[PATCH 3.11 114/198] watchdog: kempld-wdt: Use the correct value when configuring the prescaler with the watchdog

From: Luis Henriques
Date: Thu Jul 03 2014 - 05:51:41 EST


3.11.10.13 -stable review patch. If anyone has any objections, please let me know.

------------------

From: gundberg <per.gundberg@xxxxxxxxxxx>

commit a9e0436b303e94ba57d3bd4b1fcbeaa744b7ebeb upstream.

Use the prescaler index, rather than its value, to configure the watchdog.
This will prevent a mismatch with the prescaler used to calculate the cycles.

Signed-off-by: Per Gundberg <per.gundberg@xxxxxxxxxxx>
Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Reviewed-by: Michael Brunner <michael.brunner@xxxxxxxxxxx>
Tested-by: Michael Brunner <michael.brunner@xxxxxxxxxxx>
Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx>
Signed-off-by: Luis Henriques <luis.henriques@xxxxxxxxxxxxx>
---
drivers/watchdog/kempld_wdt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/watchdog/kempld_wdt.c b/drivers/watchdog/kempld_wdt.c
index 5c3d4df63e68..22b9a036b3e1 100644
--- a/drivers/watchdog/kempld_wdt.c
+++ b/drivers/watchdog/kempld_wdt.c
@@ -163,7 +163,7 @@ static int kempld_wdt_set_stage_timeout(struct kempld_wdt_data *wdt_data,
kempld_get_mutex(pld);
stage_cfg = kempld_read8(pld, KEMPLD_WDT_STAGE_CFG(stage->id));
stage_cfg &= ~STAGE_CFG_PRESCALER_MASK;
- stage_cfg |= STAGE_CFG_SET_PRESCALER(prescaler);
+ stage_cfg |= STAGE_CFG_SET_PRESCALER(PRESCALER_21);
kempld_write8(pld, KEMPLD_WDT_STAGE_CFG(stage->id), stage_cfg);
kempld_write32(pld, KEMPLD_WDT_STAGE_TIMEOUT(stage->id),
stage_timeout);
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/