[PATCH] ARM: STi: DT: STiH41x: Convert all uppercase non-defines to lowercase
From: Lee Jones
Date: Tue May 27 2014 - 08:53:49 EST
Suggested-by: Olof Johansson <olof@xxxxxxxxx>
Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
arch/arm/boot/dts/stih415-pinctrl.dtsi | 340 +++++++++++++++---------------
arch/arm/boot/dts/stih416-b2020-revE.dts | 6 +-
arch/arm/boot/dts/stih416-pinctrl.dtsi | 342 +++++++++++++++----------------
arch/arm/boot/dts/stih41x-b2000.dtsi | 6 +-
arch/arm/boot/dts/stih41x-b2020.dtsi | 6 +-
5 files changed, 350 insertions(+), 350 deletions(-)
diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi
index caeac7e..1e0255d 100644
--- a/arch/arm/boot/dts/stih415-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi
@@ -11,33 +11,33 @@
/ {
aliases {
- gpio0 = &PIO0;
- gpio1 = &PIO1;
- gpio2 = &PIO2;
- gpio3 = &PIO3;
- gpio4 = &PIO4;
- gpio5 = &PIO5;
- gpio6 = &PIO6;
- gpio7 = &PIO7;
- gpio8 = &PIO8;
- gpio9 = &PIO9;
- gpio10 = &PIO10;
- gpio11 = &PIO11;
- gpio12 = &PIO12;
- gpio13 = &PIO13;
- gpio14 = &PIO14;
- gpio15 = &PIO15;
- gpio16 = &PIO16;
- gpio17 = &PIO17;
- gpio18 = &PIO18;
- gpio19 = &PIO100;
- gpio20 = &PIO101;
- gpio21 = &PIO102;
- gpio22 = &PIO103;
- gpio23 = &PIO104;
- gpio24 = &PIO105;
- gpio25 = &PIO106;
- gpio26 = &PIO107;
+ gpio0 = &pio0;
+ gpio1 = &pio1;
+ gpio2 = &pio2;
+ gpio3 = &pio3;
+ gpio4 = &pio4;
+ gpio5 = &pio5;
+ gpio6 = &pio6;
+ gpio7 = &pio7;
+ gpio8 = &pio8;
+ gpio9 = &pio9;
+ gpio10 = &pio10;
+ gpio11 = &pio11;
+ gpio12 = &pio12;
+ gpio13 = &pio13;
+ gpio14 = &pio14;
+ gpio15 = &pio15;
+ gpio16 = &pio16;
+ gpio17 = &pio17;
+ gpio18 = &pio18;
+ gpio19 = &pio100;
+ gpio20 = &pio101;
+ gpio21 = &pio102;
+ gpio22 = &pio103;
+ gpio23 = &pio104;
+ gpio24 = &pio105;
+ gpio25 = &pio106;
+ gpio26 = &pio107;
};
soc {
@@ -52,7 +52,7 @@
interrupts-names = "irqmux";
ranges = <0 0xfe610000 0x5000>;
- PIO0: gpio@fe610000 {
+ pio0: gpio@fe610000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -60,7 +60,7 @@
reg = <0 0x100>;
st,bank-name = "PIO0";
};
- PIO1: gpio@fe611000 {
+ pio1: gpio@fe611000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -68,7 +68,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO1";
};
- PIO2: gpio@fe612000 {
+ pio2: gpio@fe612000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -76,7 +76,7 @@
reg = <0x2000 0x100>;
st,bank-name = "PIO2";
};
- PIO3: gpio@fe613000 {
+ pio3: gpio@fe613000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -84,7 +84,7 @@
reg = <0x3000 0x100>;
st,bank-name = "PIO3";
};
- PIO4: gpio@fe614000 {
+ pio4: gpio@fe614000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -96,8 +96,8 @@
sbc_serial1 {
pinctrl_sbc_serial1:sbc_serial1 {
st,pins {
- tx = <&PIO2 6 ALT3 OUT>;
- rx = <&PIO2 7 ALT3 IN>;
+ tx = <&pio2 6 ALT3 OUT>;
+ rx = <&pio2 7 ALT3 IN>;
};
};
};
@@ -105,15 +105,15 @@
keyscan {
pinctrl_keyscan: keyscan {
st,pins {
- keyin0 = <&PIO0 2 ALT2 IN>;
- keyin1 = <&PIO0 3 ALT2 IN>;
- keyin2 = <&PIO0 4 ALT2 IN>;
- keyin3 = <&PIO2 6 ALT2 IN>;
-
- keyout0 = <&PIO1 6 ALT2 OUT>;
- keyout1 = <&PIO1 7 ALT2 OUT>;
- keyout2 = <&PIO0 6 ALT2 OUT>;
- keyout3 = <&PIO2 7 ALT2 OUT>;
+ keyin0 = <&pio0 2 ALT2 IN>;
+ keyin1 = <&pio0 3 ALT2 IN>;
+ keyin2 = <&pio0 4 ALT2 IN>;
+ keyin3 = <&pio2 6 ALT2 IN>;
+
+ keyout0 = <&pio1 6 ALT2 OUT>;
+ keyout1 = <&pio1 7 ALT2 OUT>;
+ keyout2 = <&pio0 6 ALT2 OUT>;
+ keyout3 = <&pio2 7 ALT2 OUT>;
};
};
};
@@ -121,8 +121,8 @@
sbc_i2c0 {
pinctrl_sbc_i2c0_default: sbc_i2c0-default {
st,pins {
- sda = <&PIO4 6 ALT1 BIDIR>;
- scl = <&PIO4 5 ALT1 BIDIR>;
+ sda = <&pio4 6 ALT1 BIDIR>;
+ scl = <&pio4 5 ALT1 BIDIR>;
};
};
};
@@ -130,8 +130,8 @@
sbc_i2c1 {
pinctrl_sbc_i2c1_default: sbc_i2c1-default {
st,pins {
- sda = <&PIO3 2 ALT2 BIDIR>;
- scl = <&PIO3 1 ALT2 BIDIR>;
+ sda = <&pio3 2 ALT2 BIDIR>;
+ scl = <&pio3 1 ALT2 BIDIR>;
};
};
};
@@ -139,7 +139,7 @@
rc{
pinctrl_ir: ir0 {
st,pins {
- ir = <&PIO4 0 ALT2 IN>;
+ ir = <&pio4 0 ALT2 IN>;
};
};
};
@@ -147,49 +147,49 @@
gmac1 {
pinctrl_mii1: mii1 {
st,pins {
- txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
- col = <&PIO0 7 ALT1 IN BYPASS 1000>;
- mdio = <&PIO1 0 ALT1 OUT BYPASS 0>;
- mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
- crs = <&PIO1 2 ALT1 IN BYPASS 1000>;
- mdint = <&PIO1 3 ALT1 IN BYPASS 0>;
- rxd0 = <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxd1 = <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxd2 = <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxd3 = <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxdv = <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
- phyclk = <&PIO2 3 ALT1 IN NICLK 1000 CLK_A>;
+ txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+ col = <&pio0 7 ALT1 IN BYPASS 1000>;
+ mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+ mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+ crs = <&pio1 2 ALT1 IN BYPASS 1000>;
+ mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+ rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&pio2 3 ALT1 IN NICLK 1000 CLK_A>;
};
};
pinctrl_rgmii1: rgmii1-0 {
st,pins {
- txd0 = <&PIO0 0 ALT1 OUT DE_IO 1000 CLK_A>;
- txd1 = <&PIO0 1 ALT1 OUT DE_IO 1000 CLK_A>;
- txd2 = <&PIO0 2 ALT1 OUT DE_IO 1000 CLK_A>;
- txd3 = <&PIO0 3 ALT1 OUT DE_IO 1000 CLK_A>;
- txen = <&PIO0 5 ALT1 OUT DE_IO 0 CLK_A>;
- txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
- mdio = <&PIO1 0 ALT1 OUT BYPASS 0>;
- mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
- rxd0 = <&PIO1 4 ALT1 IN DE_IO 0 CLK_A>;
- rxd1 = <&PIO1 5 ALT1 IN DE_IO 0 CLK_A>;
- rxd2 = <&PIO1 6 ALT1 IN DE_IO 0 CLK_A>;
- rxd3 = <&PIO1 7 ALT1 IN DE_IO 0 CLK_A>;
-
- rxdv = <&PIO2 0 ALT1 IN DE_IO 500 CLK_A>;
- rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
- phyclk = <&PIO2 3 ALT4 OUT NICLK 0 CLK_B>;
-
- clk125= <&PIO3 7 ALT4 IN NICLK 0 CLK_A>;
+ txd0 = <&pio0 0 ALT1 OUT DE_IO 1000 CLK_A>;
+ txd1 = <&pio0 1 ALT1 OUT DE_IO 1000 CLK_A>;
+ txd2 = <&pio0 2 ALT1 OUT DE_IO 1000 CLK_A>;
+ txd3 = <&pio0 3 ALT1 OUT DE_IO 1000 CLK_A>;
+ txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>;
+ txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+ mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+ mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+ rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>;
+ rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>;
+ rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>;
+ rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>;
+
+ rxdv = <&pio2 0 ALT1 IN DE_IO 500 CLK_A>;
+ rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&pio2 3 ALT4 OUT NICLK 0 CLK_B>;
+
+ clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
};
};
};
@@ -206,7 +206,7 @@
interrupts-names = "irqmux";
ranges = <0 0xfee00000 0x8000>;
- PIO5: gpio@fee00000 {
+ pio5: gpio@fee00000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -214,7 +214,7 @@
reg = <0 0x100>;
st,bank-name = "PIO5";
};
- PIO6: gpio@fee01000 {
+ pio6: gpio@fee01000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -222,7 +222,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO6";
};
- PIO7: gpio@fee02000 {
+ pio7: gpio@fee02000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -230,7 +230,7 @@
reg = <0x2000 0x100>;
st,bank-name = "PIO7";
};
- PIO8: gpio@fee03000 {
+ pio8: gpio@fee03000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -238,7 +238,7 @@
reg = <0x3000 0x100>;
st,bank-name = "PIO8";
};
- PIO9: gpio@fee04000 {
+ pio9: gpio@fee04000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -246,7 +246,7 @@
reg = <0x4000 0x100>;
st,bank-name = "PIO9";
};
- PIO10: gpio@fee05000 {
+ pio10: gpio@fee05000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -254,7 +254,7 @@
reg = <0x5000 0x100>;
st,bank-name = "PIO10";
};
- PIO11: gpio@fee06000 {
+ pio11: gpio@fee06000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -262,7 +262,7 @@
reg = <0x6000 0x100>;
st,bank-name = "PIO11";
};
- PIO12: gpio@fee07000 {
+ pio12: gpio@fee07000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -274,8 +274,8 @@
i2c0 {
pinctrl_i2c0_default: i2c0-default {
st,pins {
- sda = <&PIO9 3 ALT1 BIDIR>;
- scl = <&PIO9 2 ALT1 BIDIR>;
+ sda = <&pio9 3 ALT1 BIDIR>;
+ scl = <&pio9 2 ALT1 BIDIR>;
};
};
};
@@ -283,8 +283,8 @@
i2c1 {
pinctrl_i2c1_default: i2c1-default {
st,pins {
- sda = <&PIO12 1 ALT1 BIDIR>;
- scl = <&PIO12 0 ALT1 BIDIR>;
+ sda = <&pio12 1 ALT1 BIDIR>;
+ scl = <&pio12 0 ALT1 BIDIR>;
};
};
};
@@ -301,7 +301,7 @@
interrupts-names = "irqmux";
ranges = <0 0xfe820000 0x8000>;
- PIO13: gpio@fe820000 {
+ pio13: gpio@fe820000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -309,7 +309,7 @@
reg = <0 0x100>;
st,bank-name = "PIO13";
};
- PIO14: gpio@fe821000 {
+ pio14: gpio@fe821000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -317,7 +317,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO14";
};
- PIO15: gpio@fe822000 {
+ pio15: gpio@fe822000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -325,7 +325,7 @@
reg = <0x2000 0x100>;
st,bank-name = "PIO15";
};
- PIO16: gpio@fe823000 {
+ pio16: gpio@fe823000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -333,7 +333,7 @@
reg = <0x3000 0x100>;
st,bank-name = "PIO16";
};
- PIO17: gpio@fe824000 {
+ pio17: gpio@fe824000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -341,7 +341,7 @@
reg = <0x4000 0x100>;
st,bank-name = "PIO17";
};
- PIO18: gpio@fe825000 {
+ pio18: gpio@fe825000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -353,8 +353,8 @@
serial2 {
pinctrl_serial2: serial2-0 {
st,pins {
- tx = <&PIO17 4 ALT2 OUT>;
- rx = <&PIO17 5 ALT2 IN>;
+ tx = <&pio17 4 ALT2 OUT>;
+ rx = <&pio17 5 ALT2 IN>;
};
};
};
@@ -362,68 +362,68 @@
gmac0{
pinctrl_mii0: mii0 {
st,pins {
- mdint = <&PIO13 6 ALT2 IN BYPASS 0>;
- txen = <&PIO13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-
- txd0 = <&PIO14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- txd1 = <&PIO14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- txd2 = <&PIO14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
- txd3 = <&PIO14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
-
- txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
- txer = <&PIO15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- crs = <&PIO15 2 ALT2 IN BYPASS 1000>;
- col = <&PIO15 3 ALT2 IN BYPASS 1000>;
- mdio = <&PIO15 4 ALT2 OUT BYPASS 3000>;
- mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
-
- rxd0 = <&PIO16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxd1 = <&PIO16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxd2 = <&PIO16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxd3 = <&PIO16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxdv = <&PIO15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
- phyclk = <&PIO13 5 ALT2 OUT NICLK 1000 CLK_A>;
+ mdint = <&pio13 6 ALT2 IN BYPASS 0>;
+ txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+
+ txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+ txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+
+ txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
+ txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ crs = <&pio15 2 ALT2 IN BYPASS 1000>;
+ col = <&pio15 3 ALT2 IN BYPASS 1000>;
+ mdio = <&pio15 4 ALT2 OUT BYPASS 3000>;
+ mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
+
+ rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>;
+ phyclk = <&pio13 5 ALT2 OUT NICLK 1000 CLK_A>;
};
};
pinctrl_gmii0: gmii0 {
st,pins {
- mdint = <&PIO13 6 ALT2 IN BYPASS 0>;
- mdio = <&PIO15 4 ALT2 OUT BYPASS 3000>;
- mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
- txen = <&PIO13 7 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
-
- txd0 = <&PIO14 0 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
- txd1 = <&PIO14 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
- txd2 = <&PIO14 2 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
- txd3 = <&PIO14 3 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
- txd4 = <&PIO14 4 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
- txd5 = <&PIO14 5 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
- txd6 = <&PIO14 6 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
- txd7 = <&PIO14 7 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
-
- txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
- txer = <&PIO15 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
- crs = <&PIO15 2 ALT2 IN BYPASS 1000>;
- col = <&PIO15 3 ALT2 IN BYPASS 1000>;
- rxdv = <&PIO15 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
-
- rxd0 = <&PIO16 0 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rxd1 = <&PIO16 1 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rxd2 = <&PIO16 2 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rxd3 = <&PIO16 3 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rxd4 = <&PIO16 4 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rxd5 = <&PIO16 5 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rxd6 = <&PIO16 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rxd7 = <&PIO16 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
-
- rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
- clk125 = <&PIO17 6 ALT1 IN NICLK 0 CLK_A>;
- phyclk = <&PIO13 5 ALT4 OUT NICLK 0 CLK_B>;
+ mdint = <&pio13 6 ALT2 IN BYPASS 0>;
+ mdio = <&pio15 4 ALT2 OUT BYPASS 3000>;
+ mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
+ txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
+
+ txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
+ txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
+ txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
+ txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
+ txd4 = <&pio14 4 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
+ txd5 = <&pio14 5 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
+ txd6 = <&pio14 6 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
+ txd7 = <&pio14 7 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
+
+ txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
+ txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
+ crs = <&pio15 2 ALT2 IN BYPASS 1000>;
+ col = <&pio15 3 ALT2 IN BYPASS 1000>;
+ rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+
+ rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd4 = <&pio16 4 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd5 = <&pio16 5 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd6 = <&pio16 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd7 = <&pio16 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+
+ rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>;
+ clk125 = <&pio17 6 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&pio13 5 ALT4 OUT NICLK 0 CLK_B>;
};
@@ -442,7 +442,7 @@
interrupts-names = "irqmux";
ranges = <0 0xfd6b0000 0x3000>;
- PIO100: gpio@fd6b0000 {
+ pio100: gpio@fd6b0000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -450,7 +450,7 @@
reg = <0 0x100>;
st,bank-name = "PIO100";
};
- PIO101: gpio@fd6b1000 {
+ pio101: gpio@fd6b1000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -458,7 +458,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO101";
};
- PIO102: gpio@fd6b2000 {
+ pio102: gpio@fd6b2000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -479,7 +479,7 @@
interrupts-names = "irqmux";
ranges = <0 0xfd330000 0x5000>;
- PIO103: gpio@fd330000 {
+ pio103: gpio@fd330000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -487,7 +487,7 @@
reg = <0 0x100>;
st,bank-name = "PIO103";
};
- PIO104: gpio@fd331000 {
+ pio104: gpio@fd331000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -495,7 +495,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO104";
};
- PIO105: gpio@fd332000 {
+ pio105: gpio@fd332000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -503,7 +503,7 @@
reg = <0x2000 0x100>;
st,bank-name = "PIO105";
};
- PIO106: gpio@fd333000 {
+ pio106: gpio@fd333000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -511,7 +511,7 @@
reg = <0x3000 0x100>;
st,bank-name = "PIO106";
};
- PIO107: gpio@fd334000 {
+ pio107: gpio@fd334000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020-revE.dts
index ba0fa2c..d72e5c7 100644
--- a/arch/arm/boot/dts/stih416-b2020-revE.dts
+++ b/arch/arm/boot/dts/stih416-b2020-revE.dts
@@ -19,17 +19,17 @@
red {
#gpio-cells = <1>;
label = "Front Panel LED";
- gpios = <&PIO4 1>;
+ gpios = <&pio4 1>;
linux,default-trigger = "heartbeat";
};
green {
- gpios = <&PIO1 3>;
+ gpios = <&pio1 3>;
default-state = "off";
};
};
ethernet1: dwmac@fef08000 {
- snps,reset-gpio = <&PIO0 7>;
+ snps,reset-gpio = <&pio0 7>;
};
};
};
diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi
index 6252188..3e06d7f 100644
--- a/arch/arm/boot/dts/stih416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi
@@ -12,36 +12,36 @@
/ {
aliases {
- gpio0 = &PIO0;
- gpio1 = &PIO1;
- gpio2 = &PIO2;
- gpio3 = &PIO3;
- gpio4 = &PIO4;
- gpio5 = &PIO40;
- gpio6 = &PIO5;
- gpio7 = &PIO6;
- gpio8 = &PIO7;
- gpio9 = &PIO8;
- gpio10 = &PIO9;
- gpio11 = &PIO10;
- gpio12 = &PIO11;
- gpio13 = &PIO12;
- gpio14 = &PIO30;
- gpio15 = &PIO31;
- gpio16 = &PIO13;
- gpio17 = &PIO14;
- gpio18 = &PIO15;
- gpio19 = &PIO16;
- gpio20 = &PIO17;
- gpio21 = &PIO18;
- gpio22 = &PIO100;
- gpio23 = &PIO101;
- gpio24 = &PIO102;
- gpio25 = &PIO103;
- gpio26 = &PIO104;
- gpio27 = &PIO105;
- gpio28 = &PIO106;
- gpio29 = &PIO107;
+ gpio0 = &pio0;
+ gpio1 = &pio1;
+ gpio2 = &pio2;
+ gpio3 = &pio3;
+ gpio4 = &pio4;
+ gpio5 = &pio40;
+ gpio6 = &pio5;
+ gpio7 = &pio6;
+ gpio8 = &pio7;
+ gpio9 = &pio8;
+ gpio10 = &pio9;
+ gpio11 = &pio10;
+ gpio12 = &pio11;
+ gpio13 = &pio12;
+ gpio14 = &pio30;
+ gpio15 = &pio31;
+ gpio16 = &pio13;
+ gpio17 = &pio14;
+ gpio18 = &pio15;
+ gpio19 = &pio16;
+ gpio20 = &pio17;
+ gpio21 = &pio18;
+ gpio22 = &pio100;
+ gpio23 = &pio101;
+ gpio24 = &pio102;
+ gpio25 = &pio103;
+ gpio26 = &pio104;
+ gpio27 = &pio105;
+ gpio28 = &pio106;
+ gpio29 = &pio107;
};
soc {
@@ -56,7 +56,7 @@
interrupts-names = "irqmux";
ranges = <0 0xfe610000 0x6000>;
- PIO0: gpio@fe610000 {
+ pio0: gpio@fe610000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -64,7 +64,7 @@
reg = <0 0x100>;
st,bank-name = "PIO0";
};
- PIO1: gpio@fe611000 {
+ pio1: gpio@fe611000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -72,7 +72,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO1";
};
- PIO2: gpio@fe612000 {
+ pio2: gpio@fe612000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -80,7 +80,7 @@
reg = <0x2000 0x100>;
st,bank-name = "PIO2";
};
- PIO3: gpio@fe613000 {
+ pio3: gpio@fe613000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -88,7 +88,7 @@
reg = <0x3000 0x100>;
st,bank-name = "PIO3";
};
- PIO4: gpio@fe614000 {
+ pio4: gpio@fe614000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -96,7 +96,7 @@
reg = <0x4000 0x100>;
st,bank-name = "PIO4";
};
- PIO40: gpio@fe615000 {
+ pio40: gpio@fe615000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -109,15 +109,15 @@
rc{
pinctrl_ir: ir0 {
st,pins {
- ir = <&PIO4 0 ALT2 IN>;
+ ir = <&pio4 0 ALT2 IN>;
};
};
};
sbc_serial1 {
pinctrl_sbc_serial1: sbc_serial1 {
st,pins {
- tx = <&PIO2 6 ALT3 OUT>;
- rx = <&PIO2 7 ALT3 IN>;
+ tx = <&pio2 6 ALT3 OUT>;
+ rx = <&pio2 7 ALT3 IN>;
};
};
};
@@ -125,15 +125,15 @@
keyscan {
pinctrl_keyscan: keyscan {
st,pins {
- keyin0 = <&PIO0 2 ALT2 IN>;
- keyin1 = <&PIO0 3 ALT2 IN>;
- keyin2 = <&PIO0 4 ALT2 IN>;
- keyin3 = <&PIO2 6 ALT2 IN>;
-
- keyout0 = <&PIO1 6 ALT2 OUT>;
- keyout1 = <&PIO1 7 ALT2 OUT>;
- keyout2 = <&PIO0 6 ALT2 OUT>;
- keyout3 = <&PIO2 7 ALT2 OUT>;
+ keyin0 = <&pio0 2 ALT2 IN>;
+ keyin1 = <&pio0 3 ALT2 IN>;
+ keyin2 = <&pio0 4 ALT2 IN>;
+ keyin3 = <&pio2 6 ALT2 IN>;
+
+ keyout0 = <&pio1 6 ALT2 OUT>;
+ keyout1 = <&pio1 7 ALT2 OUT>;
+ keyout2 = <&pio0 6 ALT2 OUT>;
+ keyout3 = <&pio2 7 ALT2 OUT>;
};
};
};
@@ -141,8 +141,8 @@
sbc_i2c0 {
pinctrl_sbc_i2c0_default: sbc_i2c0-default {
st,pins {
- sda = <&PIO4 6 ALT1 BIDIR>;
- scl = <&PIO4 5 ALT1 BIDIR>;
+ sda = <&pio4 6 ALT1 BIDIR>;
+ scl = <&pio4 5 ALT1 BIDIR>;
};
};
};
@@ -150,8 +150,8 @@
sbc_i2c1 {
pinctrl_sbc_i2c1_default: sbc_i2c1-default {
st,pins {
- sda = <&PIO3 2 ALT2 BIDIR>;
- scl = <&PIO3 1 ALT2 BIDIR>;
+ sda = <&pio3 2 ALT2 BIDIR>;
+ scl = <&pio3 1 ALT2 BIDIR>;
};
};
};
@@ -159,51 +159,51 @@
gmac1 {
pinctrl_mii1: mii1 {
st,pins {
- txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
- col = <&PIO0 7 ALT1 IN BYPASS 1000>;
-
- mdio = <&PIO1 0 ALT1 OUT BYPASS 1500>;
- mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
- crs = <&PIO1 2 ALT1 IN BYPASS 1000>;
- mdint = <&PIO1 3 ALT1 IN BYPASS 0>;
- rxd0 = <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxd1 = <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxd2 = <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxd3 = <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-
- rxdv = <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
- phyclk = <&PIO2 3 ALT1 OUT NICLK 0 CLK_A>;
+ txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+ col = <&pio0 7 ALT1 IN BYPASS 1000>;
+
+ mdio = <&pio1 0 ALT1 OUT BYPASS 1500>;
+ mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+ crs = <&pio1 2 ALT1 IN BYPASS 1000>;
+ mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+ rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+
+ rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
};
};
pinctrl_rgmii1: rgmii1-0 {
st,pins {
- txd0 = <&PIO0 0 ALT1 OUT DE_IO 500 CLK_A>;
- txd1 = <&PIO0 1 ALT1 OUT DE_IO 500 CLK_A>;
- txd2 = <&PIO0 2 ALT1 OUT DE_IO 500 CLK_A>;
- txd3 = <&PIO0 3 ALT1 OUT DE_IO 500 CLK_A>;
- txen = <&PIO0 5 ALT1 OUT DE_IO 0 CLK_A>;
- txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
-
- mdio = <&PIO1 0 ALT1 OUT BYPASS 0>;
- mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
- rxd0 = <&PIO1 4 ALT1 IN DE_IO 500 CLK_A>;
- rxd1 = <&PIO1 5 ALT1 IN DE_IO 500 CLK_A>;
- rxd2 = <&PIO1 6 ALT1 IN DE_IO 500 CLK_A>;
- rxd3 = <&PIO1 7 ALT1 IN DE_IO 500 CLK_A>;
-
- rxdv = <&PIO2 0 ALT1 IN DE_IO 500 CLK_A>;
- rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
- phyclk = <&PIO2 3 ALT4 OUT NICLK 0 CLK_B>;
-
- clk125= <&PIO3 7 ALT4 IN NICLK 0 CLK_A>;
+ txd0 = <&pio0 0 ALT1 OUT DE_IO 500 CLK_A>;
+ txd1 = <&pio0 1 ALT1 OUT DE_IO 500 CLK_A>;
+ txd2 = <&pio0 2 ALT1 OUT DE_IO 500 CLK_A>;
+ txd3 = <&pio0 3 ALT1 OUT DE_IO 500 CLK_A>;
+ txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>;
+ txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+
+ mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+ mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+ rxd0 = <&pio1 4 ALT1 IN DE_IO 500 CLK_A>;
+ rxd1 = <&pio1 5 ALT1 IN DE_IO 500 CLK_A>;
+ rxd2 = <&pio1 6 ALT1 IN DE_IO 500 CLK_A>;
+ rxd3 = <&pio1 7 ALT1 IN DE_IO 500 CLK_A>;
+
+ rxdv = <&pio2 0 ALT1 IN DE_IO 500 CLK_A>;
+ rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&pio2 3 ALT4 OUT NICLK 0 CLK_B>;
+
+ clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
};
};
};
@@ -220,7 +220,7 @@
interrupts-names = "irqmux";
ranges = <0 0xfee00000 0x10000>;
- PIO5: gpio@fee00000 {
+ pio5: gpio@fee00000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -228,7 +228,7 @@
reg = <0 0x100>;
st,bank-name = "PIO5";
};
- PIO6: gpio@fee01000 {
+ pio6: gpio@fee01000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -236,7 +236,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO6";
};
- PIO7: gpio@fee02000 {
+ pio7: gpio@fee02000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -244,7 +244,7 @@
reg = <0x2000 0x100>;
st,bank-name = "PIO7";
};
- PIO8: gpio@fee03000 {
+ pio8: gpio@fee03000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -252,7 +252,7 @@
reg = <0x3000 0x100>;
st,bank-name = "PIO8";
};
- PIO9: gpio@fee04000 {
+ pio9: gpio@fee04000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -260,7 +260,7 @@
reg = <0x4000 0x100>;
st,bank-name = "PIO9";
};
- PIO10: gpio@fee05000 {
+ pio10: gpio@fee05000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -268,7 +268,7 @@
reg = <0x5000 0x100>;
st,bank-name = "PIO10";
};
- PIO11: gpio@fee06000 {
+ pio11: gpio@fee06000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -276,7 +276,7 @@
reg = <0x6000 0x100>;
st,bank-name = "PIO11";
};
- PIO12: gpio@fee07000 {
+ pio12: gpio@fee07000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -284,7 +284,7 @@
reg = <0x7000 0x100>;
st,bank-name = "PIO12";
};
- PIO30: gpio@fee08000 {
+ pio30: gpio@fee08000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -292,7 +292,7 @@
reg = <0x8000 0x100>;
st,bank-name = "PIO30";
};
- PIO31: gpio@fee09000 {
+ pio31: gpio@fee09000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -304,7 +304,7 @@
serial2-oe {
pinctrl_serial2_oe: serial2-1 {
st,pins {
- output-enable = <&PIO11 3 ALT2 OUT>;
+ output-enable = <&pio11 3 ALT2 OUT>;
};
};
};
@@ -312,8 +312,8 @@
i2c0 {
pinctrl_i2c0_default: i2c0-default {
st,pins {
- sda = <&PIO9 3 ALT1 BIDIR>;
- scl = <&PIO9 2 ALT1 BIDIR>;
+ sda = <&pio9 3 ALT1 BIDIR>;
+ scl = <&pio9 2 ALT1 BIDIR>;
};
};
};
@@ -321,8 +321,8 @@
i2c1 {
pinctrl_i2c1_default: i2c1-default {
st,pins {
- sda = <&PIO12 1 ALT1 BIDIR>;
- scl = <&PIO12 0 ALT1 BIDIR>;
+ sda = <&pio12 1 ALT1 BIDIR>;
+ scl = <&pio12 0 ALT1 BIDIR>;
};
};
};
@@ -330,12 +330,12 @@
fsm {
pinctrl_fsm: fsm {
st,pins {
- spi-fsm-clk = <&PIO12 2 ALT1 OUT>;
- spi-fsm-cs = <&PIO12 3 ALT1 OUT>;
- spi-fsm-mosi = <&PIO12 4 ALT1 OUT>;
- spi-fsm-miso = <&PIO12 5 ALT1 IN>;
- spi-fsm-hol = <&PIO12 6 ALT1 OUT>;
- spi-fsm-wp = <&PIO12 7 ALT1 OUT>;
+ spi-fsm-clk = <&pio12 2 ALT1 OUT>;
+ spi-fsm-cs = <&pio12 3 ALT1 OUT>;
+ spi-fsm-mosi = <&pio12 4 ALT1 OUT>;
+ spi-fsm-miso = <&pio12 5 ALT1 IN>;
+ spi-fsm-hol = <&pio12 6 ALT1 OUT>;
+ spi-fsm-wp = <&pio12 7 ALT1 OUT>;
};
};
};
@@ -352,7 +352,7 @@
interrupts-names = "irqmux";
ranges = <0 0xfe820000 0x6000>;
- PIO13: gpio@fe820000 {
+ pio13: gpio@fe820000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -360,7 +360,7 @@
reg = <0 0x100>;
st,bank-name = "PIO13";
};
- PIO14: gpio@fe821000 {
+ pio14: gpio@fe821000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -368,7 +368,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO14";
};
- PIO15: gpio@fe822000 {
+ pio15: gpio@fe822000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -376,7 +376,7 @@
reg = <0x2000 0x100>;
st,bank-name = "PIO15";
};
- PIO16: gpio@fe823000 {
+ pio16: gpio@fe823000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -384,7 +384,7 @@
reg = <0x3000 0x100>;
st,bank-name = "PIO16";
};
- PIO17: gpio@fe824000 {
+ pio17: gpio@fe824000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -392,7 +392,7 @@
reg = <0x4000 0x100>;
st,bank-name = "PIO17";
};
- PIO18: gpio@fe825000 {
+ pio18: gpio@fe825000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -405,8 +405,8 @@
serial2 {
pinctrl_serial2: serial2-0 {
st,pins {
- tx = <&PIO17 4 ALT2 OUT>;
- rx = <&PIO17 5 ALT2 IN>;
+ tx = <&pio17 4 ALT2 OUT>;
+ rx = <&pio17 5 ALT2 IN>;
};
};
};
@@ -414,28 +414,28 @@
gmac0 {
pinctrl_mii0: mii0 {
st,pins {
- mdint = <&PIO13 6 ALT2 IN BYPASS 0>;
- txen = <&PIO13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- txd0 = <&PIO14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- txd1 = <&PIO14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- txd2 = <&PIO14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
- txd3 = <&PIO14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
-
- txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
- txer = <&PIO15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- crs = <&PIO15 2 ALT2 IN BYPASS 1000>;
- col = <&PIO15 3 ALT2 IN BYPASS 1000>;
- mdio= <&PIO15 4 ALT2 OUT BYPASS 1500>;
- mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
-
- rxd0 = <&PIO16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxd1 = <&PIO16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxd2 = <&PIO16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxd3 = <&PIO16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxdv = <&PIO15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
- phyclk = <&PIO13 5 ALT2 OUT NICLK 0 CLK_B>;
+ mdint = <&pio13 6 ALT2 IN BYPASS 0>;
+ txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+ txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+
+ txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
+ txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ crs = <&pio15 2 ALT2 IN BYPASS 1000>;
+ col = <&pio15 3 ALT2 IN BYPASS 1000>;
+ mdio= <&pio15 4 ALT2 OUT BYPASS 1500>;
+ mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
+
+ rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>;
+ phyclk = <&pio13 5 ALT2 OUT NICLK 0 CLK_B>;
};
};
@@ -445,25 +445,25 @@
};
pinctrl_rgmii0: rgmii0 {
st,pins {
- phyclk = <&PIO13 5 ALT4 OUT NICLK 0 CLK_B>;
- txen = <&PIO13 7 ALT2 OUT DE_IO 0 CLK_A>;
- txd0 = <&PIO14 0 ALT2 OUT DE_IO 500 CLK_A>;
- txd1 = <&PIO14 1 ALT2 OUT DE_IO 500 CLK_A>;
- txd2 = <&PIO14 2 ALT2 OUT DE_IO 500 CLK_B>;
- txd3 = <&PIO14 3 ALT2 OUT DE_IO 500 CLK_B>;
- txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
-
- mdio = <&PIO15 4 ALT2 OUT BYPASS 0>;
- mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
-
- rxdv = <&PIO15 6 ALT2 IN DE_IO 500 CLK_A>;
- rxd0 =<&PIO16 0 ALT2 IN DE_IO 500 CLK_A>;
- rxd1 =<&PIO16 1 ALT2 IN DE_IO 500 CLK_A>;
- rxd2 =<&PIO16 2 ALT2 IN DE_IO 500 CLK_A>;
- rxd3 =<&PIO16 3 ALT2 IN DE_IO 500 CLK_A>;
- rxclk =<&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
-
- clk125=<&PIO17 6 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&pio13 5 ALT4 OUT NICLK 0 CLK_B>;
+ txen = <&pio13 7 ALT2 OUT DE_IO 0 CLK_A>;
+ txd0 = <&pio14 0 ALT2 OUT DE_IO 500 CLK_A>;
+ txd1 = <&pio14 1 ALT2 OUT DE_IO 500 CLK_A>;
+ txd2 = <&pio14 2 ALT2 OUT DE_IO 500 CLK_B>;
+ txd3 = <&pio14 3 ALT2 OUT DE_IO 500 CLK_B>;
+ txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
+
+ mdio = <&pio15 4 ALT2 OUT BYPASS 0>;
+ mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
+
+ rxdv = <&pio15 6 ALT2 IN DE_IO 500 CLK_A>;
+ rxd0 =<&pio16 0 ALT2 IN DE_IO 500 CLK_A>;
+ rxd1 =<&pio16 1 ALT2 IN DE_IO 500 CLK_A>;
+ rxd2 =<&pio16 2 ALT2 IN DE_IO 500 CLK_A>;
+ rxd3 =<&pio16 3 ALT2 IN DE_IO 500 CLK_A>;
+ rxclk =<&pio17 0 ALT2 IN NICLK 0 CLK_A>;
+
+ clk125=<&pio17 6 ALT1 IN NICLK 0 CLK_A>;
};
};
};
@@ -480,7 +480,7 @@
interrupts-names = "irqmux";
ranges = <0 0xfd6b0000 0x3000>;
- PIO100: gpio@fd6b0000 {
+ pio100: gpio@fd6b0000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -488,7 +488,7 @@
reg = <0 0x100>;
st,bank-name = "PIO100";
};
- PIO101: gpio@fd6b1000 {
+ pio101: gpio@fd6b1000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -496,7 +496,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO101";
};
- PIO102: gpio@fd6b2000 {
+ pio102: gpio@fd6b2000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -517,7 +517,7 @@
interrupts-names = "irqmux";
ranges = <0 0xfd330000 0x5000>;
- PIO103: gpio@fd330000 {
+ pio103: gpio@fd330000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -525,7 +525,7 @@
reg = <0 0x100>;
st,bank-name = "PIO103";
};
- PIO104: gpio@fd331000 {
+ pio104: gpio@fd331000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -533,7 +533,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO104";
};
- PIO105: gpio@fd332000 {
+ pio105: gpio@fd332000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -541,7 +541,7 @@
reg = <0x2000 0x100>;
st,bank-name = "PIO105";
};
- PIO106: gpio@fd333000 {
+ pio106: gpio@fd333000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -550,7 +550,7 @@
st,bank-name = "PIO106";
};
- PIO107: gpio@fd334000 {
+ pio107: gpio@fd334000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/stih41x-b2000.dtsi b/arch/arm/boot/dts/stih41x-b2000.dtsi
index b3dd6ca..5f91f45 100644
--- a/arch/arm/boot/dts/stih41x-b2000.dtsi
+++ b/arch/arm/boot/dts/stih41x-b2000.dtsi
@@ -35,7 +35,7 @@
fp_led {
#gpio-cells = <1>;
label = "Front Panel LED";
- gpios = <&PIO105 7>;
+ gpios = <&pio105 7>;
linux,default-trigger = "heartbeat";
};
};
@@ -55,7 +55,7 @@
phy-mode = "mii";
pinctrl-0 = <&pinctrl_mii0>;
- snps,reset-gpio = <&PIO106 2>;
+ snps,reset-gpio = <&pio106 2>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 10000>;
};
@@ -65,7 +65,7 @@
phy-mode = "mii";
st,tx-retime-src = "txclk";
- snps,reset-gpio = <&PIO4 7>;
+ snps,reset-gpio = <&pio4 7>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 10000>;
};
diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi
index d8a8429..c0f50e9 100644
--- a/arch/arm/boot/dts/stih41x-b2020.dtsi
+++ b/arch/arm/boot/dts/stih41x-b2020.dtsi
@@ -32,11 +32,11 @@
red {
#gpio-cells = <1>;
label = "Front Panel LED";
- gpios = <&PIO4 1>;
+ gpios = <&pio4 1>;
linux,default-trigger = "heartbeat";
};
green {
- gpios = <&PIO4 7>;
+ gpios = <&pio4 7>;
default-state = "off";
};
};
@@ -68,7 +68,7 @@
phy-mode = "rgmii-id";
max-speed = <1000>;
st,tx-retime-src = "clk_125";
- snps,reset-gpio = <&PIO3 0>;
+ snps,reset-gpio = <&pio3 0>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 10000>;
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/