Re: [PATCH] cpufreq: intel_pstate: Fix setting max_perf_pct in performance policy

From: Rafael J. Wysocki
Date: Tue Oct 21 2014 - 09:10:32 EST


On Thursday, October 16, 2014 08:05:44 AM Dirk Brandewie wrote:
> On 10/15/2014 04:16 PM, Pali RohÃr wrote:
> > Code which changes policy to powersave changes also max_policy_pct based on
> > max_freq. Code which change max_perf_pct has upper limit base on value
> > max_policy_pct. When policy is changing from powersave back to performance
> > then max_policy_pct is not changed. Which means that changing max_perf_pct is
> > not possible to high values if max_freq was too low in powersave policy.
> >
> > Test case:
> >
> > $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
> > 800000
> > $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
> > 3300000
> > $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
> > performance
> > $ cat /sys/devices/system/cpu/intel_pstate/max_perf_pct
> > 100
> >
> > $ echo powersave > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
> > $ echo 800000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
> > $ echo 20 > /sys/devices/system/cpu/intel_pstate/max_perf_pct
> >
> > $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
> > powersave
> > $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
> > 800000
> > $ cat /sys/devices/system/cpu/intel_pstate/max_perf_pct
> > 20
> >
> > $ echo performance > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
> > $ echo 3300000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
> > $ echo 100 > /sys/devices/system/cpu/intel_pstate/max_perf_pct
> >
> > $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
> > performance
> > $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
> > 3300000
> > $ cat /sys/devices/system/cpu/intel_pstate/max_perf_pct
> > 24
> >
> > And now intel_pstate driver allows to set maximal value for max_perf_pct based
> > on max_policy_pct which is 24 for previous powersave max_freq 800000.
> >
> > This patch will set default value for max_policy_pct when setting policy to
> > performance so it will allow to set also max value for max_perf_pct.
> >
> > Signed-off-by: Pali RohÃr <pali.rohar@xxxxxxxxx>
>
> Acked-by: Dirk Brandewie <dirk.j.brandewie@xxxxxxxxx>

Applied, thanks!

--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/