Re: blk-mq: bitmap tag: performance degradation?
From: Ming Lei
Date: Thu Jun 05 2014 - 22:36:07 EST
On Fri, Jun 6, 2014 at 9:55 AM, Jens Axboe <axboe@xxxxxxxxx> wrote:
> On 2014-06-05 17:33, Ming Lei wrote:
>>
>> On Fri, Jun 6, 2014 at 1:17 AM, Jens Axboe <axboe@xxxxxxxxx> wrote:
>>>
>>> On 06/05/2014 08:16 AM, Ming Lei wrote:
>>>>
>>>> On Thu, Jun 5, 2014 at 10:03 PM, Jens Axboe <axboe@xxxxxxxxx> wrote:
>>>>>
>>>>> On 2014-06-05 08:01, Alexander Gordeev wrote:
>>>>>>
>>>>>>
>>>>>> On Wed, Jun 04, 2014 at 08:18:42AM -0600, Jens Axboe wrote:
>>>>>>>
>>>>>>>
>>>>>>> A null_blk test is the absolute best case for percpu_ida, since
>>>>>>> there are enough tags and everything is localized. The above test is
>>>>>>> more useful for testing blk-mq than any real world application of
>>>>>>> the tagging.
>>>>>>>
>>>>>>> I've done considerable testing on both 2 and 4 socket (32 and 64
>>>>>>> CPUs) and bitmap tagging is better in a much wider range of
>>>>>>> applications. This includes even high tag depth devices like nvme,
>>>>>>> and more normal ranges like mtip32xx and scsi-mq setups.
>>>>>>
>>>>>>
>>>>>>
>>>>>> Just for the record: bitmap tags on a 48 CPU box with NVMe device
>>>>>> indeed shows almost the same performance/cache rate as the stock
>>>>>> kernel.
>>>>>
>>>>>
>>>>>
>>>>> Thanks for confirming. It's one of the dangers of null_blk, it's not
>>>>> always
>>>>> a very accurate simulation of what a real device will do. I think it's
>>>>> mostly a completion side thing, would be great with a small device that
>>>>> supported msi-x and could be used as an irq trigger :-)
>>>>
>>>>
>>>> Maybe null_blk at IRQ_TIMER mode is more close to
>>>> a real device, and I guess the result may be different with
>>>> mode IRQ_NONE/IRQ_SOFTIRQ.
>>>
>>>
>>> It'd be closer in behavior, but the results might then be skewed by
>>> hitting the timer way too hard. And it'd be a general slowdown, again
>>> possibly skewing it. But I haven't tried with the timer completion, to
>>> see if that yields more accurate modelling for this test, so it might
>>> actually be a lot better.
>>
>>
>> My test on a 16core VM(host: 2 sockets, 16core):
>>
>> 1, bitmap tag allocation(3.15-rc7-next):
>> - softirq mode: 759K IOPS
>> - timer mode: 409K IOPS
>>
>> 2, percpu_ida allocation(3.15-rc7)
>> - softirq mode: 1116K IOPS
>> - timer mode: 411K IOPS
>
>
> It's hard to say if this is close, or whether we are just timer bound at
> that point.
You are right, my previous test should be timer bound, but it
should be eased by increasing timer period.
I do the test again with increasing parameter of completion_nsec
to 235000 from default 10000:
1, nullblk(timer mode)3.15-rc7:
- each fio cpu utilization: 80% ~ 90%
- 860K IOPS
2, nullbk(timer mode)3.15-rc7-next
- each fio cpu utilization: 70~80%
- 940K IOPS
Then bitmap based allocation can be observed to be a bit
better than percpu ida.
Thanks,
--
Ming Lei
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/