[PATCH 3/3] ARM: dts: SAMSUNG: Add aliases of UART nodes

From: Tomasz Figa
Date: Thu Jun 26 2014 - 07:26:22 EST


This patch adds alias entries for UART nodes of all SoCs using
samsung-uart compatible UART controllers, so that the dependency on
probe order is removed and deterministic device naming is assured.

Signed-off-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
---
arch/arm/boot/dts/exynos3250.dtsi | 2 ++
arch/arm/boot/dts/exynos4.dtsi | 12 ++++++++----
arch/arm/boot/dts/exynos5.dtsi | 15 +++++++++++----
arch/arm/boot/dts/exynos5260.dtsi | 4 ++++
arch/arm/boot/dts/exynos5410.dtsi | 6 ++++++
arch/arm/boot/dts/exynos5440.dtsi | 6 ++++--
arch/arm/boot/dts/s3c2416.dtsi | 6 +++++-
arch/arm/boot/dts/s3c24xx.dtsi | 9 ++++++---
arch/arm/boot/dts/s3c64xx.dtsi | 4 ++++
9 files changed, 50 insertions(+), 14 deletions(-)

diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 3e678fa..f4b5411 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -39,6 +39,8 @@
i2c5 = &i2c_5;
i2c6 = &i2c_6;
i2c7 = &i2c_7;
+ serial0 = &serial_0;
+ serial1 = &serial_1;
};

cpus {
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index fbaf426..536d3c3 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -44,6 +44,10 @@
fimc1 = &fimc_1;
fimc2 = &fimc_2;
fimc3 = &fimc_3;
+ serial0 = &serial_0;
+ serial1 = &serial_1;
+ serial2 = &serial_2;
+ serial3 = &serial_3;
};

clock_audss: clock-controller@03810000 {
@@ -363,7 +367,7 @@
status = "disabled";
};

- serial@13800000 {
+ serial_0: serial@13800000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
interrupts = <0 52 0>;
@@ -372,7 +376,7 @@
status = "disabled";
};

- serial@13810000 {
+ serial_1: serial@13810000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13810000 0x100>;
interrupts = <0 53 0>;
@@ -381,7 +385,7 @@
status = "disabled";
};

- serial@13820000 {
+ serial_2: serial@13820000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
interrupts = <0 54 0>;
@@ -390,7 +394,7 @@
status = "disabled";
};

- serial@13830000 {
+ serial_3: serial@13830000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13830000 0x100>;
interrupts = <0 55 0>;
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 79d0608..ff2d2cb 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -18,6 +18,13 @@
/ {
interrupt-parent = <&gic>;

+ aliases {
+ serial0 = &serial_0;
+ serial1 = &serial_1;
+ serial2 = &serial_2;
+ serial3 = &serial_3;
+ };
+
chipid@10000000 {
compatible = "samsung,exynos4210-chipid";
reg = <0x10000000 0x100>;
@@ -50,25 +57,25 @@
interrupts = <1 9 0xf04>;
};

- serial@12C00000 {
+ serial_0: serial@12C00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
interrupts = <0 51 0>;
};

- serial@12C10000 {
+ serial_1: serial@12C10000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C10000 0x100>;
interrupts = <0 52 0>;
};

- serial@12C20000 {
+ serial_2: serial@12C20000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C20000 0x100>;
interrupts = <0 53 0>;
};

- serial@12C30000 {
+ serial_3: serial@12C30000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C30000 0x100>;
interrupts = <0 54 0>;
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index 5398a60..4539a0a 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -21,6 +21,10 @@
pinctrl0 = &pinctrl_0;
pinctrl1 = &pinctrl_1;
pinctrl2 = &pinctrl_2;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
};

cpus {
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 3839c26..52070e5 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -20,6 +20,12 @@
compatible = "samsung,exynos5410", "samsung,exynos5";
interrupt-parent = <&gic>;

+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index ae3a17c..8f3373c 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -18,6 +18,8 @@
interrupt-parent = <&gic>;

aliases {
+ serial0 = &serial_0;
+ serial1 = &serial_1;
spi0 = &spi_0;
tmuctrl0 = &tmuctrl_0;
tmuctrl1 = &tmuctrl_1;
@@ -102,7 +104,7 @@
>;
};

- serial@B0000 {
+ serial_0: serial@B0000 {
compatible = "samsung,exynos4210-uart";
reg = <0xB0000 0x1000>;
interrupts = <0 2 0>;
@@ -110,7 +112,7 @@
clock-names = "uart", "clk_uart_baud0";
};

- serial@C0000 {
+ serial_1: serial@C0000 {
compatible = "samsung,exynos4210-uart";
reg = <0xC0000 0x1000>;
interrupts = <0 3 0>;
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
index 955e4a4..30b8f7e 100644
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ b/arch/arm/boot/dts/s3c2416.dtsi
@@ -16,6 +16,10 @@
model = "Samsung S3C2416 SoC";
compatible = "samsung,s3c2416";

+ aliases {
+ serial3 = &uart3;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -68,7 +72,7 @@
<&clocks SCLK_UART>;
};

- serial@5000C000 {
+ uart3: serial@5000C000 {
compatible = "samsung,s3c2440-uart";
reg = <0x5000C000 0x4000>;
interrupts = <1 18 24 4>, <1 18 25 4>;
diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi
index 2d1d7dc..5ed43b8 100644
--- a/arch/arm/boot/dts/s3c24xx.dtsi
+++ b/arch/arm/boot/dts/s3c24xx.dtsi
@@ -16,6 +16,9 @@

aliases {
pinctrl0 = &pinctrl_0;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
};

intc:interrupt-controller@4a000000 {
@@ -46,21 +49,21 @@
#pwm-cells = <4>;
};

- serial@50000000 {
+ uart0: serial@50000000 {
compatible = "samsung,s3c2410-uart";
reg = <0x50000000 0x4000>;
interrupts = <1 28 0 4>, <1 28 1 4>;
status = "disabled";
};

- serial@50004000 {
+ uart1: serial@50004000 {
compatible = "samsung,s3c2410-uart";
reg = <0x50004000 0x4000>;
interrupts = <1 23 3 4>, <1 23 4 4>;
status = "disabled";
};

- serial@50008000 {
+ uart2: serial@50008000 {
compatible = "samsung,s3c2410-uart";
reg = <0x50008000 0x4000>;
interrupts = <1 15 6 4>, <1 15 7 4>;
diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi
index 4e3be4d..ff5bdaa 100644
--- a/arch/arm/boot/dts/s3c64xx.dtsi
+++ b/arch/arm/boot/dts/s3c64xx.dtsi
@@ -23,6 +23,10 @@
aliases {
i2c0 = &i2c0;
pinctrl0 = &pinctrl0;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
};

cpus {
--
1.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/