc(strlen(message_point)+1, GFP_KERNEL);
> + if (!ip_addr) {
> + printk(KERN_ALERT "Memory allocation failed!\n");

No need to print an error message for memory allocation failures,
kmalloc will take care of printing a more extensive message.

> + break;
> + }
> + strcpy(ip_addr, message_point);
> + sprintf(message_point, "Connecting to ...\nIP Address: %s\n",
> + ip_addr);
> + to_user(message_point, ioctl_buffer);
> + kfree(ip_addr);
> + break;
> + case IOCTL_SET_PORT:
> + msg = (char *)ioctl_buffer;
> + get_user(chr, msg);
> + for (bytes = 0; chr && bytes < BUFFER; bytes++, msg++)
> + get_user(chr, msg);
> + mausb_write(file, (char *)ioctl_buffer, bytes, 0);
> + if (kstrtoint((const char *)message_point, 0, &value) != 0) {
> + /* TODO: handle error */
> + }
> + ret = set_port_no(value);
> + sprintf(message_point, "PORT NUMBER:%d, Returned %i\n", value,
> + ret);
> + to_user(message_point, ioctl_buffer);
> + break;
> + case IOCTL_SET_IP_DECIMAL:
> + msg = (char *)ioctl_buffer;
> + get_user(chr, msg);
> + for (bytes = 0; chr && bytes < BUFFER; bytes++, msg++)
> + get_user(chr, msg);
> + mausb_write(file, (char *)ioctl_buffer, bytes, 0);
> + if (kstrtoul((const char *)message_point, 0, &long_ret) != 0) {
> + /* TODO: handle error */
> + }
> +
> + ret = set_ip_addr(long_ret);
> + sprintf(message_point, "\nDecimal Value:%lx returned %i\n",
> + long_ret, ret);
> + to_user(message_point, ioctl_buffer);
> + break;
> + case IOCTL_SET_MAC:
> + {
> + u8 *mac = kmalloc(6, GFP_KERNEL);
> + u8 *buf = (u8 __user *)ioctl_buffer;
> + int i, ret;
> + if (!mac) {
> + pr_err("Memory allocation failed!\n");

See comment above. Since this is only a 6 byte buffer, it's probably
easier to just allocate it on the stack.

> + break;
> + }
> + ret = copy_from_user(mac, buf, 6);
> + if (ret) {
> + pr_err("copy_from_user failed\n");
> + kfree(mac);
> + break;
> + }
> + for (i = 0; i < ETH_ALEN; i++)
> + pr_info("mac[%d]=0x%x\n", i, mac[i]);
> + ret = set_mac_addr(mac);
> + if (ret)
> + pr_err("unable to set MAC addr\n");
> + kfree(mac);
> + break;
> + }
> + }
> +
> + return 0;

You probably want to return an error here in case anything went wrong
above or if the ioctl number is invalid.

> +}

[...]

> diff --git a/drivers/staging/mausb/drivers/mausb_msapi.c b/drivers/staging/mausb/drivers/mausb_msapi.c
> new file mode 100644
> index 0000000..9dd8fa5
> --- /dev/null
> +++ b/drivers/staging/mausb/drivers/mausb_msapi.c

[...]

> +/**
> + * Frees the given ms_pkt and associated buffers. This function is not
> + * necessary to use the API, but could be useful on both sides of the interface.
> + */
> +void mausb_free_ms_pkt(struct ms_pkt *pkt)
> +{
> + int i;
> + void *current_buf;
> +
> + for (i = 0; i < pkt->nents; ++i) {
> + current_buf = pkt[i].kvec->iov_base;
> + if (NULL != current_buf) {
> + kfree(current_buf);
> + } else {
> + printk(KERN_DEBUG "%s: cannot find buffer for "
> + "kvec #%i in ms_pkt at %p\n",
> + __func__, i, pkt->kvec);

pr_debug()

> + }
> + }
> +
> + kfree(pkt);
> +
> + return;
> +}
> +EXPORT_SYMBOL(mausb_free_ms_pkt);
> +
> +/**
> + * Calculates the total length of the data in a ms_pkt. Returns the total
> + * length of the data in the ms_pkt, or a negative errno.
> + */
> +int mausb_ms_pkt_length(struct ms_pkt *pkt)
> +{
> + int i;
> + int total_length = 0;
> +
> + for (i = 0; i < pkt->nents; ++i)
> + total_length += pkt[i].kvec->iov_len;
> +
> + printk(KERN_DEBUG "%s: total *kvec length: %i\n", __func__,
> + total_length);

pr_debug()

> +
> + return total_length;
> +}

[...]

> diff --git a/drivers/staging/mausb/drivers/mausb_tcp-device.c b/drivers/staging/mausb/drivers/mausb_tcp-device.c
> new file mode 100644
> index 0000000..28978a0
> --- /dev/null
> +++ b/drivers/staging/mausb/drivers/mausb_tcp-device.c

[...]

> +static int mausb_tcp_device_connect(int on)
> +{
> + int ret;
> +
> + if (on && dev_tcp_medium->socket == NULL) {
> + ret = sock_create(PF_INET, SOCK_STREAM, IPPROTO_TCP,
> + &dev_tcp_medium->socket);
> +
> + if (0 > ret) /* TODO: real errorchecking */
> + return ret;
> +
> + do {
> + ret = kernel_connect(dev_tcp_medium->socket,
> + &dev_tcp_medium->addr,
> + sizeof(dev_tcp_medium->addr_in), O_RDWR);
> + printk(KERN_DEBUG "%s:kernel_connect returned %i\n",
> + __func__, ret);

pr_debug(), here any in several other places across the file...

> +
> + if (0 > ret) {
> + /* poll until we can connect sucessfully */
> + msleep(MAUSB_TCP_DEV_CONNECT_POLL_MS);
> + }
> +
> +
> + } while (0 > ret);
> +
> + /*spawn off a listening thread */
> + dev_tcp_medium->recv_task = kthread_run(mausb_tcp_device_thread,
> + NULL, "mausb_tcp_device_thread");

kthread_run might return an ERR_PTR which needs to be handled here.

> + }
> +
> + ret = dev_tcp_medium->ma_driver->device_connect(on);
> +
> + return ret;
> +}

[...]

> diff --git a/drivers/staging/mausb/drivers/mausb_tcp-host.c b/drivers/staging/mausb/drivers/mausb_tcp-host.c
> new file mode 100644
> index 0000000..0302031
> --- /dev/null
> +++ b/drivers/staging/mausb/drivers/mausb_tcp-host.c

[...]

> +static int mausb_tcp_host_connect(int on)
> +{
> + int ret;
> +
> + if (on) {
> + ret = kernel_bind(host_tcp_medium->setup_socket,
> + &host_tcp_medium->addr,
> + sizeof(host_tcp_medium->addr_in));

Missing error handling.

> +
> + ret = kernel_listen(host_tcp_medium->setup_socket,
> + MAUSB_TCP_MAX_NUM_CHANNELS);

Missing error handling.

> + printk(KERN_DEBUG "%s: kernel_listen returned %i\n",
> + __func__, ret);
> +
> + ret = kernel_accept(host_tcp_medium->setup_socket,
> + &host_tcp_medium->socket, 0);
> + printk(KERN_DEBUG "%s:kernel_accept returned %i\n",
> + __func__, ret);
> +
> + if (0 > ret)
> + return ret;

kernel_accept might return negative values in case of an error, which
needs to be handled properly here.

> +
> + if (NULL == host_tcp_medium->recv_task) {
> + host_tcp_medium->recv_task = kthread_run(
> + mausb_tcp_host_thread, NULL,
> + "mausb_tcp_host_thread");
> + }
> + }
> +
> + ret = host_tcp_medium->ma_driver->device_connect(on);
> +
> + return ret;
> +}

[...]

> diff --git a/drivers/staging/mausb/drivers/mausb_tcp.c b/drivers/staging/mausb/drivers/mausb_tcp.c
> new file mode 100644
> index 0000000..291139e
> --- /dev/null
> +++ b/drivers/staging/mausb/drivers/mausb_tcp.c

[...]

> +int mausb_tcp_receive_loop(struct mausb_tcp_medium *tcp_medium)
> +{
> + struct msghdr msg;
> + struct ms_pkt *pkt;
> + int data_rcvd = 0;
> +
> + mausb_tcp_init_msg(&msg);
> +
> + while (!kthread_should_stop()) {
> +
> + pkt = kzalloc(sizeof(struct ms_pkt), GFP_KERNEL);

Missing return value check.

> +
> + printk(KERN_DEBUG "%s: preparing to receive data\n",
> + __func__);
> +
> + data_rcvd = mausb_tcp_receive_packet(tcp_medium, &msg, pkt);
> +
> + if (0 >= data_rcvd) {
> + printk(KERN_DEBUG "%s: received no data (err %i)\n",
> + __func__, data_rcvd);
> +
> + sock_release(tcp_medium->socket);
> + return data_rcvd;
> +
> + } else {
> + printk(KERN_DEBUG "%s: received %i bytes\n",
> + __func__, data_rcvd);
> + }
> +
> + if (data_rcvd > 0) {
> + mausb_transfer_packet(pkt,
> + &tcp_medium->ma_driver->pkt_dmux);
> + }
> +
> + data_rcvd = 0;
> + }
> +
> + sock_release(tcp_medium->socket);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(mausb_tcp_receive_loop);

[...]

> +/**
> + * initialization function
> + */
> +struct mausb_tcp_medium *alloc_init_mausb_tcp_medium(
> + enum mausb_tcp_module_type type)
> +{
> + struct mausb_tcp_medium *medium;
> + int ret;
> +
> + printk(KERN_DEBUG "%s\n", __func__);
> +
> + medium = kzalloc(sizeof(struct mausb_tcp_medium), GFP_KERNEL);
> + if (NULL == medium) {
> + printk(KERN_DEBUG "%s: memory allocation failed\n", __func__);

No error message needed, kmalloc will take care of it.

> + return NULL;
> + }
> +
> + ret = sock_create(PF_INET, SOCK_STREAM, IPPROTO_TCP,
> + &medium->setup_socket);

Error handling is missing.

> +
> + medium->addr_in.sin_family = AF_INET;
> + medium->addr_in.sin_port = htons(MAUSB_TCP_PORT_HOST);
> +
> + spin_lock_init(&medium->lock);
> +
> + tcp_medium[type] = medium;
> +
> + return medium;
> +}
> +EXPORT_SYMBOL(alloc_init_mausb_tcp_medium);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/