[RESEND PATCH V2] mtd: block2mtd: Present block2mtd timely on boot time

From: Rodrigo Freire
Date: Sat Nov 01 2014 - 09:34:19 EST


From: Felix Fietkau <nbd@xxxxxxxxxxx>

mtd: block2mtd: Ensure that block2mtd is presented timely on boot time

Currently, a block MTD device is not presented to the system on time, in
order to start mounting the filesystems. This patch ensures that block2mtd
is presented at the right time, so filesystems can be mounted on boot time.
This issue is seen on BCM2835 (Raspberry Pi) systems when mounting JFFS2
over block2mtd devices as the root filesystem.
This patchset also adds a MTD device name and a timeout option to the driver.
Original patchset:
https://dev.openwrt.org/browser/trunk/target/linux/generic/patches-3.12/440-block2mtd_init.patch?rev=40444
https://dev.openwrt.org/browser/trunk/target/linux/generic/patches-3.12/441-block2mtd_probe.patch?rev=40444

Signed-off-by: Felix Fietkau <nbd@xxxxxxxxxxx>
Signed-off-by: Herton Ronaldo Krzesinski <herton@xxxxxxxxxx>
Signed-off-by: Rodrigo Freire <rfreire@xxxxxxxxxx>
---
V2: Uses kstrdup, removed PAGE_MASK.
--- a/drivers/mtd/devices/block2mtd.c 2014-09-16 21:38:12.543952627 -0300
+++ b/drivers/mtd/devices/block2mtd.c 2014-09-17 17:43:21.424944394 -0300
@@ -9,7 +9,15 @@

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

+/*
+* When the first attempt at device initialization fails, we may need to
+* wait a little bit and retry. This timeout, by default 3 seconds, gives
+* device time to start up. Required on BCM2835.
+*/
+#define MTD_DEFAULT_TIMEOUT 3
+
#include <linux/module.h>
+#include <linux/delay.h>
#include <linux/fs.h>
#include <linux/blkdev.h>
#include <linux/bio.h>
@@ -17,6 +25,7 @@
#include <linux/list.h>
#include <linux/init.h>
#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
#include <linux/mutex.h>
#include <linux/mount.h>
#include <linux/slab.h>
@@ -209,12 +218,14 @@ static void block2mtd_free_device(struct
}


-static struct block2mtd_dev *add_device(char *devname, int erase_size)
+static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname, int timeout)
{
const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL;
- struct block_device *bdev;
+ struct block_device *bdev = ERR_PTR(-ENODEV);
struct block2mtd_dev *dev;
+ struct mtd_partition *part;
char *name;
+ int i;

if (!devname)
return NULL;
@@ -225,15 +236,28 @@ static struct block2mtd_dev *add_device(

/* Get a handle on the device */
bdev = blkdev_get_by_path(devname, mode, dev);
-#ifndef MODULE
- if (IS_ERR(bdev)) {

- /* We might not have rootfs mounted at this point. Try
- to resolve the device name by other means. */
-
- dev_t devt = name_to_dev_t(devname);
- if (devt)
- bdev = blkdev_get_by_dev(devt, mode, dev);
+#ifndef MODULE
+/*
+* We might not have the root device mounted at this point.
+* Try to resolve the device name by other means.
+*/
+ for (i = 0; IS_ERR(bdev) && i <= timeout; i++) {
+ dev_t devt;
+
+ if (i)
+ /*
+ * Calling wait_for_device_probe in the first loop
+ * was not enough, sleep for a bit in subsequent
+ * go-arounds.
+ */
+ msleep(1000);
+ wait_for_device_probe();
+
+ devt = name_to_dev_t(devname);
+ if (!devt)
+ continue;
+ bdev = blkdev_get_by_dev(devt, mode, dev);
}
#endif

@@ -257,13 +281,14 @@ static struct block2mtd_dev *add_device(

/* Setup the MTD structure */
/* make the name contain the block device in */
- name = kasprintf(GFP_KERNEL, "block2mtd: %s", devname);
+ if (!mtdname)
+ mtdname = devname;
+ name = kstrdup (mtdname, GFP_KERNEL);
if (!name)
goto err_destroy_mutex;

dev->mtd.name = name;
-
- dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
+ dev->mtd.size = dev->blkdev->bd_inode->i_size & ~(erase_size - 1);
dev->mtd.erasesize = erase_size;
dev->mtd.writesize = 1;
dev->mtd.writebufsize = PAGE_SIZE;
@@ -276,15 +301,19 @@ static struct block2mtd_dev *add_device(
dev->mtd.priv = dev;
dev->mtd.owner = THIS_MODULE;

- if (mtd_device_register(&dev->mtd, NULL, 0)) {
+ part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
+ part->name = name;
+ part->offset = 0;
+ part->size = dev->mtd.size;
+ if (mtd_device_register(&dev->mtd, part, 1)) {
/* Device didn't get added, so free the entry */
goto err_destroy_mutex;
}
+
list_add(&dev->list, &blkmtd_device_list);
pr_info("mtd%d: [%s] erase_size = %dKiB [%d]\n",
dev->mtd.index,
- dev->mtd.name + strlen("block2mtd: "),
- dev->mtd.erasesize >> 10, dev->mtd.erasesize);
+ mtdname, dev->mtd.erasesize >> 10, dev->mtd.erasesize);
return dev;

err_destroy_mutex:
@@ -353,11 +382,12 @@ static char block2mtd_paramline[80 + 12]

static int block2mtd_setup2(const char *val)
{
- char buf[80 + 12]; /* 80 for device, 12 for erase size */
+ char buf[80 + 12 + 80 + 8]; /* 80 for device, 12 for erase size, 80 for name, 8 for timeout */
char *str = buf;
- char *token[2];
+ char *token[4];
char *name;
size_t erase_size = PAGE_SIZE;
+ unsigned long timeout = MTD_DEFAULT_TIMEOUT;
int i, ret;

if (strnlen(val, sizeof(buf)) >= sizeof(buf)) {
@@ -368,7 +398,7 @@ static int block2mtd_setup2(const char *
strcpy(str, val);
kill_final_newline(str);

- for (i = 0; i < 2; i++)
+ for (i = 0; i < 4; i++)
token[i] = strsep(&str, ",");

if (str) {
@@ -395,7 +425,13 @@ static int block2mtd_setup2(const char *
}
}

- add_device(name, erase_size);
+ if (token[2] && (strlen(token[2]) + 1 > 80))
+ pr_err("mtd device name too long");
+
+
+ if (token[3] && kstrtoul(token[3], 0, &timeout))
+ pr_err("invalid timeout");
+ add_device(name, erase_size, token[2], timeout);

return 0;
}
@@ -429,7 +465,7 @@ static int block2mtd_setup(const char *v


module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
-MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
+MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>[,<timeout>]]]\"");

static int __init block2mtd_init(void)
{
@@ -463,8 +499,7 @@ static void block2mtd_exit(void)
}
}

-
-module_init(block2mtd_init);
+late_initcall(block2mtd_init);
module_exit(block2mtd_exit);

MODULE_LICENSE("GPL");
---
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/