Re: [PATCHv2 5/5] clk: samsung: exynos5410: Added clocks DPLL, EPLL, IPLL, and VPLL

From: Tomasz Figa
Date: Thu Jul 31 2014 - 09:07:33 EST


Hi Humberto,

You can find my comments inline.

On 31.07.2014 13:22, Humberto Silva Naves wrote:
> Added the remaining PLL clocks, and also added the configuration
> tables with the PLL coefficients for the supported frequencies.
> These frequency tables are only installed when a 24MHz clock is
> supplied as the input clock source. To reflect these changes, new
> constants were added to the dt-bindings file.

[snip]

> +static struct samsung_pll_rate_table apll_24mhz_tbl[] __initdata = {
> + /* sorted in descending order */
> + /* PLL_35XX_RATE(rate, m, p, s) */
> + PLL_35XX_RATE(2100000000, 175, 2, 0),
> + PLL_35XX_RATE(2000000000, 250, 3, 0),
> + PLL_35XX_RATE(1900000000, 475, 6, 0),
> + PLL_35XX_RATE(1800000000, 225, 3, 0),
> + PLL_35XX_RATE(1700000000, 425, 6, 0),
> + PLL_35XX_RATE(1600000000, 200, 3, 0),
> + PLL_35XX_RATE(1500000000, 250, 4, 0),
> + PLL_35XX_RATE(1400000000, 175, 3, 0),
> + PLL_35XX_RATE(1300000000, 325, 6, 0),
> + PLL_35XX_RATE(1200000000, 100, 2, 0),
> + PLL_35XX_RATE(1100000000, 275, 3, 1),
> + PLL_35XX_RATE(1000000000, 250, 3, 1),
> + PLL_35XX_RATE(900000000, 150, 2, 1),
> + PLL_35XX_RATE(800000000, 200, 3, 1),
> + PLL_35XX_RATE(700000000, 175, 3, 1),
> + PLL_35XX_RATE(600000000, 100, 2, 1),
> + PLL_35XX_RATE(500000000, 250, 3, 2),
> + PLL_35XX_RATE(400000000, 200, 3, 2),
> + PLL_35XX_RATE(300000000, 100, 2, 2),
> + PLL_35XX_RATE(200000000, 200, 3, 3),

nit: The numbers could be aligned to the right using spaces (see exynos4.c).

> + { },
> +};
> +
> +static struct samsung_pll_rate_table cpll_24mhz_tbl[] __initdata = {
> + /* sorted in descending order */
> + /* PLL_35XX_RATE(rate, m, p, s) */
> + PLL_35XX_RATE(666000000, 222, 4, 1),
> + PLL_35XX_RATE(640000000, 160, 3, 1),
> + PLL_35XX_RATE(320000000, 160, 3, 2),
> + { },
> +};
> +
> +static struct samsung_pll_rate_table dpll_24mhz_tbl[] __initdata = {
> + /* sorted in descending order */
> + /* PLL_35XX_RATE(rate, m, p, s) */
> + PLL_35XX_RATE(600000000, 200, 4, 1),
> + { },
> +};
> +
> +static struct samsung_pll_rate_table epll_24mhz_tbl[] __initdata = {
> + /* sorted in descending order */
> + /* PLL_36XX_RATE(rate, m, p, s, k) */
> + PLL_36XX_RATE(600000000, 100, 2, 1, 0),
> + PLL_36XX_RATE(400000000, 200, 3, 2, 0),
> + PLL_36XX_RATE(200000000, 200, 3, 3, 0),
> + PLL_36XX_RATE(180633600, 301, 5, 3, -3670),
> + PLL_36XX_RATE( 67737600, 452, 5, 5, -27263),
> + PLL_36XX_RATE( 49152000, 197, 3, 5, -25690),
> + PLL_36XX_RATE( 45158401, 181, 3, 5, -24012),

Have you ensured that the rates specified match the rates calculated
using PLL equation? You can find how it is calculated in recalc_rate
callback of this particular PLL type in clk-pll.c.

As a side note, the PLL registration code should be made a bit more
robust and just calculate the rates itself and printing warnings if they
don't match the entered ones. I definitely need more hours in a day, so
much to do. ;)

> + { },
> +};
> +
> +static struct samsung_pll_rate_table ipll_24mhz_tbl[] __initdata = {
> + /* sorted in descending order */
> + /* PLL_35XX_RATE(rate, m, p, s, k) */
> + PLL_35XX_RATE(864000000, 288, 4, 1),
> + PLL_35XX_RATE(666000000, 222, 4, 1),
> + PLL_35XX_RATE(432000000, 288, 4, 2),
> + { },
> +};
> +
> +static struct samsung_pll_rate_table kpll_24mhz_tbl[] __initdata = {
> + /* sorted in descending order */
> + /* PLL_35XX_RATE(rate, m, p, s) */
> + PLL_35XX_RATE(1500000000, 250, 4, 0),
> + PLL_35XX_RATE(1400000000, 175, 3, 0),
> + PLL_35XX_RATE(1300000000, 325, 6, 0),
> + PLL_35XX_RATE(1200000000, 100, 2, 0),
> + PLL_35XX_RATE(1100000000, 275, 3, 1),
> + PLL_35XX_RATE(1000000000, 250, 3, 1),
> + PLL_35XX_RATE(900000000, 150, 2, 1),
> + PLL_35XX_RATE(800000000, 200, 3, 1),
> + PLL_35XX_RATE(700000000, 175, 3, 1),
> + PLL_35XX_RATE(600000000, 100, 2, 1),
> + PLL_35XX_RATE(500000000, 250, 3, 2),
> + PLL_35XX_RATE(400000000, 200, 3, 2),
> + PLL_35XX_RATE(300000000, 100, 2, 2),
> + PLL_35XX_RATE(200000000, 200, 3, 3),

nit: Alignment.

Otherwise looks good, thanks.

Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/