Re: [PATCH 1/1] ARM: dts: zynq: Add Parallella device tree

From: Andreas FÃrber
Date: Mon Jun 30 2014 - 09:25:10 EST


Hi,

+Matteo

Am 30.06.2014 07:15, schrieb Olof Johansson:
> On Sun, Jun 29, 2014 at 1:50 PM, Andreas FÃrber <afaerber@xxxxxxx> wrote:
>> This allows to boot the Adapteva Parallella board to serial console.
>>
>> Cc: Andreas Olofsson <andreas@xxxxxxxxxxxx>
>> Signed-off-by: Andreas FÃrber <afaerber@xxxxxxx>
>
> Nice and clean DTS, just a couple of comments below.
>
>> diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts
>> new file mode 100644
>> index 0000000..98df66c
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/zynq-parallella.dts
>> @@ -0,0 +1,63 @@
>> +/*
>> + * Copyright (c) 2014 SUSE LINUX Products GmbH
>> + *
>> + * Derived from zynq-zed.dts:
>> + *
>> + * Copyright (C) 2011 Xilinx
>> + * Copyright (C) 2012 National Instruments Corp.
>> + * Copyright (C) 2013 Xilinx
>> + *
>> + * This software is licensed under the terms of the GNU General Public
>> + * License version 2, as published by the Free Software Foundation, and
>> + * may be copied, distributed, and modified under those terms.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +/dts-v1/;
>> +/include/ "zynq-7000.dtsi"
>> +
>> +/ {
>> + model = "Parallella Board";
>> + compatible = "xlnx,zynq-7000";
>
> This should have a more specific compatible as the first one. Probably
> something like:
> compatible = "adapteva,parallella", "xlnx,zynq-7000";

Sure, I can add one if desired. As indicated in the file header, I used
zynq-zed.dts as template, which doesn't have its own either:

http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/zynq-zed.dts

Andreas, can I assume you would be okay with me assigning Adapteva, Inc.
the suggested "adapteva" prefix in the below list?

http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/vendor-prefixes.txt

I guess it'll come in handy if we ever document the Epiphany
coprocessor's registers. The physical chip on the board is connected via
some FPGA glue - would that be placed like this?

/ {
amba {
epiphany: epiphany@80000000 {
compatible = "adapteva,epiphany-iii";
reg = <0x80000000 0x40000000>;
};
};
};

It's accessed through /dev/epiphany in a userspace library below,

https://github.com/adapteva/epiphany-libs/blob/master/src/e-hal/src/epiphany-hal.c#L215

https://github.com/adapteva/epiphany-libs/commit/80364e8ee4e99e450a632885a62e7a501398c200

but it's not clear to me who is supposed to create that device. No
downstream kernel driver nor corresponding node in the device tree:

https://github.com/parallella/parallella-linux-adi/blob/d04c39251dc3153b60555642b502dde15f7156a6/arch/arm/boot/dts/zynq-parallella.dts

Ben? Andreas?

Anyway, given that vf610.dtsi only documents the Cortex-A5 core but not
its Cortex-M4 companion core, I'm assuming we should not add the 16 (or
64) Epiphany cores to /cpus node (which would then require to split this
file into zynq-parallella.dtsi and zynq-parallella-{e16,e64}.dts).

>> +
>> + memory {
>> + device_type = "memory";
>> + reg = <0 0x20000000>;

Err, this should be <0 0x40000000> (1 GiB). Copied from zynq-zed.dts,
and downstream has the wrong value, too.

> Does the bootloader update this entry, or is it truly static? If it's
> updated then it's become recent habit to leave the memory size empty
> in the static file.

The board uses a downstream U-Boot, displaying 992 MiB on serial.

andreas@parallella:/proc/device-tree/memory> hexdump -C reg
00000000 00 00 00 00 3e 00 00 00 |....>...|
00000008

That matches 992 * 1024 * 1024. Shall I change to <0 0> then?

Confusing though is that the Epiphany manual says memory at <0x1e000000
0x02000000> is reserved for use by the Epiphany:

http://adapteva.com/docs/epiphany_sdk_ref.pdf section 14.1 page 118

I believe that is rather 0x3e000000, which U-Boot seems to confirm:

https://github.com/parallella/parallella-uboot/blob/3f4794e9ac524be6a373e6ff39ee9ae4529e0f14/include/configs/parallella.h#L25

>> + };
>> +
>> + chosen {
>> + bootargs = "console=ttyPS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
>> + };
>> +};
>
> A bit more torn on this one, I'm OK with it staying in even if
> firmware overrides for all practical purposes since it's good to keep
> around for reference w.r.t. console. Note that we're starting to move
> over to using /chosen/stdout-path, so you might want to add that now
> instead of later.

The board boots U-Boot from flash; U-Boot is configured with no
bootdelay, and users are instructed to deploy one of two provided
devicetree.dtb files, depending on whether they want to run headless
(console=ttyPS0,115200) or with HDMI-enabling FPGA bitstream (no
console=). No bootargs variable is set in U-Boot environment.

U-Boot loads uImage, device tree and bitstream from FAT p1, and device
trees currently hardcode an ext4 p2, so I intentionally left that in
here, for unmodified .dtb deployment for shipping bootloader.

I'll look into /chosen/stdout-path, thanks for the pointer.

Regards,
Andreas

--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 NÃrnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix ImendÃrffer; HRB 16746 AG NÃrnberg
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/