[PATCH 2/3] staging: comedi: addi_apci_1564: fix use of apci1564_reset() to disable DI interrupts
From: Chase Southwood
Date: Sat Jun 28 2014 - 00:50:13 EST
apci1564_cos_insn_config() is currently using apci1564_reset() to disable
digital input interrupts when the configuration operation is
COMEDI_DIGITAL_TRIG_DISABLE. However, this is incorrect as the device reset
function also resets the registers for the digital outputs, timer, watchdog, and
counters as well. Replace the reset function call with a direct disabling of
just the digital input interrupts.
Signed-off-by: Chase Southwood <chase.southwood@xxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/addi_apci_1564.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/addi_apci_1564.c b/drivers/staging/comedi/drivers/addi_apci_1564.c
index 59786e7..0141ed9 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1564.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1564.c
@@ -285,7 +285,10 @@ static int apci1564_cos_insn_config(struct comedi_device *dev,
devpriv->ctrl = 0;
devpriv->mode1 = 0;
devpriv->mode2 = 0;
- apci1564_reset(dev);
+ outl(0x0, devpriv->amcc_iobase + APCI1564_DI_IRQ_REG);
+ inl(devpriv->amcc_iobase + APCI1564_DI_INT_STATUS_REG);
+ outl(0x0, devpriv->amcc_iobase + APCI1564_DI_INT_MODE1_REG);
+ outl(0x0, devpriv->amcc_iobase + APCI1564_DI_INT_MODE2_REG);
break;
case COMEDI_DIGITAL_TRIG_ENABLE_EDGES:
if (devpriv->ctrl != (APCI1564_DI_INT_ENABLE |
--
2.0.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/