[PATCH v4 0/3] Add ST dwc3 glue layer driver

From: Peter Griffin
Date: Wed Jul 30 2014 - 11:28:29 EST


This series adds support for the ST glue logic which wraps the DWC3 controller
on STiH407 SoC family chipsets.

Changes since v3
- Various formating nits

Changes since v2
- Use dr_mode for host/device static configuration
- Manage shared reset signal to usbss to avoid hang if probing before usb3 phy
- Remove DT checks and make driver depend on OF
- Change some #define to use BIT macro
- Make some comments clearer
- Use kerneldoc for struct documentation
- Remove udelay
- Let DT create platform_devices, and remove legacy alloc
- Change some logging levels to dev_dbg
- Various whitespace and formatting cleanup
- Use SIMPLE_DEV_PM_OPS()
- Add const to of_device struct
- Reorder header files alphabetically
- Use devm_ioremap_resource instead of devm_request_and_ioremap
- Remove of_match_ptr()

Changes since v1
- Fix Kconfig mistake

Peter Griffin (3):
usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
usb: dwc3: dwc3-st: Add st-dwc3 devicetree bindings documentation
MAINTAINERS: Add dwc3-st.c file to ARCH/STI architecture

Documentation/devicetree/bindings/usb/dwc3-st.txt | 69 +++++
MAINTAINERS | 1 +
drivers/usb/dwc3/Kconfig | 9 +
drivers/usb/dwc3/Makefile | 1 +
drivers/usb/dwc3/dwc3-st.c | 336 ++++++++++++++++++++++
5 files changed, 416 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/dwc3-st.txt
create mode 100644 drivers/usb/dwc3/dwc3-st.c

--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/