Re: [PATCH 1/1] pci: fix dmar fault for kdump kernel

From: Takao Indoh
Date: Wed Oct 15 2014 - 04:14:43 EST


(2014/10/14 18:34), Li, ZhenHua wrote:
> I tested on the latest stable version 3.17, it works well.
>
> On 10/10/2014 03:13 PM, Li, Zhen-Hua wrote:
>> On a HP system with Intel vt-d supported and many PCI devices on it,
>> when kernel crashed and the kdump kernel boots with intel_iommu=on,
>> there may be some unexpected DMA requests on this adapter, which will
>> cause DMA Remapping faults like:
>> dmar: DRHD: handling fault status reg 102
>> dmar: DMAR:[DMA Read] Request device [41:00.0] fault addr fff81000
>> DMAR:[fault reason 01] Present bit in root entry is clear
>>
>> This bug may happen on *any* PCI device.
>> Analysis for this bug:
>>
>> The present bit is set in this function:
>>
>> static struct context_entry * device_to_context_entry(
>> struct intel_iommu *iommu, u8 bus, u8 devfn)
>> {
>> ......
>> set_root_present(root);
>> ......
>> }
>>
>> Calling tree:
>> device driver
>> intel_alloc_coherent
>> __intel_map_single
>> domain_context_mapping
>> domain_context_mapping_one
>> device_to_context_entry
>>
>> This means, the present bit in root entry will not be set until the device
>> driver is loaded.
>>
>> But in the kdump kernel, hardware devices are not aware that control has
>> transferred to the second kernel, and those drivers must initialize again.
>> Consequently there may be unexpected DMA requests from devices activity
>> initiated in the first kernel leading to the DMA Remapping errors in the
>> second kernel.
>>
>> To fix this DMAR fault, we need to reset the bus that this device on. Reset
>> the device itself does not work.
>>
>> A patch for this bug that has been sent before:
>> https://lkml.org/lkml/2014/9/30/55
>> As in discussion, this bug may happen on *any* device, so we need to reset all
>> pci devices.
>>
>> There was an original version(Takao Indoh) that resets the pcie devices:
>> https://lkml.org/lkml/2013/5/14/9

As far as I can remember, the original patch was nacked by
the following reasons:

1) On sparc, the IOMMU is initialized before PCI devices are enumerated,
so there would still be a window where ongoing DMA could cause an
IOMMU error.

2) Basically Bjorn is thinking device reset should be done in the
1st kernel before jumping into 2nd kernel.

And Bill Sumner proposed another idea.
http://comments.gmane.org/gmane.linux.kernel.iommu/4828
I don't know the current status of this patch, but I think Jerry Hoemann
is working on this.

Thanks,
Takao Indoh


>>
>> Update of this new version, comparing with Takao Indoh's version:
>> Add support for legacy PCI devices.
>> Use pci_try_reset_bus instead of do_downstream_device_reset in original version
>>
>> Randy Wright corrects some misunderstanding in this description.
>>
>> Signed-off-by: Li, Zhen-Hua <zhen-hual@xxxxxx>
>> Signed-off-by: Takao Indoh <indou.takao@xxxxxxxxxxxxxx>
>> Signed-off-by: Randy Wright <rwright@xxxxxx>
>> ---
>> drivers/pci/pci.c | 84 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 84 insertions(+)
>>
>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>> index 2c9ac70..8cb146c 100644
>> --- a/drivers/pci/pci.c
>> +++ b/drivers/pci/pci.c
>> @@ -23,6 +23,7 @@
>> #include <linux/device.h>
>> #include <linux/pm_runtime.h>
>> #include <linux/pci_hotplug.h>
>> +#include <linux/crash_dump.h>
>> #include <asm-generic/pci-bridge.h>
>> #include <asm/setup.h>
>> #include "pci.h"
>> @@ -4423,6 +4424,89 @@ void __weak pci_fixup_cardbus(struct pci_bus *bus)
>> }
>> EXPORT_SYMBOL(pci_fixup_cardbus);
>>
>> +/*
>> + * Return true if dev is PCI root port or downstream port whose child is PCI
>> + * endpoint except VGA device.
>> + */
>> +static int __pci_dev_need_reset(struct pci_dev *dev)
>> +{
>> + struct pci_bus *subordinate;
>> + struct pci_dev *child;
>> +
>> + if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
>> + return 0;
>> +
>> + if (pci_is_pcie(dev)) {
>> + if ((pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) &&
>> + (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM))
>> + return 0;
>> + }
>> +
>> + subordinate = dev->subordinate;
>> + list_for_each_entry(child, &subordinate->devices, bus_list) {
>> + /* Don't reset switch, bridge, VGA device */
>> + if ((child->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
>> + ((child->class >> 16) == PCI_BASE_CLASS_BRIDGE) ||
>> + ((child->class >> 16) == PCI_BASE_CLASS_DISPLAY))
>> + return 0;
>> +
>> + if (pci_is_pcie(child)) {
>> + if ((pci_pcie_type(child) == PCI_EXP_TYPE_UPSTREAM) ||
>> + (pci_pcie_type(child) == PCI_EXP_TYPE_PCI_BRIDGE))
>> + return 0;
>> + }
>> + }
>> +
>> + return 1;
>> +}
>> +
>> +struct pci_dev_reset_entry {
>> + struct list_head list;
>> + struct pci_dev *dev;
>> +};
>> +int __init pci_reset_endpoints(void)
>> +{
>> + struct pci_dev *dev = NULL;
>> + struct pci_dev_reset_entry *pdev_entry, *tmp;
>> + struct pci_bus *subordinate = NULL;
>> + int has_it;
>> +
>> + LIST_HEAD(pdev_list);
>> +
>> + if (likely(!is_kdump_kernel()))
>> + return 0;
>> +
>> + for_each_pci_dev(dev) {
>> + subordinate = dev->subordinate;
>> + if (!subordinate || list_empty(&subordinate->devices))
>> + continue;
>> +
>> + has_it = 0;
>> + list_for_each_entry(pdev_entry, &pdev_list, list) {
>> + if (dev == pdev_entry->dev) {
>> + has_it = 1;
>> + break;
>> + }
>> + }
>> + if (has_it)
>> + continue;
>> +
>> + if (__pci_dev_need_reset(dev)) {
>> + pdev_entry = kmalloc(sizeof(*pdev_entry), GFP_KERNEL);
>> + pdev_entry->dev = dev;
>> + list_add(&pdev_entry->list, &pdev_list);
>> + }
>> + }
>> +
>> + list_for_each_entry_safe(pdev_entry, tmp, &pdev_list, list) {
>> + pci_try_reset_bus(pdev_entry->dev->subordinate);
>> + kfree(pdev_entry);
>> + }
>> +
>> + return 0;
>> +}
>> +fs_initcall_sync(pci_reset_endpoints);
>> +
>> static int __init pci_setup(char *str)
>> {
>> while (str) {
>>
>
>
>


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/