[PATCH v7 1/2] usb: host: xhci-plat: Get PHYs for xhci's hcds

From: Vivek Gautam
Date: Fri Oct 31 2014 - 09:26:53 EST


The host controller by itself may sometimes need to handle PHY
and re-initialize it to re-configure some of the PHY parameters
to get full support out of the PHY controller.
Therefore, facilitate getting the two possible PHYs, viz.
USB 2.0 type (UTMI+) and USB 3.0 type (PIPE3), and initialize them.

Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
---
drivers/usb/host/xhci-plat.c | 74 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 74 insertions(+)

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 3d78b0c..5207d5b 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -16,6 +16,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
#include <linux/slab.h>
#include <linux/usb/xhci_pdriver.h>

@@ -129,10 +130,41 @@ static int xhci_plat_probe(struct platform_device *pdev)
goto put_hcd;
}

+ /* Get possile USB 2.0 type PHY (UTMI+) available with xhci */
+ hcd->phy = devm_phy_get(&pdev->dev, "usb2-phy");
+ if (IS_ERR(hcd->phy)) {
+ ret = PTR_ERR(hcd->phy);
+ if (ret == -EPROBE_DEFER) {
+ goto disable_clk;
+ } else if (ret != -ENOSYS && ret != -ENODEV) {
+ hcd->phy = NULL;
+ dev_warn(&pdev->dev,
+ "Error retrieving usb2 phy: %d\n", ret);
+ }
+ }
+
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret)
goto disable_clk;

+ /*
+ * Initialize and power-on USB 2.0 PHY
+ * FIXME: Isn't this a hacky way of initializing the PHY again ?
+ * xhci's parent would have already initialized the PHY, but we
+ * wanna do it again.
+ */
+ hcd->phy->init_count = 0;
+ ret = phy_init(hcd->phy);
+ if (ret)
+ goto dealloc_usb2_hcd;
+
+ hcd->phy->power_count = 0;
+ ret = phy_power_on(hcd->phy);
+ if (ret) {
+ phy_exit(hcd->phy);
+ goto dealloc_usb2_hcd;
+ }
+
device_wakeup_enable(hcd->self.controller);

/* USB 2.0 roothub is stored in the platform_device now. */
@@ -158,12 +190,41 @@ static int xhci_plat_probe(struct platform_device *pdev)
if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
xhci->shared_hcd->can_do_streams = 1;

+ /* Get possile USB 3.0 type PHY (PIPE3) available with xhci */
+ xhci->shared_hcd->phy = devm_phy_get(&pdev->dev, "usb3-phy");
+ if (IS_ERR(xhci->shared_hcd->phy)) {
+ ret = PTR_ERR(xhci->shared_hcd->phy);
+ if (ret == -EPROBE_DEFER) {
+ goto put_usb3_hcd;
+ } else if (ret != -ENOSYS && ret != -ENODEV) {
+ xhci->shared_hcd->phy = NULL;
+ dev_warn(&pdev->dev,
+ "Error retrieving usb3 phy: %d\n", ret);
+ }
+ }
+
ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
if (ret)
goto put_usb3_hcd;

+ /* Initialize and power-on USB 3.0 PHY */
+ xhci->shared_hcd->phy->init_count = 0;
+ ret = phy_init(xhci->shared_hcd->phy);
+ if (ret)
+ goto dealloc_usb3_hcd;
+
+ xhci->shared_hcd->phy->power_count = 0;
+ ret = phy_power_on(xhci->shared_hcd->phy);
+ if (ret) {
+ phy_exit(xhci->shared_hcd->phy);
+ goto dealloc_usb3_hcd;
+ }
+
return 0;

+dealloc_usb3_hcd:
+ usb_remove_hcd(xhci->shared_hcd);
+
put_usb3_hcd:
usb_put_hcd(xhci->shared_hcd);

@@ -186,9 +247,15 @@ static int xhci_plat_remove(struct platform_device *dev)
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct clk *clk = xhci->clk;

+ phy_power_off(xhci->shared_hcd->phy);
+ phy_exit(xhci->shared_hcd->phy);
+
usb_remove_hcd(xhci->shared_hcd);
usb_put_hcd(xhci->shared_hcd);

+ phy_power_off(hcd->phy);
+ phy_exit(hcd->phy);
+
usb_remove_hcd(hcd);
if (!IS_ERR(clk))
clk_disable_unprepare(clk);
@@ -204,6 +271,8 @@ static int xhci_plat_suspend(struct device *dev)
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);

+ phy_exit(hcd->phy);
+
return xhci_suspend(xhci);
}

@@ -211,6 +280,11 @@ static int xhci_plat_resume(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ int ret;
+
+ ret = phy_init(hcd->phy);
+ if (ret)
+ return ret;

return xhci_resume(xhci, 0);
}
--
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/