Re: [PATCH v3] thermal: Add QPNP PMIC temperature alarm driver

From: Ivan T. Ivanov
Date: Mon Oct 27 2014 - 11:32:55 EST



ping?

On Thu, 2014-10-16 at 17:03 +0300, Ivan T. Ivanov wrote:
> No responses. Probably because maintainers are
> in CC: and not in To:, fixing this.
>
> Ivan
>
> On Wed, 2014-10-01 at 18:53 +0300, Ivan T. Ivanov wrote:
> > Add support for the temperature alarm peripheral found inside
> > Qualcomm plug-and-play (QPNP) PMIC chips. The temperature alarm
> > peripheral outputs a pulse on an interrupt line whenever the
> > thermal over temperature stage value changes. Implement an ISR
> > to manage this interrupt.
> >
> > Register a thermal zone device in sysfs with multiple trip points
> > corresponding to the physical threshold temperatures between over
> > temperature stages. The temperature reported by this thermal
> > zone device should reflect the actual PMIC die temperature if an
> > ADC is present on the given PMIC. If no ADC is present, then the
> > reported temperature should be estimated from the over
> > temperature stage value.
> >
> > Send a notification to userspace via sysfs_notify() whenever the
> > over temperature stage value changes.
> >
> > Cc: David Collins <collinsd@xxxxxxxxxxxxxx>
> > Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxxxxx>
> > ---
> >
> > Changes since v2:
> >
> > - Fixed review comments from Kiran Padwal
> > - Files renamed from qpnp-* to qcom-spmi-* to be inline with
> > other PMIC sub-function drivers like qcom-spmi-iadc and
> > qcom-spmi-vadc.
> >
> > v2: http://www.gossamer-threads.com/lists/linux/kernel/2017366
> >
> > .../bindings/thermal/qcom-spmi-temp-alarm.txt | 26 ++
> > drivers/thermal/Kconfig | 13 +
> > drivers/thermal/Makefile | 1 +
> > drivers/thermal/qcom-spmi-temp-alarm.c | 517
> > +++++++++++++++++++++
> > 4 files changed, 557 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
> > create mode 100644 drivers/thermal/qcom-spmi-temp-alarm.c
> >
> > diff --git
> > a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
> > b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
> > new file mode 100644
> > index 0000000..afa908c
> > --- /dev/null
> > +++
> > b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
> > @@ -0,0 +1,26 @@
> > +Qualcomm QPNP PMIC Temperature Alarm
> > +
> > +QPNP temperature alarm peripherals are found inside of Qualcomm
> > PMIC chips
> > +that utilize the Qualcomm SPMI implementation. These peripherals
> > provide an
> > +interrupt signal and status register to identify high PMIC die
> > temperature.
> > +
> > +Required properties:
> > +- compatible: Should contain "qcom,spmi-temp-alarm".
> > +- reg: Specifies the SPMI address and length of the
> > controller's
> > + registers.
> > +- interrupts: PMIC temperature alarm interrupt
> > +
> > +Optional properties:
> > +- io-channels: Should contain IIO channel specifier for the ADC
> > channel,
> > + which report chip die temperature.
> > +- io-channel-names: Should contain "thermal".
> > +
> > +Example:
> > +
> > +ÂÂÂÂÂÂÂthermal-alarm@2400 {
> > + compatible = "qcom,spmi-temp-alarm";
> > + reg = <0x2400 0x100>;
> > + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
> > + io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
> > + io-channel-names = "thermal";
> > + };
> > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> > index 693208e..6adb661 100644
> > --- a/drivers/thermal/Kconfig
> > +++ b/drivers/thermal/Kconfig
> > @@ -248,4 +248,17 @@ depends on ARCH_STI && OF
> > source "drivers/thermal/st/Kconfig"
> > endmenu
> >
> > +config QCOM_SPMI_TEMP_ALARM
> > + tristate "Qualcomm SPMI PMIC Temperature Alarm"
> > + depends on OF && SPMI && IIO
> > + select REGMAP_SPMI
> > + help
> > + This enables a thermal sysfs driver for Qualcomm
> > plug-and-play (QPNP)
> > + PMIC devices. It shows up in sysfs as a thermal zone with
> > multiple
> > + trip points. The temperature reported by the thermal zone
> > reflects the
> > + real time die temperature if an ADC is present or an
> > estimate of the
> > + temperature based upon the over temperature stage value.
> > Enabling the
> > + thermal zone device via the mode file results in shifting
> > PMIC over
> > + temperature shutdown control from hardware to software.
> > +
> > endif
> > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> > index 31e232f..55f6c23 100644
> > --- a/drivers/thermal/Makefile
> > +++ b/drivers/thermal/Makefile
> > @@ -33,3 +33,4 @@ obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) +=
> > intel_soc_dts_thermal.o
> > obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/
> > obj-$(CONFIG_ACPI_INT3403_THERMAL) += int3403_thermal.o
> > obj-$(CONFIG_ST_THERMAL) += st/
> > +obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) += qcom-spmi-temp-alarm.o
> > diff --git a/drivers/thermal/qcom-spmi-temp-alarm.c
> > b/drivers/thermal/qcom-spmi-temp-alarm.c
> > new file mode 100644
> > index 0000000..5ce0fef
> > --- /dev/null
> > +++ b/drivers/thermal/qcom-spmi-temp-alarm.c
> > @@ -0,0 +1,517 @@
> > +/*
> > + * Copyright (c) 2011-2014, The Linux Foundation. All rights
> > reserved.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > modify
> > + * it under the terms of the GNU General Public License version 2
> > and
> > + * only version 2 as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/delay.h>
> > +#include <linux/err.h>
> > +#include <linux/iio/consumer.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > +#include <linux/thermal.h>
> > +
> > +#define QPNP_TM_REG_TYPE 0x04
> > +#define QPNP_TM_REG_SUBTYPE 0x05
> > +#define QPNP_TM_REG_STATUS 0x08
> > +#define QPNP_TM_REG_SHUTDOWN_CTRL1 0x40
> > +#define QPNP_TM_REG_SHUTDOWN_CTRL2 0x42
> > +#define QPNP_TM_REG_ALARM_CTRL 0x46
> > +
> > +#define QPNP_TM_TYPE 0x09
> > +#define QPNP_TM_SUBTYPE 0x08
> > +
> > +#define STATUS_STAGE_MASK 0x03
> > +
> > +#define SHUTDOWN_CTRL1_OVERRIDE_STAGE3 0x80
> > +#define SHUTDOWN_CTRL1_OVERRIDE_STAGE2 0x40
> > +#define SHUTDOWN_CTRL1_THRESHOLD_MASK 0x03
> > +
> > +#define SHUTDOWN_CTRL2_CLEAR_STAGE3 0x80
> > +#define SHUTDOWN_CTRL2_CLEAR_STAGE2 0x40
> > +
> > +#define ALARM_CTRL_FORCE_ENABLE 0x80
> > +#define ALARM_CTRL_FOLLOW_HW_ENABLE 0x01
> > +
> > +/*
> > + * Trip point values based on threshold control
> > + * 0 = {105 C, 125 C, 145 C}
> > + * 1 = {110 C, 130 C, 150 C}
> > + * 2 = {115 C, 135 C, 155 C}
> > + * 3 = {120 C, 140 C, 160 C}
> > +*/
> > +#define TEMP_STAGE_STEP 20000 /* Stage step: 20.000 C */
> > +#define TEMP_STAGE_HYSTERESIS 2000
> > +
> > +#define TEMP_THRESH_MIN 105000 /* Threshold Min: 105 C */
> > +#define TEMP_THRESH_STEP 5000 /* Threshold step: 5 C */
> > +
> > +#define THRESH_MIN 0
> > +#define THRESH_MAX 3
> > +
> > +/* Trip points from most critical to least critical */
> > +#define TRIP_STAGE3 0
> > +#define TRIP_STAGE2 1
> > +#define TRIP_STAGE1 2
> > +#define TRIP_NUM 3
> > +
> > +/* Delay between TEMP_STAT IRQ going high and status value changing
> > in ms */
> > +#define READ_DELAY_MS 40
> > +
> > +/* Temperature in Milli Celsius reported during stage 0 if no ADC
> > is present */
> > +#define DEFAULT_TEMP 37000
> > +
> > +struct qpnp_tm_chip {
> > + struct delayed_workwork;
> > + struct regmap*map;
> > + struct device*dev;
> > + struct thermal_zone_device*tz_dev;
> > + enum thermal_device_modemode;
> > + long temp;
> > + unsigned intthresh;
> > + unsigned intstage;
> > + unsigned intprev_stage;
> > + unsigned intbase;
> > + struct iio_channel*adc;
> > +};
> > +
> > +static int qpnp_tm_read(struct qpnp_tm_chip *chip, u16 addr, u8
> > *data)
> > +{
> > + unsigned int val;
> > + int ret;
> > +
> > + ret = regmap_read(chip->map, chip->base + addr, &val);
> > + if (ret < 0)
> > + return ret;
> > +
> > + *data = val;
> > + return 0;
> > +}
> > +
> > +static int qpnp_tm_write(struct qpnp_tm_chip *chip, u16 addr, u8
> > data)
> > +{
> > + return regmap_write(chip->map, chip->base + addr, data);
> > +}
> > +
> > +static int qpnp_tm_shutdown_override(struct qpnp_tm_chip *chip,
> > bool enable)
> > +{
> > + u8 reg;
> > +
> > + reg = chip->thresh & SHUTDOWN_CTRL1_THRESHOLD_MASK;
> > +
> > + if (enable) {
> > + reg |= SHUTDOWN_CTRL1_OVERRIDE_STAGE2;
> > + reg |= SHUTDOWN_CTRL1_OVERRIDE_STAGE3;
> > + }
> > +
> > + return qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg);
> > +}
> > +
> > +/*
> > + * This function updates the internal temp value based on the
> > + * current thermal stage and threshold as well as the previous stage
> > + */
> > +static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip)
> > +{
> > + unsigned int stage;
> > + int ret;
> > + u8 reg = 0;
> > +
> > + ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, &reg);
> > + if (ret < 0)
> > + return ret;
> > +
> > + stage = reg & STATUS_STAGE_MASK;
> > +
> > + if (stage > chip->stage) {
> > + /* increasing stage, use lower bound */
> > + chip->temp = (stage - 1) * TEMP_STAGE_STEP +
> > + chip->thresh * TEMP_THRESH_STEP +
> > + TEMP_STAGE_HYSTERESIS + TEMP_THRESH_MIN;
> > + } else if (stage < chip->stage) {
> > + /* decreasing stage, use upper bound */
> > + chip->temp = stage * TEMP_STAGE_STEP +
> > + chip->thresh * TEMP_THRESH_STEP -
> > + TEMP_STAGE_HYSTERESIS + TEMP_THRESH_MIN;
> > + }
> > +
> > + chip->stage = stage;
> > +
> > + return 0;
> > +}
> > +
> > +static int qpnp_tz_get_temp(struct thermal_zone_device *thermal,
> > + unsigned long *temp)
> > +{
> > + struct qpnp_tm_chip *chip = thermal->devdata;
> > + int ret, mili_celsius;
> > +
> > + if (!temp)
> > + return -EINVAL;
> > +
> > + if (IS_ERR(chip->adc)) {
> > + ret = qpnp_tm_update_temp_no_adc(chip);
> > + if (ret < 0)
> > + return ret;
> > + } else {
> > + ret = iio_read_channel_processed(chip->adc, &mili_celsius);
> > + if (ret < 0)
> > + return ret;
> > +
> > + chip->temp = mili_celsius;
> > + }
> > +
> > + *temp = chip->temp < 0 ? 0 : chip->temp;
> > +
> > + return 0;
> > +}
> > +
> > +static int qpnp_tz_get_mode(struct thermal_zone_device *thermal,
> > + enum thermal_device_mode *mode)
> > +{
> > + struct qpnp_tm_chip *chip = thermal->devdata;
> > +
> > + if (!mode)
> > + return -EINVAL;
> > +
> > + *mode = chip->mode;
> > +
> > + return 0;
> > +}
> > +
> > +static int qpnp_tz_set_mode(struct thermal_zone_device *thermal,
> > + enum thermal_device_mode mode)
> > +{
> > + struct qpnp_tm_chip *chip = thermal->devdata;
> > + int ret;
> > +
> > + if (mode == chip->mode)
> > + return 0;
> > +
> > + if (mode == THERMAL_DEVICE_ENABLED)
> > + ret = qpnp_tm_shutdown_override(chip, true);
> > + else
> > + ret = qpnp_tm_shutdown_override(chip, false);
> > +
> > + chip->mode = mode;
> > +
> > + return ret;
> > +}
> > +
> > +static int qpnp_tz_get_trip_type(struct thermal_zone_device
> > *thermal, int trip,
> > + enum thermal_trip_type *type)
> > +{
> > + if (trip < 0 || !type)
> > + return -EINVAL;
> > +
> > + switch (trip) {
> > + case TRIP_STAGE3:
> > + *type = THERMAL_TRIP_CRITICAL;
> > + break;
> > + case TRIP_STAGE2:
> > + *type = THERMAL_TRIP_HOT;
> > + break;
> > + case TRIP_STAGE1:
> > + *type = THERMAL_TRIP_HOT;
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int qpnp_tz_get_trip_temp(struct thermal_zone_device
> > *thermal, int trip,
> > + unsigned long *temp)
> > +{
> > + struct qpnp_tm_chip *chip = thermal->devdata;
> > + int thresh_temp;
> > +
> > + if (trip < 0 || !temp)
> > + return -EINVAL;
> > +
> > + thresh_temp = chip->thresh * TEMP_THRESH_STEP +
> > TEMP_THRESH_MIN;
> > +
> > + switch (trip) {
> > + case TRIP_STAGE3:
> > + thresh_temp += 2 * TEMP_STAGE_STEP;
> > + break;
> > + case TRIP_STAGE2:
> > + thresh_temp += TEMP_STAGE_STEP;
> > + break;
> > + case TRIP_STAGE1:
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + *temp = thresh_temp;
> > +
> > + return 0;
> > +}
> > +
> > +static int qpnp_tz_get_crit_temp(struct thermal_zone_device
> > *thermal,
> > + unsigned long *temp)
> > +{
> > + struct qpnp_tm_chip *chip = thermal->devdata;
> > +
> > + if (!temp)
> > + return -EINVAL;
> > +
> > + *temp = chip->thresh * TEMP_THRESH_STEP + TEMP_THRESH_MIN +
> > + 2 * TEMP_STAGE_STEP;
> > +
> > + return 0;
> > +}
> > +
> > +static irqreturn_t qpnp_tm_isr(int irq, void *data)
> > +{
> > + struct qpnp_tm_chip *chip = data;
> > +
> > + schedule_delayed_work(&chip->work,
> > msecs_to_jiffies(READ_DELAY_MS) + 1);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static void qpnp_tm_work(struct work_struct *work)
> > +{
> > + struct delayed_work *dwork;
> > + struct qpnp_tm_chip *chip;
> > + int ret, mili_celsius;
> > + u8 reg;
> > +
> > + dwork = container_of(work, struct delayed_work, work);
> > + chip = container_of(dwork, struct qpnp_tm_chip, work);
> > +
> > + if (IS_ERR(chip->adc)) {
> > + ret = qpnp_tm_update_temp_no_adc(chip);
> > + if (ret < 0)
> > + return;
> > + } else {
> > + ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, &reg);
> > + if (ret < 0)
> > + return;
> > +
> > + chip->stage = reg & STATUS_STAGE_MASK;
> > +
> > + ret = iio_read_channel_processed(chip->adc, &mili_celsius);
> > + if (ret < 0)
> > + return;
> > +
> > + chip->temp = mili_celsius;
> > + }
> > +
> > + if (chip->stage != chip->prev_stage) {
> > + chip->prev_stage = chip->stage;
> > +
> > + dev_warn(chip->dev, "Thermal alarm stage %u, threshold %u,
> > temp %ld mC\n",
> > + chip->stage, chip->thresh, chip->temp);
> > +
> > + thermal_zone_device_update(chip->tz_dev);
> > +
> > + /* Notify user space */
> > + sysfs_notify(&chip->tz_dev->device.kobj, NULL, "type");
> > + }
> > +}
> > +
> > +/*
> > + * This function initializes the internal temp value based on only
> > the
> > + * current thermal stage and threshold. Setup threshold control and
> > + * disable shutdown override.
> > + */
> > +static int qpnp_tm_init(struct qpnp_tm_chip *chip)
> > +{
> > + int ret;
> > + u8 reg;
> > +
> > + chip->thresh = THRESH_MIN;
> > + chip->temp = DEFAULT_TEMP;
> > +
> > + ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, &reg);
> > + if (ret < 0)
> > + return ret;
> > +
> > + chip->stage = reg & STATUS_STAGE_MASK;
> > +
> > + if (chip->stage)
> > + chip->temp = chip->thresh * TEMP_THRESH_STEP +
> > + (chip->stage - 1) * TEMP_STAGE_STEP +
> > + TEMP_THRESH_MIN;
> > +
> > + /*
> > + * Set threshold and disable software override of stage 2 and
> > 3
> > + * shutdowns.
> > + */
> > + reg = chip->thresh & SHUTDOWN_CTRL1_THRESHOLD_MASK;
> > + ret = qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg);
> > + if (ret < 0)
> > + return ret;
> > +
> > + /* Enable the thermal alarm PMIC module in always-on mode. */
> > + reg = ALARM_CTRL_FORCE_ENABLE;
> > + ret = qpnp_tm_write(chip, QPNP_TM_REG_ALARM_CTRL, reg);
> > +
> > + return ret;
> > +}
> > +
> > +static struct thermal_zone_device_ops qpnp_tz_ops = {
> > + .get_temp= qpnp_tz_get_temp,
> > + .get_mode= qpnp_tz_get_mode,
> > + .set_mode= qpnp_tz_set_mode,
> > + .get_trip_type= qpnp_tz_get_trip_type,
> > + .get_trip_temp= qpnp_tz_get_trip_temp,
> > + .get_crit_temp= qpnp_tz_get_crit_temp,
> > +};
> > +
> > +static int qpnp_tm_probe(struct platform_device *pdev)
> > +{
> > + struct qpnp_tm_chip *chip;
> > + struct device_node *node;
> > + u8 type, subtype;
> > + int ret, irq, res[2];
> > +
> > + node = pdev->dev.of_node;
> > +
> > + chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
> > + if (!chip)
> > + return -ENOMEM;
> > +
> > + dev_set_drvdata(&pdev->dev, chip);
> > +
> > + chip->dev = &pdev->dev;
> > + INIT_DELAYED_WORK(&chip->work, qpnp_tm_work);
> > +
> > + chip->map = dev_get_regmap(chip->dev->parent, NULL);
> > + if (!chip->map)
> > + return -ENXIO;
> > +
> > + ret = of_property_read_u32_array(node, "reg", res, 2);
> > + if (ret < 0)
> > + return ret;
> > +
> > + chip->base = res[0];
> > +
> > + ret = qpnp_tm_read(chip, QPNP_TM_REG_TYPE, &type);
> > + if (ret < 0) {
> > + dev_err(&pdev->dev, "could not read type\n");
> > + return ret;
> > + }
> > +
> > + ret = qpnp_tm_read(chip, QPNP_TM_REG_SUBTYPE, &subtype);
> > + if (ret < 0) {
> > + dev_err(&pdev->dev, "could not read subtype\n");
> > + return ret;
> > + }
> > +
> > + if (type != QPNP_TM_TYPE || subtype != QPNP_TM_SUBTYPE) {
> > + dev_err(&pdev->dev, "invalid type 0x%02x or subtype
> > 0x%02x\n",
> > + type, subtype);
> > + return -ENODEV;
> > + }
> > +
> > + irq = platform_get_irq(pdev, 0);
> > + if (irq < 0)
> > + return irq;
> > +
> > + chip->adc = iio_channel_get(chip->dev, "thermal");
> > + if (PTR_ERR(chip->adc) == -EPROBE_DEFER)
> > + return PTR_ERR(chip->adc);
> > +
> > + ret = qpnp_tm_init(chip);
> > + if (ret < 0) {
> > + dev_err(&pdev->dev, "init failed\n");
> > + return ret;
> > + }
> > +
> > + /* Start in HW control. Switch to SW control when user
> > changes mode. */
> > + chip->mode = THERMAL_DEVICE_DISABLED;
> > +
> > + chip->tz_dev = thermal_zone_device_register(node->name,
> > TRIP_NUM, 0,
> > + chip, &qpnp_tz_ops, NULL,
> > + 0, 0);
> > + if (IS_ERR(chip->tz_dev)) {
> > + dev_err(&pdev->dev, "TZ registration failed\n");
> > + return PTR_ERR(chip->tz_dev);
> > + }
> > +
> > + ret = devm_request_irq(chip->dev, irq, qpnp_tm_isr, 0,
> > node->name,
> > + chip);
> > + if (ret < 0)
> > + thermal_zone_device_unregister(chip->tz_dev);
> > +
> > + return ret;
> > +}
> > +
> > +static int qpnp_tm_remove(struct platform_device *pdev)
> > +{
> > + struct qpnp_tm_chip *chip = dev_get_drvdata(&pdev->dev);
> > +
> > + cancel_delayed_work_sync(&chip->work);
> > + thermal_zone_device_unregister(chip->tz_dev);
> > + qpnp_tm_shutdown_override(chip, false);
> > +
> > + return 0;
> > +}
> > +
> > +#ifdef CONFIG_PM_SLEEP
> > +static int qpnp_tm_suspend(struct device *dev)
> > +{
> > + struct qpnp_tm_chip *chip = dev_get_drvdata(dev);
> > +
> > + /* Clear override bits in suspend to allow hardware control
> > */
> > + qpnp_tm_shutdown_override(chip, false);
> > +
> > + return 0;
> > +}
> > +
> > +static int qpnp_tm_resume(struct device *dev)
> > +{
> > + struct qpnp_tm_chip *chip = dev_get_drvdata(dev);
> > +
> > + /* Override hardware actions so software can control */
> > + if (chip->mode == THERMAL_DEVICE_ENABLED)
> > + qpnp_tm_shutdown_override(chip, true);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct dev_pm_ops qpnp_tm_pm_ops = {
> > + SET_SYSTEM_SLEEP_PM_OPS(qpnp_tm_suspend, qpnp_tm_resume)
> > +};
> > +
> > +#define QPNP_TM_PM_OPS (&qpnp_tm_pm_ops)
> > +#else
> > +#define QPNP_TM_PM_OPS NULL
> > +#endif
> > +
> > +static const struct of_device_id qpnp_tm_match_table[] = {
> > + { .compatible = "qcom,spmi-temp-alarm" },
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(of, qpnp_tm_match_table);
> > +
> > +static struct platform_driver qpnp_tm_driver = {
> > + .driver = {
> > + .name = "spmi-temp-alarm",
> > + .of_match_table = qpnp_tm_match_table,
> > + .pm = QPNP_TM_PM_OPS,
> > + },
> > + .probe = qpnp_tm_probe,
> > + .remove = qpnp_tm_remove,
> > +};
> > +module_platform_driver(qpnp_tm_driver);
> > +
> > +MODULE_ALIAS("platform:spmi-temp-alarm");
> > +MODULE_DESCRIPTION("QPNP PMIC Temperature Alarm driver");
> > +MODULE_LICENSE("GPL v2");
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/