Re: [PATCH] mfd: max77686: make interrupts support optional

From: Bartlomiej Zolnierkiewicz
Date: Wed Aug 20 2014 - 05:17:36 EST



Hi,

On Wednesday, August 20, 2014 10:29:39 AM Javier Martinez Canillas wrote:
> Hello Lee, Marek,
>
> On 08/20/2014 10:19 AM, Lee Jones wrote:
> > On Wed, 20 Aug 2014, Marek Szyprowski wrote:
> >
> >> Commit 6f1c1e71d93 ("mfd: max77686: Convert to use regmap_irq") broke
> >> support for boards, which provide no irq for MAX 77686 PMIC. In such
> >> case, not all functions of PMIC are available, but the driver still
> >> should at least handle voltage regulators instead of failing to init.
> >> This patch restores previous behavior.
> >>
> >> Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> >> ---
> >> Hello,
> >>
> >> This patch fixes booting issues with recently merged support for
> >> Exynos4412 based Odroid X2/U3 boards. See
> >> http://www.spinics.net/lists/linux-samsung-soc/msg35773.html
> >> thread for more details.
> >>
> >> Best regards
> >> Marek Szyprowski
> >> Samsung R&D Institute Poland
>
> I already gave my opinion about this patch on thread:
>
> "[PATCH v2 0/4] Add Exynos4412 based Odroid X2 and U2/U3/U3+ support"
>
> where the issue was reported by Olof but I'll add it here as well for
> completeness since I don't know if the same people are cc'ed on both threads.
>
> Bartlomiej Zolnierkiewicz posted a similar patch [0] before but as I said

BTW my patch a bit simpler than this one.

regmap_del_irq_chip() checks for second argument being NULL so it is not
needed to explicitly check for max77686->irq not being zero on probe
failures before calling regmap_del_irq_chip().

> on that thread, I'm not sure if is correct to make that DT property
> optional. Or rather, if we need to make it optional then we should also
> change the Documentation/devicetree/bindings/mfd/max77686.txt that list
> "interrupts" DT property as required.
>
> It's true that before converting the max77686 to use the regmap irq API,
> the driver was loose on that regard but max77686_irq_init() in
> max77686-irq.c was returning -ENODEV when the IRQ was not provided and
> that error code was not checked in max77686_i2c_probe() (which was a bug
> IMHO).
>
> More importantly I wonder if a design where a IRQ line is not connected to
> the max77686 PMIC makes even sense. If such a design is possible then the
> "interrupt" property should be made optional but if not then I think that
> the driver should fail to probe in that case. Yes, it is a regression but
> the Odroid DTS was not following the DT binding and was just lucky that
> the driver was not checking the required DT properties.
>
> Daniel Drake posted the correct fix for the Odroid DTS [1]. So I tend to
> say that Daniel's fix should be added as a -rc fix and we should keep both
> the max77686 driver and its DT binding as it is now but as I said, if from
> a hardware point of view makes sense to leave that line unconnected then I
> don't oppose to this change.
>
> Best regards,
> Javier
>
> [0]: https://lkml.org/lkml/2014/8/7/374
> [1]:
> http://lists.infradead.org/pipermail/linux-arm-kernel/2014-July/272869.html

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/