Re: [PATCH v5 4/5] ARM: tegra: Add efuse and apbmisc bindings

From: Stephen Warren
Date: Thu May 29 2014 - 15:13:45 EST


On 05/28/2014 06:54 AM, Peter De Schrijver wrote:
> Add efuse and apbmisc bindings for Tegra20, Tegra30, Tegra114 and Tegra124.
>
> Signed-off-by: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
> ---
> .../devicetree/bindings/fuse/fuse-tegra.txt | 30 ++++++++++++++++++++
> .../devicetree/bindings/misc/nvidia,apbmisc.txt | 13 ++++++++

Please name these files according to the compatible value, like all the
other Tegra bindings. So, nvidia,tegra20-efuse.txt and
nvidia,tegra20-apbmisc.txt.

> arch/arm/boot/dts/tegra114.dtsi | 12 ++++++++
> arch/arm/boot/dts/tegra124.dtsi | 12 ++++++++
> arch/arm/boot/dts/tegra20.dtsi | 12 ++++++++
> arch/arm/boot/dts/tegra30.dtsi | 12 ++++++++

It's a bit odd to mix in the .dtsi changes in the same patch as the
binding doc.

> diff --git a/Documentation/devicetree/bindings/fuse/fuse-tegra.txt b/Documentation/devicetree/bindings/fuse/fuse-tegra.txt

> +- compatible : should be:
> + "nvidia,tegra20-efuse"
> + "nvidia,tegra30-efuse"
> + "nvidia,tegra114-efuse"
> + "nvidia,tegra124-efuse"
> + Details:
> + nvidia,tegra20-efuse: Tegra20 requires using APB DMA to read the fuse data
> + due to a hardware bug. Tegra20 also lacks certain information which is
> + available in later generations such as fab code, lot code, wafer id,..
> + nvidia,tegra30-efuse, nvidia,tegra114-efuse and nvidia,tegra124-efuse:
> + The differences between these SoCs are the size of the efuse array,
> + the location of the spare (OEM programmable) bits and the location of
> + the speedo data.

I suppose it doesn't hurt, but I don't think we need any of the
"Details" section here.

> +- clocks: Should contain a pointer to the fuse clock.

Please require clock-names so we don't need a mix of index-/name-based
lookups in the future. Please follow the same wording as existing Tegra
binding docs that use clocks. For example:

- clocks : Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
- d_audio
- apbif

Are there no PMC reset signals fed into the fuse block?

> diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi

> + apbmisc@0x70000800 {

The unit address in the DT nod name should not contain "0x". Same for
other .dtsi files.

> diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi

> + apbmisc@0x70000800 {

Tegra124 uses #address-cells=<2>, so the unit address in the node name
needs to follow that. Hence, apbmisc@0,70000800.

> diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi

> @@ -236,6 +236,12 @@
> interrupt-controller;
> };
>
> + apbmisc@0x70000800 {
> + compatible = "nvidia,tegra20-apbmisc";

Indentation looks odd here. Mix of TABs/spaces perhaps?

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/