[PATCH RESEND v3 02/12] usb: dwc2/gadget: fix phy initialization sequence

From: Robert Baldyga
Date: Tue Aug 19 2014 - 04:56:28 EST


From: Kamil Debski <k.debski@xxxxxxxxxxx>

In the Generic PHY Framework a NULL phy is considered to be a valid phy
thus the "if (hsotg->phy)" check does not give us the information whether
the Generic PHY Framework is used.

In addition to the above this patch also removes phy_init from probe and
phy_exit from remove. This is not necessary when init/exit is done in the
s3c_hsotg_phy_enable/disable functions.

Signed-off-by: Kamil Debski <k.debski@xxxxxxxxxxx>
Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Signed-off-by: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
---
drivers/usb/dwc2/gadget.c | 27 ++++++++++++---------------
1 file changed, 12 insertions(+), 15 deletions(-)

diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index d27417e..f0135a5 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -2747,13 +2747,14 @@ static void s3c_hsotg_phy_enable(struct s3c_hsotg *hsotg)

dev_dbg(hsotg->dev, "pdev 0x%p\n", pdev);

- if (hsotg->phy) {
- phy_init(hsotg->phy);
- phy_power_on(hsotg->phy);
- } else if (hsotg->uphy)
+ if (hsotg->uphy)
usb_phy_init(hsotg->uphy);
- else if (hsotg->plat->phy_init)
+ else if (hsotg->plat && hsotg->plat->phy_init)
hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
+ else {
+ phy_init(hsotg->phy);
+ phy_power_on(hsotg->phy);
+ }
}

/**
@@ -2767,13 +2768,14 @@ static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg)
{
struct platform_device *pdev = to_platform_device(hsotg->dev);

- if (hsotg->phy) {
- phy_power_off(hsotg->phy);
- phy_exit(hsotg->phy);
- } else if (hsotg->uphy)
+ if (hsotg->uphy)
usb_phy_shutdown(hsotg->uphy);
- else if (hsotg->plat->phy_exit)
+ else if (hsotg->plat && hsotg->plat->phy_exit)
hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
+ else {
+ phy_power_off(hsotg->phy);
+ phy_exit(hsotg->phy);
+ }
}

/**
@@ -3486,9 +3488,6 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
if (hsotg->phy && (phy_get_bus_width(phy) == 8))
hsotg->phyif = GUSBCFG_PHYIF8;

- if (hsotg->phy)
- phy_init(hsotg->phy);
-
/* usb phy enable */
s3c_hsotg_phy_enable(hsotg);

@@ -3580,8 +3579,6 @@ static int s3c_hsotg_remove(struct platform_device *pdev)
usb_gadget_unregister_driver(hsotg->driver);
}

- if (hsotg->phy)
- phy_exit(hsotg->phy);
clk_disable_unprepare(hsotg->clk);

return 0;
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/