Re: [PATCHv5] clk: ppc-corenet: rename to qoriq and add CLK_OF_DECLARE support

From: Scott Wood
Date: Thu Oct 30 2014 - 19:12:21 EST


The CLK_OF_DECLARE part is addressed by:
http://patchwork.ozlabs.org/patch/400740/
http://patchwork.ozlabs.org/patch/400741/
http://patchwork.ozlabs.org/patch/400742/

...which does what I was asking earlier, getting rid of the (currently
broken due to a misguided attempt to remove an __init warning) platform
driver part rather than maintaining both approaches.

I suggest sending a rename patch that applies after those patches.

-Scott

On Tue, 2014-10-14 at 05:32 -0500, Lu Jingchang-B35083 wrote:
> Hi, Scott and Mike,
>
> Could you please help review this patch. Thanks.
>
> Best Regards,
> Jingchang
>
> >-----Original Message-----
> >From: Jingchang Lu [mailto:jingchang.lu@xxxxxxxxxxxxx]
> >Sent: Friday, October 10, 2014 5:15 PM
> >To: mturquette@xxxxxxxxxx
> >Cc: Wood Scott-B07421; linuxppc-dev@xxxxxxxxxxxxxxxx; linux-
> >kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; Lu
> >Jingchang-B35083
> >Subject: [PATCHv5] clk: ppc-corenet: rename to qoriq and add
> >CLK_OF_DECLARE support
> >
> >The IP is shared by PPC and ARM, this renames it to qoriq for better
> >represention, and this also adds the CLK_OF_DECLARE support for being
> >initialized by of_clk_init() on ARM.
> >
> >Signed-off-by: Jingchang Lu <jingchang.lu@xxxxxxxxxxxxx>
> >---
> >changes in v5:
> > update drivers/cpufreq/Kconfig.powerpc to slect the renamed config option.
> >
> >changes in v4:
> > remove "corenet" literals omitted in v3 remove.
> >
> >changes in v3:
> > generate the patch with -M -C option
> >
> >changes in v2:
> > rename the driver name to ppc-qoriq.c for shared on PPC and ARM.
> >
> > drivers/clk/Kconfig | 10 ++++-----
> > drivers/clk/Makefile | 2 +-
> > drivers/clk/{clk-ppc-corenet.c => clk-qoriq.c} | 29 +++++++++++++++------
> >-----
> > drivers/cpufreq/Kconfig.powerpc | 2 +-
> > 4 files changed, 24 insertions(+), 19 deletions(-) rename
> >drivers/clk/{clk-ppc-corenet.c => clk-qoriq.c} (89%)
> >
> >diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index
> >455fd17..4706a9f 100644
> >--- a/drivers/clk/Kconfig
> >+++ b/drivers/clk/Kconfig
> >@@ -101,12 +101,12 @@ config COMMON_CLK_AXI_CLKGEN
> > Support for the Analog Devices axi-clkgen pcore clock generator
> >for Xilinx
> > FPGAs. It is commonly used in Analog Devices' reference designs.
> >
> >-config CLK_PPC_CORENET
> >- bool "Clock driver for PowerPC corenet platforms"
> >- depends on PPC_E500MC && OF
> >+config CLK_QORIQ
> >+ bool "Clock driver for Freescale QorIQ platforms"
> >+ depends on (PPC_E500MC || ARM) && OF
> > ---help---
> >- This adds the clock driver support for Freescale PowerPC corenet
> >- platforms using common clock framework.
> >+ This adds the clock driver support for Freescale QorIQ platforms
> >+ using common clock framework.
> >
> > config COMMON_CLK_XGENE
> > bool "Clock driver for APM XGene SoC"
> >diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index
> >d5fba5b..4ff94cd 100644
> >--- a/drivers/clk/Makefile
> >+++ b/drivers/clk/Makefile
> >@@ -30,7 +30,7 @@ obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o
> > obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o
> > obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o
> > obj-$(CONFIG_COMMON_CLK_PALMAS) += clk-palmas.o
> >-obj-$(CONFIG_CLK_PPC_CORENET) += clk-ppc-corenet.o
> >+obj-$(CONFIG_CLK_QORIQ) += clk-qoriq.o
> > obj-$(CONFIG_COMMON_CLK_RK808) += clk-rk808.o
> > obj-$(CONFIG_COMMON_CLK_S2MPS11) += clk-s2mps11.o
> > obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o
> >diff --git a/drivers/clk/clk-ppc-corenet.c b/drivers/clk/clk-qoriq.c
> >similarity index 89% rename from drivers/clk/clk-ppc-corenet.c rename to
> >drivers/clk/clk-qoriq.c index 8e58edf..48cb923 100644
> >--- a/drivers/clk/clk-ppc-corenet.c
> >+++ b/drivers/clk/clk-qoriq.c
> >@@ -5,7 +5,7 @@
> > * it under the terms of the GNU General Public License version 2 as
> > * published by the Free Software Foundation.
> > *
> >- * clock driver for Freescale PowerPC corenet SoCs.
> >+ * clock driver for Freescale QorIQ SoCs.
> > */
> > #include <linux/clk-provider.h>
> > #include <linux/io.h>
> >@@ -155,7 +155,7 @@ static void __init core_pll_init(struct device_node
> >*np)
> >
> > base = of_iomap(np, 0);
> > if (!base) {
> >- pr_err("clk-ppc: iomap error\n");
> >+ pr_err("clk-qoriq: iomap error\n");
> > return;
> > }
> >
> >@@ -252,7 +252,7 @@ static void __init sysclk_init(struct device_node
> >*node)
> > u32 rate;
> >
> > if (!np) {
> >- pr_err("ppc-clk: could not get parent node\n");
> >+ pr_err("qoriq-clk: could not get parent node\n");
> > return;
> > }
> >
> >@@ -278,30 +278,35 @@ static const struct of_device_id clk_match[]
> >__initconst = {
> > {}
> > };
> >
> >-static int __init ppc_corenet_clk_probe(struct platform_device *pdev)
> >+static int __init qoriq_clk_probe(struct platform_device *pdev)
> > {
> > of_clk_init(clk_match);
> >
> > return 0;
> > }
> >
> >-static const struct of_device_id ppc_clk_ids[] __initconst = {
> >+static const struct of_device_id qoriq_clk_ids[] __initconst = {
> > { .compatible = "fsl,qoriq-clockgen-1.0", },
> > { .compatible = "fsl,qoriq-clockgen-2.0", },
> > {}
> > };
> >
> >-static struct platform_driver ppc_corenet_clk_driver __initdata = {
> >+static struct platform_driver qoriq_clk_driver __initdata = {
> > .driver = {
> >- .name = "ppc_corenet_clock",
> >+ .name = "qoriq_clock",
> > .owner = THIS_MODULE,
> >- .of_match_table = ppc_clk_ids,
> >+ .of_match_table = qoriq_clk_ids,
> > },
> >- .probe = ppc_corenet_clk_probe,
> >+ .probe = qoriq_clk_probe,
> > };
> >
> >-static int __init ppc_corenet_clk_init(void)
> >+static int __init qoriq_clk_init(void)
> > {
> >- return platform_driver_register(&ppc_corenet_clk_driver);
> >+ return platform_driver_register(&qoriq_clk_driver);
> > }
> >-subsys_initcall(ppc_corenet_clk_init);
> >+subsys_initcall(qoriq_clk_init);
> >+
> >+CLK_OF_DECLARE(qoriq_core_pll_v1, "fsl,qoriq-core-pll-1.0",
> >+core_pll_init); CLK_OF_DECLARE(qoriq_core_pll_v2,
> >+"fsl,qoriq-core-pll-2.0", core_pll_init);
> >+CLK_OF_DECLARE(qoriq_core_mux_v1, "fsl,qoriq-core-mux-1.0",
> >+core_mux_init); CLK_OF_DECLARE(qoriq_core_mux_v2,
> >+"fsl,qoriq-core-mux-2.0", core_mux_init);
> >diff --git a/drivers/cpufreq/Kconfig.powerpc
> >b/drivers/cpufreq/Kconfig.powerpc index 72564b7..7ea2441 100644
> >--- a/drivers/cpufreq/Kconfig.powerpc
> >+++ b/drivers/cpufreq/Kconfig.powerpc
> >@@ -26,7 +26,7 @@ config CPU_FREQ_MAPLE
> > config PPC_CORENET_CPUFREQ
> > tristate "CPU frequency scaling driver for Freescale E500MC SoCs"
> > depends on PPC_E500MC && OF && COMMON_CLK
> >- select CLK_PPC_CORENET
> >+ select CLK_QORIQ
> > help
> > This adds the CPUFreq driver support for Freescale e500mc,
> > e5500 and e6500 series SoCs which are capable of changing
> >--
> >1.8.0
>


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/