Re: [PATCH v3 0/9] Tegra xHCI support

[Stephen Warren]

On 09/15/2014 11:06 AM, Andrew Bresticker wrote:
> On Mon, Sep 15, 2014 at 12:00 AM, Tomeu Vizoso <tomeu@xxxxxxxxxxxxxxx> wrote:
> > On 12 September 2014 18:37, Andrew Bresticker <abrestic@xxxxxxxxxxxx> wrote:
> > > On Tue, Sep 9, 2014 at 1:21 AM, Tomeu Vizoso <tomeu@xxxxxxxxxxxxxxx> wrote:
> > > > On 8 September 2014 18:22, Andrew Bresticker <abrestic@xxxxxxxxxxxx> wrote:
> > > > > On Mon, Sep 8, 2014 at 8:34 AM, Tomeu Vizoso <tomeu@xxxxxxxxxxxxxxx> wrote:
> > > > > > On 2 September 2014 23:34, Andrew Bresticker <abrestic@xxxxxxxxxxxx> wrote:
> > > > > > > Tested on Venice2, Jetson TK1, and Big with a variety of USB2.0 and
> > > > > > > USB3.0 memory sticks and ethernet dongles using controller firmware
> > > > > > > recently posted by Andrew Chew [2].
> > > > > >
> > > > > > I have had mixed results when testing this on a Jetson TK1 board. Of 8
> > > > > > USB devices I tested with, about half where probed correctly, but the
> > > > > > other half repeatedly fail in hub_port_init because in the GET_STATUS
> > > > > > right after the reset, the C_PORT_CONNECTION bit is set.
> > > > > >
> > > > > > I don't see any correlation between the failure and the kind of usb
> > > > > > device, but I don't have much experience with USB implementations
> > > > > > either.
> > > > >
> > > > > Hmm... I haven't seen that before.  Which particular devices were you using?
> > > >
> > > > Here they are:
> > > >
> > > > work:
> > > >
> > > > Genius keyboard: 05d5:6782
> > > > Logitech mouse: 046d:c06a
> > > > Denver MP3 player: 10d6:1100
> > > > Atheros Bluetooth dongle: 0cf3:3005
> > > >
> > > > don't work:
> > > >
> > > > MCS7830 ethernet dongle: 9710:7830
> > > > Genesys Logic hub: 05e3:0608
> > >
> > > I tried the hub and it works just fine for me... Have you tried this
> > > on any other boards like Big or Blaze?
> >
> > I have a Blaze here, but haven't been able to get the external ports
> > to power up. I don't have schematics nor a strong interest to get that
> > fixed myself, as I can test my code just fine with the Blaze's
> > internal camera and the devices that do work on the Jetson.
>
> Ok, since Blaze has been announced, hopefully we can post a
> device-tree for it soon.
>
> > I'm using the firmware file that was posted recently:
> >
> > xhci-tegra 70090000.usb: Firmware timestamp: 2014-05-02 02:22:50 UTC,
> > Falcon state 0x20
>
> Yup, I'm using the same firmware.
>
> > If things work for you with the same sources, .config and firmware, I
> > can only think of the hw being different (other hw revision?).
>
> That, or perhaps bootloader differences?  I'm using mainline U-Boot.
>
> Stephen, Thierry, have either of you had a chance to test this series?

I haven't had a chance to yet. I just went to try it out, and found that 
it depends on a whole slew of other patches that I don't have. Is there 
a git branch somewhere to save me having to track down all the dependencies?

Thierry is on vacation right now. I think he was expecting to return 
sometime this week, but the start of his vacation was delayed, so 
perhaps he'll be back a bit later too.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/