Re: [PATCH v3 1/3] phy: exynos-dp-video: Use syscon support to control pmu register

From: Kishon Vijay Abraham I
Date: Thu Sep 18 2014 - 01:51:49 EST




On Thursday 18 September 2014 08:55 AM, Vivek Gautam wrote:
> Hi Kishon,
>
>
> On Wed, Sep 17, 2014 at 10:24 PM, Kishon Vijay Abraham I <kishon@xxxxxx> wrote:
>>
>>
>> On Tuesday 16 September 2014 10:32 AM, Vivek Gautam wrote:
>>> Currently the DP_PHY_ENABLE register is mapped in the driver,
>>> and accessed to control power to the PHY.
>>> With mfd-syscon and regmap interface available at our disposal,
>>> it's wise to use that instead of using a 'reg' property for the
>>> controller and allocating a memory resource for that.
>>>
>>> To facilitate this, we have added another compatible string
>>> for Exynso5420 SoC to acquire driver data which contains
>>> different DP-PHY-CONTROL register offset.
>>>
>>> Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
>>> Cc: Jingoo Han <jg1.han@xxxxxxxxxxx>
>>> Cc: Kishon Vijay Abraham I <kishon@xxxxxx>
>>
>> Taking this in linux-phy tree. If someone has already taken this patch, please
>> let me know.
>
> Thanks for taking this. But just one check, i think i need to separate
> out the Documentation
> to a separate patch even before this driver patch. Isn't it ?

no.. that's alright.

Thanks
Kishon
>
>>
>> Thanks
>> Kishon
>>
>>> ---
>>>
>>> Changes since v2:
>>> - Using 'EXYNOS5_PHY_ENABLE' macro instead of 'EXYNOS_DPTX_PHY_ENABLE'
>>> since that's available with us in "linux/mfd/syscon/exynos5-pmu.h" file.
>>>
>>> Changes since v1:
>>> - state->regs should have been "struct regmap *" instead of
>>> "void __iomem *". So corrected the same.
>>>
>>> .../devicetree/bindings/phy/samsung-phy.txt | 7 +-
>>> drivers/phy/phy-exynos-dp-video.c | 79 +++++++++++++-------
>>> 2 files changed, 59 insertions(+), 27 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt
>>> index 7a6feea..15e0f2c 100644
>>> --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt
>>> +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
>>> @@ -17,8 +17,11 @@ Samsung EXYNOS SoC series Display Port PHY
>>> -------------------------------------------------
>>>
>>> Required properties:
>>> -- compatible : should be "samsung,exynos5250-dp-video-phy";
>>> -- reg : offset and length of the Display Port PHY register set;
>>> +- compatible : should be one of the following supported values:
>>> + - "samsung,exynos5250-dp-video-phy"
>>> + - "samsung,exynos5420-dp-video-phy"
>>> +- samsung,pmu-syscon: phandle for PMU system controller interface, used to
>>> + control pmu registers for power isolation.
>>> - #phy-cells : from the generic PHY bindings, must be 0;
>>>
>>> Samsung S5P/EXYNOS SoC series USB PHY
>>> diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c
>>> index 8b3026e..53f44a0 100644
>>> --- a/drivers/phy/phy-exynos-dp-video.c
>>> +++ b/drivers/phy/phy-exynos-dp-video.c
>>> @@ -13,44 +13,55 @@
>>> #include <linux/io.h>
>>> #include <linux/kernel.h>
>>> #include <linux/module.h>
>>> +#include <linux/mfd/syscon.h>
>>> +#include <linux/mfd/syscon/exynos5-pmu.h>
>>> #include <linux/of.h>
>>> #include <linux/of_address.h>
>>> #include <linux/phy/phy.h>
>>> #include <linux/platform_device.h>
>>> +#include <linux/regmap.h>
>>>
>>> -/* DPTX_PHY_CONTROL register */
>>> -#define EXYNOS_DPTX_PHY_ENABLE (1 << 0)
>>> +struct exynos_dp_video_phy_drvdata {
>>> + u32 phy_ctrl_offset;
>>> +};
>>>
>>> struct exynos_dp_video_phy {
>>> - void __iomem *regs;
>>> + struct regmap *regs;
>>> + const struct exynos_dp_video_phy_drvdata *drvdata;
>>> };
>>>
>>> -static int __set_phy_state(struct exynos_dp_video_phy *state, unsigned int on)
>>> +static void exynos_dp_video_phy_pwr_isol(struct exynos_dp_video_phy *state,
>>> + unsigned int on)
>>> {
>>> - u32 reg;
>>> + unsigned int val;
>>> +
>>> + if (IS_ERR(state->regs))
>>> + return;
>>>
>>> - reg = readl(state->regs);
>>> - if (on)
>>> - reg |= EXYNOS_DPTX_PHY_ENABLE;
>>> - else
>>> - reg &= ~EXYNOS_DPTX_PHY_ENABLE;
>>> - writel(reg, state->regs);
>>> + val = on ? 0 : EXYNOS5_PHY_ENABLE;
>>>
>>> - return 0;
>>> + regmap_update_bits(state->regs, state->drvdata->phy_ctrl_offset,
>>> + EXYNOS5_PHY_ENABLE, val);
>>> }
>>>
>>> static int exynos_dp_video_phy_power_on(struct phy *phy)
>>> {
>>> struct exynos_dp_video_phy *state = phy_get_drvdata(phy);
>>>
>>> - return __set_phy_state(state, 1);
>>> + /* Disable power isolation on DP-PHY */
>>> + exynos_dp_video_phy_pwr_isol(state, 0);
>>> +
>>> + return 0;
>>> }
>>>
>>> static int exynos_dp_video_phy_power_off(struct phy *phy)
>>> {
>>> struct exynos_dp_video_phy *state = phy_get_drvdata(phy);
>>>
>>> - return __set_phy_state(state, 0);
>>> + /* Enable power isolation on DP-PHY */
>>> + exynos_dp_video_phy_pwr_isol(state, 1);
>>> +
>>> + return 0;
>>> }
>>>
>>> static struct phy_ops exynos_dp_video_phy_ops = {
>>> @@ -59,11 +70,31 @@ static struct phy_ops exynos_dp_video_phy_ops = {
>>> .owner = THIS_MODULE,
>>> };
>>>
>>> +static const struct exynos_dp_video_phy_drvdata exynos5250_dp_video_phy = {
>>> + .phy_ctrl_offset = EXYNOS5_DPTX_PHY_CONTROL,
>>> +};
>>> +
>>> +static const struct exynos_dp_video_phy_drvdata exynos5420_dp_video_phy = {
>>> + .phy_ctrl_offset = EXYNOS5420_DPTX_PHY_CONTROL,
>>> +};
>>> +
>>> +static const struct of_device_id exynos_dp_video_phy_of_match[] = {
>>> + {
>>> + .compatible = "samsung,exynos5250-dp-video-phy",
>>> + .data = &exynos5250_dp_video_phy,
>>> + }, {
>>> + .compatible = "samsung,exynos5420-dp-video-phy",
>>> + .data = &exynos5420_dp_video_phy,
>>> + },
>>> + { },
>>> +};
>>> +MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match);
>>> +
>>> static int exynos_dp_video_phy_probe(struct platform_device *pdev)
>>> {
>>> struct exynos_dp_video_phy *state;
>>> struct device *dev = &pdev->dev;
>>> - struct resource *res;
>>> + const struct of_device_id *match;
>>> struct phy_provider *phy_provider;
>>> struct phy *phy;
>>>
>>> @@ -71,11 +102,15 @@ static int exynos_dp_video_phy_probe(struct platform_device *pdev)
>>> if (!state)
>>> return -ENOMEM;
>>>
>>> - res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>> -
>>> - state->regs = devm_ioremap_resource(dev, res);
>>> - if (IS_ERR(state->regs))
>>> + state->regs = syscon_regmap_lookup_by_phandle(dev->of_node,
>>> + "samsung,pmu-syscon");
>>> + if (IS_ERR(state->regs)) {
>>> + dev_err(dev, "Failed to lookup PMU regmap\n");
>>> return PTR_ERR(state->regs);
>>> + }
>>> +
>>> + match = of_match_node(exynos_dp_video_phy_of_match, dev->of_node);
>>> + state->drvdata = match->data;
>>>
>>> phy = devm_phy_create(dev, NULL, &exynos_dp_video_phy_ops, NULL);
>>> if (IS_ERR(phy)) {
>>> @@ -89,12 +124,6 @@ static int exynos_dp_video_phy_probe(struct platform_device *pdev)
>>> return PTR_ERR_OR_ZERO(phy_provider);
>>> }
>>>
>>> -static const struct of_device_id exynos_dp_video_phy_of_match[] = {
>>> - { .compatible = "samsung,exynos5250-dp-video-phy" },
>>> - { },
>>> -};
>>> -MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match);
>>> -
>>> static struct platform_driver exynos_dp_video_phy_driver = {
>>> .probe = exynos_dp_video_phy_probe,
>>> .driver = {
>>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/