[PATCH] usb: pci-quirks: do not access OHCI_FMINTERVAL register on ULI hw

From: Nikita Yushchenko
Date: Tue May 27 2014 - 00:57:24 EST


This access causes hang on Freescale P2020DS board (that has OHCI
provided by ULI 1533 chip).

Since preserving OHCI_FMINTERVAL was originally done only for NVIDIA
hardware and only later (in c6187597) was turned unconditional, and
c6187597 commit message again mentions only NVIDIA, I think it should be
safe to disable preserving OHCI_FMINTERVAL if device vendor is ULI.

Signed-off-by: Nikita Yushchenko <nyushchenko@xxxxxxxxxxxxx>
---
drivers/usb/host/pci-quirks.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 00661d3..5acbd5b 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -571,7 +571,7 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
{
void __iomem *base;
u32 control;
- u32 fminterval;
+ u32 uninitialized_var(fminterval);
int cnt;

if (!mmio_resource_enabled(pdev, 0))
@@ -619,7 +619,8 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
}

/* software reset of the controller, preserving HcFmInterval */
- fminterval = readl(base + OHCI_FMINTERVAL);
+ if (pdev->vendor != PCI_VENDOR_ID_AL)
+ fminterval = readl(base + OHCI_FMINTERVAL);
writel(OHCI_HCR, base + OHCI_CMDSTATUS);

/* reset requires max 10 us delay */
@@ -628,7 +629,8 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
break;
udelay(1);
}
- writel(fminterval, base + OHCI_FMINTERVAL);
+ if (pdev->vendor != PCI_VENDOR_ID_AL)
+ writel(fminterval, base + OHCI_FMINTERVAL);

/* Now the controller is safely in SUSPEND and nothing can wake it up */
iounmap(base);
--
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/