Re: [PATCH v2 05/11] ARM: dts: zynq: Add QSPI for Parallella

From: Andreas FÃrber
Date: Fri Jul 25 2014 - 04:43:03 EST


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Am 25.07.2014 09:59, schrieb Michal Simek:
> On 07/25/2014 01:18 AM, SÃren Brinkmann wrote:
>> On Fri, 2014-07-25 at 01:00AM +0200, Andreas FÃrber wrote:
>>> Prepare SPI0 and SPI1 while at it.
>
> Patch subject is incorrect. You are adding SPI and QSPI.

Yes, it originally added only QSPI, but I considered it a good deed to
add SPI as well while already reading that part of the TRM. :)

>>>
>>> Signed-off-by: Andreas FÃrber <afaerber@xxxxxxx> --- v2: New
>>>
>>> arch/arm/boot/dts/zynq-7000.dtsi | 37
>>> +++++++++++++++++++++++++++++++++++
>>> arch/arm/boot/dts/zynq-parallella.dts | 4 ++++ 2 files
>>> changed, 41 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/zynq-7000.dtsi
>>> b/arch/arm/boot/dts/zynq-7000.dtsi index 8fd826a..eed3df0
>>> 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++
>>> b/arch/arm/boot/dts/zynq-7000.dtsi @@ -122,6 +122,30 @@
>>> interrupts = <0 50 4>; };
>>>
>>> + spi0: spi@e0006000 { + compatible = "xlnx,zynq-spi-r1p6";
>>> + reg = <0xe0006000 0x1000>; + status = "disabled"; +
>>> interrupt-parent = <&intc>; + interrupts = <0 26 4>; +
>>> clocks = <&clkc 25>, <&clkc 34>; + clock-names = "ref_clk",
>>> "pclk"; + #address-cells = <1>; + #size-cells = <0>; + };
>>> + + spi1: spi@e0007000 { + compatible =
>>> "xlnx,zynq-spi-r1p6"; + reg = <0xe0007000 0x1000>; + status
>>> = "disabled"; + interrupt-parent = <&intc>; + interrupts =
>>> <0 49 4>; + clocks = <&clkc 26>, <&clkc 35>; + clock-names
>>> = "ref_clk", "pclk"; + #address-cells = <1>; + #size-cells
>>> = <0>; + }; +
>> Until here things look good.
>>
>>> gem0: ethernet@e000b000 { compatible = "cdns,gem"; reg =
>>> <0xe000b000 0x4000>; @@ -140,6 +164,19 @@ clock-names = "pclk",
>>> "hclk", "tx_clk"; };
>>>
>>> + qspi: qspi@e000d000 { + compatible =
>>> "xlnx,zynq-spi-r1p6"; + reg = <0xe000d000 0x1000>; + status
>>> = "disabled"; + interrupt-parent = <&intc>; + interrupts =
>>> <0 19 4>; + clocks = <&clkc 10>, <&clkc 43>; + clock-names
>>> = "ref_clk", "pclk"; + num-cs = <1>; + #address-cells =
>>> <1>; + #size-cells = <0>; + }; +
>> I'm not sure what the status of this driver is. I think QSPI is
>> still under review on the mailing lists and I don't think we
>> should add this yet.
>
> Driver for qspi is not in the mainline yet but it doesn't mean that
> this fragment won't work. Harini: Can you please correct me if I am
> wrong?

It did seem to find the flash chip (cf. parallella-next branch), but I
didn't find a driver capable of handling its ID. The downstream tree
was using m25p80; I tried both micron,n25q128a11 and ...a13 based on
U-Boot output.

> I would prefer to send two separate patches.

Will do.

> 1. just add SPI to zynq

As I don't have any of the other Zynq boards, can you please advise
whether either of them should be enabled for some board?

> 2. if Harini confirms that it is working I think that make sense to
> enable at least simple mode for qspi. That's why not a problem to
> add it too. It means qspi patch with enabling for your board as
> second patch.

Thanks,
Andreas

- --
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 NÃrnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix ImendÃrffer; HRB 16746 AG NÃrnberg
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
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=h5eC
-----END PGP SIGNATURE-----
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/