Re: [PATCH v2 09/10] mfd: cros_ec: ec_dev->cmd_xfer() returns number of bytes received from EC

[Lee Jones]

On Wed, 18 Jun 2014, Doug Anderson wrote:

> From: Bill Richardson <wfrichar@xxxxxxxxxxxx>
> 
> When communicating with the EC, the cmd_xfer() function should return the
> number of bytes it received from the EC, or negative on error.
> 
> Signed-off-by: Bill Richardson <wfrichar@xxxxxxxxxxxx>
> Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
> Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
> Reviewed-by: Simon Glass <sjg@xxxxxxxxxxxx>
> ---
> Changes in v2: None
> 
>  drivers/i2c/busses/i2c-cros-ec-tunnel.c | 2 +-
>  drivers/mfd/cros_ec_i2c.c               | 2 +-
>  drivers/mfd/cros_ec_spi.c               | 2 +-
>  include/linux/mfd/cros_ec.h             | 8 ++++----
>  4 files changed, 7 insertions(+), 7 deletions(-)

Patch applied with Wolfram's Ack.

Clause: There is a chance that this patch might not be seen in -next
for ~24-48hrs.  If it's not there by 72hrs, feel free to poke.

> diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
> index dd07818..05e033c 100644
> --- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c
> +++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
> @@ -228,7 +228,7 @@ static int ec_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg i2c_msgs[],
>  	msg.insize = response_len;
>  
>  	result = bus->ec->cmd_xfer(bus->ec, &msg);
> -	if (result)
> +	if (result < 0)
>  		goto exit;
>  
>  	result = ec_i2c_parse_response(response, i2c_msgs, &num);
> diff --git a/drivers/mfd/cros_ec_i2c.c b/drivers/mfd/cros_ec_i2c.c
> index 189e7d1..fd7a546 100644
> --- a/drivers/mfd/cros_ec_i2c.c
> +++ b/drivers/mfd/cros_ec_i2c.c
> @@ -111,7 +111,7 @@ static int cros_ec_cmd_xfer_i2c(struct cros_ec_device *ec_dev,
>  		goto done;
>  	}
>  
> -	ret = 0;
> +	ret = i2c_msg[1].buf[1];
>   done:
>  	kfree(in_buf);
>  	kfree(out_buf);
> diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c
> index c975087..2ad6815 100644
> --- a/drivers/mfd/cros_ec_spi.c
> +++ b/drivers/mfd/cros_ec_spi.c
> @@ -324,7 +324,7 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
>  		goto exit;
>  	}
>  
> -	ret = 0;
> +	ret = len;
>  exit:
>  	mutex_unlock(&ec_spi->lock);
>  	return ret;
> diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
> index 1f79f16..0ebf26f 100644
> --- a/include/linux/mfd/cros_ec.h
> +++ b/include/linux/mfd/cros_ec.h
> @@ -41,7 +41,7 @@ enum {
>   * @outdata: Outgoing data to EC
>   * @outsize: Outgoing length in bytes
>   * @indata: Where to put the incoming data from EC
> - * @insize: Incoming length in bytes (filled in by EC)
> + * @insize: Max number of bytes to accept from EC
>   * @result: EC's response to the command (separate from communication failure)
>   */
>  struct cros_ec_command {
> @@ -64,9 +64,9 @@ struct cros_ec_command {
>   * sleep at the last suspend
>   * @event_notifier: interrupt event notifier for transport devices
>   * @cmd_xfer: send command to EC and get response
> - *     Returns 0 if the communication succeeded, but that doesn't mean the EC
> - *     was happy with the command it got. Caller should check msg.result for
> - *     the EC's result code.
> + *     Returns the number of bytes received if the communication succeeded, but
> + *     that doesn't mean the EC was happy with the command. The caller
> + *     should check msg.result for the EC's result code.
>   *
>   * @priv: Private data
>   * @irq: Interrupt to use

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/