Re: [alsa-devel] [PATCH 2/2] ASoC: add driver for Rockchip RK3xxx I2S controller

From: Lars-Peter Clausen
Date: Tue Jul 01 2014 - 05:51:48 EST


On 07/01/2014 10:47 AM, jianqun wrote:
[...]
new file mode 100644
index 0000000..946b60c
--- /dev/null
+++ b/sound/soc/rockchip/Kconfig
@@ -0,0 +1,16 @@
+config SND_SOC_ROCKCHIP
+ tristate "ASoC support for Rockchip"
+ depends on SND_SOC && ARCH_ROCKCHIP

No need for SND_SOC this is implicit for all drivers in sound/soc/. Also allow the driver to be select when COMPILE_TEST is selected.

+ select SND_SOC_GENERIC_DMAENGINE_PCM
+ select SND_ROCKCHIP_PCM
+ select SND_ROCKCHIP_I2S
+ help
+ Say Y or M if you want to add support for codecs attached to
+ the Rockchip SoCs' Audio interfaces. You will also need to
+ select the audio interfaces to support below.
+
[...]
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/version.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <asm/dma.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+#include <sound/dmaengine_pcm.h>

Are you sure that you need all of these includes?

+
[...]
+static struct snd_soc_dai_ops rockchip_i2s_dai_ops = {
const
+ .trigger = rockchip_i2s_trigger,
+ .hw_params = rockchip_i2s_hw_params,
+ .set_fmt = rockchip_i2s_set_fmt,
+ .set_clkdiv = rockchip_i2s_set_clkdiv,
+ .set_sysclk = rockchip_i2s_set_sysclk,
+};
[...]
+static int rockchip_i2s_probe(struct platform_device *pdev)
+{
[...]
+ /* Try to set the I2S Channel id from dt */
+ pdev->id = of_alias_get_id(np, "i2s");
+ dev_set_name(&pdev->dev, "%s.%d",
+ pdev->dev.driver->name,
+ pdev->id);

A device should not change its id or name.

+
+ i2s->dev = &pdev->dev;
+ dev_set_drvdata(&pdev->dev, i2s);
+
+ ret = devm_snd_soc_register_component(&pdev->dev,
+ &rockchip_i2s_component,
+ &rockchip_i2s_dai[pdev->id], 1);

If those are two instances of the same I2S core just use one snd_soc_dai_driver struct. There is no need for the driver to know or care about how many instances of the core the system has.

[...]
+
+static const struct snd_pcm_hardware rockchip_pcm_hardware = {
+ .info = SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_PAUSE |
+ SNDRV_PCM_INFO_RESUME,
+ .formats = SNDRV_PCM_FMTBIT_S24_LE |
+ SNDRV_PCM_FMTBIT_S20_3LE |
+ SNDRV_PCM_FMTBIT_S16_LE,
+ .channels_min = 2,
+ .channels_max = 8,
+ .buffer_bytes_max = 128*1024,
+ .period_bytes_min = 64,
+ .period_bytes_max = 2048*4,
+ .periods_min = 3,
+ .periods_max = 128,
+ .fifo_size = 16,
+};
+
+static const struct snd_dmaengine_pcm_config rockchip_dmaengine_pcm_config = {
+ .pcm_hardware = &rockchip_pcm_hardware,
+ .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
+ .compat_filter_fn = NULL,
+ .prealloc_buffer_size = PAGE_SIZE * 8,
+};
+
+int rockchip_pcm_platform_register(struct device *dev)
+{
+ return snd_dmaengine_pcm_register(dev, &rockchip_dmaengine_pcm_config,
+ SND_DMAENGINE_PCM_FLAG_COMPAT|
+ SND_DMAENGINE_PCM_FLAG_NO_RESIDUE);

We should try to avoid adding new users of the generic dmaengine pcm driver that manually specify a snd_pcm_hardware struct. We now have the infrastructure to autodiscover the capabilities of the DMA via the dmaengine API.

New drivers really should just do snd_dmaengine_pcm_register(dev, NULL, 0);

- Lars
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/