Re: [PATCH v5 3/4] ARM: tegra: Add thermal trip points for Jetson TK1

[Peter De Schrijver]

On Fri, Oct 03, 2014 at 09:57:24PM +0200, Pavel Machek wrote:
> On Wed 2014-09-24 14:32:06, Eduardo Valentin wrote:
> > Hello Mikko,
> > 
> > On Thu, Aug 21, 2014 at 01:17:21PM +0300, Mikko Perttunen wrote:
> > > This adds critical trip points to the Jetson TK1 device tree.
> > > The device will do a controlled shutdown when either the CPU, GPU
> > > or MEM thermal zone reaches 101 degrees Celsius.
> 
> > > +			trips {
> > > +				trip@0 {
> > > +					temperature = <101000>;
> > > +					hysteresis = <0>;
> > > +					type = "critical";
> > > +				};
> 
> Would it be still time to switch to some more reasonable unit, like
> degrees celsius? milicelsius is a bit of overkill.. ACPI uses
> deciCelsius, but .. celsius should be enough.
> 

We should be using deciKelvin then.

Cheers,

Peter.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/