[PATCH 0/5] regulator: add support for syr82x to fan53555

[Heiko Stuebner]

Silergy SYR827 and SYR828 regulators use the completely same i2c interface
as the fan53555 regulators - only with different voltage ranges.
They are used in a some Rockchip rk3288 board designs around an act8846.

Therefore first add devicetree support for the fan53555 in general and
then support for the Silgery variants.

Tested on a rk3288 based Netxeon R89 board as cpu voltage regulator.


Heiko Stuebner (5):
  regulator: fan53555: enable vin supply
  regulator: fan53555: set regulator name from constraints name
  dt-bindings: add devicetree bindings for Fairchild FAN53555 regulators
  regulator: fan53555: add devicetree support
  regulator: fan53555: add support for Silergy SYR82x regulators

 .../devicetree/bindings/regulator/fan53555.txt     |  25 ++++
 .../devicetree/bindings/vendor-prefixes.txt        |   2 +
 drivers/regulator/fan53555.c                       | 161 +++++++++++++++++++--
 3 files changed, 174 insertions(+), 14 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/regulator/fan53555.txt

-- 
2.0.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/