Re: [PATCH v4 1/5] devicetree: bindings: document Broadcom CPU enable method

From: Lorenzo Pieralisi
Date: Wed May 28 2014 - 09:34:39 EST


On Wed, May 28, 2014 at 01:22:06PM +0100, Alex Elder wrote:
> On 05/28/2014 05:36 AM, Lorenzo Pieralisi wrote:
> > On Wed, May 28, 2014 at 04:30:47AM +0100, Alex Elder wrote:
> >> On 05/27/2014 06:49 AM, Lorenzo Pieralisi wrote:
> >>> On Tue, May 20, 2014 at 06:43:46PM +0100, Alex Elder wrote:
> >>>> Broadcom mobile SoCs use a ROM-implemented holding pen for
> >>>> controlled boot of secondary cores. A special register is
> >>>> used to communicate to the ROM that a secondary core should
> >>>> start executing kernel code. This enable method is currently
> >>>> used for members of the bcm281xx and bcm21664 SoC families.
> >>>>
> >>>> The use of an enable method also allows the SMP operation vector to
> >>>> be assigned as a result of device tree content for these SoCs.
> >>>>
> >>>> Signed-off-by: Alex Elder <elder@xxxxxxxxxx>
> >>>
> >>> This is getting out of control, it is absolutely ghastly. I wonder how
> >>> I can manage to keep cpus.txt updated if anyone with a boot method
> >>> du jour adds into cpus.txt, and honestly in this specific case it is even
> >>> hard to understand why.
> >>
> >> OK, in this message I'll focus on the particulars of this
> >> proposed binding.
> >>
> >>> Can't it be done with bindings for the relative register address space
> >>> (regmap ?) and platform code just calls the registers driver to set-up the
> >>> jump address ? It is platform specific code anyway there is no way you
> >>> can make this generic.
> >>
> >> I want to clarify what you're after here.
> >>
> >> My aim is to add SMP support for a class of Broadcom SMP
> >> machines. To do so, I'm told I need to use the technique
> >> of assigning the SMP operations vector as a result of
> >> identifying an enable method in the DT.
> >>
> >> For 32-bit ARM, there are no generic "enable-method" values.
> >> (I did attempt to create one for "spin-table" but that was
> >> rejected by Russell King.) For the machines I'm trying to
> >> enable, secondary CPUS start out spinning in a ROM-based
> >> holding pen, and there is no need for a kernel-based one.
> >>
> >> However, like a spin-table/holding pen enable method, a
> >> memory location is required for coordination between the
> >> boot CPU running kernel code and secondary CPUs running ROM
> >> code. My proposal specifies it using a special numeric
> >> property value named "secondary-boot-reg" in the "cpus"
> >> node in the DT.
> >>
> >> And as I understand it, the issue you have relates to how
> >> this memory location is specified.
> >
> > The issue I have relates to cluttering cpus.txt with all
> > sorts of platform specific SMP boot hacks.
>
> OK, as I mentioned in my other message, I totally
> agree with you here. It's a total (and building)
> mess. I discussed this with Mark Rutland at ELC
> last month and suggested splitting that stuff out
> of "cpus.txt", which I have now proposed with a
> patch.
> https://lkml.org/lkml/2014/5/8/545

I think this makes sense, I will review that patchset, and with this
approach agreed I am ok with adding a platform specific boot method,
since it is split up "nicely", do not bother adding a specific driver
to poke a register (it will be fun to see the number of files we have
to add to /cpu-enable-method though, big fun).

I still think that it is high time we started pushing back on these
platform hacks and move towards a common interface like PSCI to boot
(and suspend) ARM processors, there is no reason whatsoever why this
can't be done on the platforms you are trying to get merged unless I am
missing something.

Lorenzo

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/