Re: [PATCH v5 2/5] ARM: EXYNOS: Refactored code for using PMU address via DT

[Tomasz Figa]

Hi Pankaj,

This looks much better now, but please see my comments inline.

On 25.06.2014 16:03, Pankaj Dubey wrote:
> Under "arm/mach-exynos" many files are using PMU register offsets.
> Since we have added support for accessing PMU base address via DT,
> now we can remove PMU mapping from exynosX_iodesc. Let's convert
> all these access using iomapped address.
> This will help us in removing static mapping of PMU base address
> as well as help in reducing dependency over machine header files.
> Thus helping for migration of PMU implementation from machine to
> driver folder which can be reused for ARM64 bsed SoC.

[snip]

> @@ -152,7 +142,7 @@ static void exynos_restart(enum reboot_mode mode, const char *cmd)
>  {
>  	struct device_node *np;
>  	u32 val = 0x1;
> -	void __iomem *addr = EXYNOS_SWRESET;
> +	void __iomem *addr = NULL;

Instead of initializing this variable to NULL, pmu_base_addr +
EXYNOS_SWRESET could be used instead.

>  
>  	if (of_machine_is_compatible("samsung,exynos5440")) {
>  		u32 status;
> @@ -165,9 +155,9 @@ static void exynos_restart(enum reboot_mode mode, const char *cmd)
>  		val = __raw_readl(addr);
>  
>  		val = (val & 0xffff0000) | (status & 0xffff);
> -	}
> -
> -	__raw_writel(val, addr);
> +		__raw_writel(val, addr);
> +	} else
> +		__raw_writel(val, pmu_base_addr + EXYNOS_SWRESET);

The above would allow this code to be left unchanged.

>  }
>  

[snip]

> diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
> index f127c0c..519aefe 100644
> --- a/arch/arm/mach-exynos/pm.c
> +++ b/arch/arm/mach-exynos/pm.c
> @@ -37,6 +37,9 @@
>  #include "regs-pmu.h"
>  #include "regs-sys.h"
>  
> +#define pmu_raw_writel(val, offset) \
> +		__raw_writel(val, pmu_base_addr + offset)

Please make this static inline.

> +
>  /**
>   * struct exynos_wkup_irq - Exynos GIC to PMU IRQ mapping
>   * @hwirq: Hardware IRQ signal of the GIC
> @@ -111,7 +114,7 @@ static int exynos_irq_set_wake(struct irq_data *data, unsigned int state)
>   */
>  void exynos_cpu_power_down(int cpu)
>  {
> -	__raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
> +	pmu_raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
>  }
>  
>  /**
> @@ -122,8 +125,8 @@ void exynos_cpu_power_down(int cpu)
>   */
>  void exynos_cpu_power_up(int cpu)
>  {
> -	__raw_writel(S5P_CORE_LOCAL_PWR_EN,
> -		     EXYNOS_ARM_CORE_CONFIGURATION(cpu));
> +	pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN,
> +			EXYNOS_ARM_CORE_CONFIGURATION(cpu));
>  }
>  
>  /**
> @@ -133,7 +136,7 @@ void exynos_cpu_power_up(int cpu)
>   */
>  int exynos_cpu_power_state(int cpu)
>  {
> -	return (__raw_readl(EXYNOS_ARM_CORE_STATUS(cpu)) &
> +	return (__raw_readl(pmu_base_addr + EXYNOS_ARM_CORE_STATUS(cpu)) &
>  			S5P_CORE_LOCAL_PWR_EN);

__raw_readl()s could be replaced with pmu_raw_readl()s too.

Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/