[PATCH v2] ARM: dts: rockchip: use internal pull-up resistors on I2C busses

From: Julien CHAUVEAU
Date: Tue Oct 28 2014 - 09:03:25 EST


According to the I2C bus specification, it is required to use pull-up resistors
on the clock and data lines. Probing the I2C busses with i2cdetect results in
bad results when no devices are connected and no external resistors are used.

This patch configures the I2C busses to use the internal pull-up resistors
on the RK3066, RK3188 and RK3288 Rockchip processors. It should also be noted
that these default pull settings match the original configuration on these SoCs.

Below is the results of using i2cdetect on a I2C bus with no devices connected
before (1) and after (2) applying this patch.

(1) root@localhost:~# i2cdetect -y 3
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
10: 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
20: 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
30: -- -- -- -- -- rk3x-i2c 2005a000.i2c: timeout, ipd: 0x81, state: 2
-- rk3x-i2c 2005a000.i2c: timeout, ipd: 0x80, state: 2
-- rk3x-i2c 2005a000.i2c: timeout, ipd: 0x80, state: 2
-- rk3x-i2c 2005a000.i2c: timeout, ipd: 0x80, state: 3
-- rk3x-i2c 2005a000.i2c: timeout, ipd: 0x80, state: 3
-- rk3x-i2c 2005a000.i2c: timeout, ipd: 0x80, state: 3
...

(2) root@localhost:~# i2cdetect -y 3
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --

Signed-off-by: Julien CHAUVEAU <julien.chauveau@xxxxxxxxxxxxxxxxxxx>
---
Changes since v1:
- fix the rk3066a pull settings (only available is pull_none/pull_default)
- remove the warnings in the results of i2cdetect

arch/arm/boot/dts/rk3066a.dtsi | 20 ++++++++++----------
arch/arm/boot/dts/rk3188.dtsi | 20 ++++++++++----------
arch/arm/boot/dts/rk3288.dtsi | 24 ++++++++++++------------
3 files changed, 32 insertions(+), 32 deletions(-)

diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index ad9c2db..dbc1a0b 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -202,36 +202,36 @@

i2c0 {
i2c0_xfer: i2c0-xfer {
- rockchip,pins = <RK_GPIO2 28 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO2 29 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <RK_GPIO2 28 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO2 29 RK_FUNC_1 &pcfg_pull_default>;
};
};

i2c1 {
i2c1_xfer: i2c1-xfer {
- rockchip,pins = <RK_GPIO2 30 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO2 31 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <RK_GPIO2 30 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO2 31 RK_FUNC_1 &pcfg_pull_default>;
};
};

i2c2 {
i2c2_xfer: i2c2-xfer {
- rockchip,pins = <RK_GPIO3 0 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <RK_GPIO3 0 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_default>;
};
};

i2c3 {
i2c3_xfer: i2c3-xfer {
- rockchip,pins = <RK_GPIO3 2 RK_FUNC_2 &pcfg_pull_none>,
- <RK_GPIO3 3 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <RK_GPIO3 2 RK_FUNC_2 &pcfg_pull_default>,
+ <RK_GPIO3 3 RK_FUNC_2 &pcfg_pull_default>;
};
};

i2c4 {
i2c4_xfer: i2c4-xfer {
- rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_default>;
};
};

diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index ddaada7..ee2865f 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -188,36 +188,36 @@

i2c0 {
i2c0_xfer: i2c0-xfer {
- rockchip,pins = <RK_GPIO1 24 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO1 25 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <RK_GPIO1 24 RK_FUNC_1 &pcfg_pull_up>,
+ <RK_GPIO1 25 RK_FUNC_1 &pcfg_pull_up>;
};
};

i2c1 {
i2c1_xfer: i2c1-xfer {
- rockchip,pins = <RK_GPIO1 26 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO1 27 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <RK_GPIO1 26 RK_FUNC_1 &pcfg_pull_up>,
+ <RK_GPIO1 27 RK_FUNC_1 &pcfg_pull_up>;
};
};

i2c2 {
i2c2_xfer: i2c2-xfer {
- rockchip,pins = <RK_GPIO1 28 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO1 29 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <RK_GPIO1 28 RK_FUNC_1 &pcfg_pull_up>,
+ <RK_GPIO1 29 RK_FUNC_1 &pcfg_pull_up>;
};
};

i2c3 {
i2c3_xfer: i2c3-xfer {
- rockchip,pins = <RK_GPIO3 14 RK_FUNC_2 &pcfg_pull_none>,
- <RK_GPIO3 15 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <RK_GPIO3 14 RK_FUNC_2 &pcfg_pull_up>,
+ <RK_GPIO3 15 RK_FUNC_2 &pcfg_pull_up>;
};
};

i2c4 {
i2c4_xfer: i2c4-xfer {
- rockchip,pins = <RK_GPIO1 30 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO1 31 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <RK_GPIO1 30 RK_FUNC_1 &pcfg_pull_up>,
+ <RK_GPIO1 31 RK_FUNC_1 &pcfg_pull_up>;
};
};

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 874e66d..9a4b1f7 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -636,43 +636,43 @@

i2c0 {
i2c0_xfer: i2c0-xfer {
- rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>,
- <0 16 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_up>,
+ <0 16 RK_FUNC_1 &pcfg_pull_up>;
};
};

i2c1 {
i2c1_xfer: i2c1-xfer {
- rockchip,pins = <8 4 RK_FUNC_1 &pcfg_pull_none>,
- <8 5 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <8 4 RK_FUNC_1 &pcfg_pull_up>,
+ <8 5 RK_FUNC_1 &pcfg_pull_up>;
};
};

i2c2 {
i2c2_xfer: i2c2-xfer {
- rockchip,pins = <6 9 RK_FUNC_1 &pcfg_pull_none>,
- <6 10 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <6 9 RK_FUNC_1 &pcfg_pull_up>,
+ <6 10 RK_FUNC_1 &pcfg_pull_up>;
};
};

i2c3 {
i2c3_xfer: i2c3-xfer {
- rockchip,pins = <2 16 RK_FUNC_1 &pcfg_pull_none>,
- <2 17 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <2 16 RK_FUNC_1 &pcfg_pull_up>,
+ <2 17 RK_FUNC_1 &pcfg_pull_up>;
};
};

i2c4 {
i2c4_xfer: i2c4-xfer {
- rockchip,pins = <7 17 RK_FUNC_1 &pcfg_pull_none>,
- <7 18 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <7 17 RK_FUNC_1 &pcfg_pull_up>,
+ <7 18 RK_FUNC_1 &pcfg_pull_up>;
};
};

i2c5 {
i2c5_xfer: i2c5-xfer {
- rockchip,pins = <7 19 RK_FUNC_1 &pcfg_pull_none>,
- <7 20 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <7 19 RK_FUNC_1 &pcfg_pull_up>,
+ <7 20 RK_FUNC_1 &pcfg_pull_up>;
};
};

--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/