[PATCH 3.4 30/43] usb: musb: set TXMAXP and AUTOSET for full speed bulk in device mode

From: Greg Kroah-Hartman
Date: Sun May 04 2014 - 11:47:58 EST


3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: supriya karanth <supriya.karanth@xxxxxxxxxxxxxx>

commit bb3a2ef2eb8cfaea335dcb3426350df7f3d48069 upstream.

The TXMAXP register is not set correctly for full speed bulk case
when the can_bulk_split() is used. Without this PIO transfers will
not take place correctly

The "mult" factor needs to be updated correctly for the
can_bulk_split() case

The AUTOSET bit in the TXCSR is not being set if the "mult"
factor is greater than 0 for the High Bandwidth ISO case.
But the "mult" factor is also greater than 0 in case of Full speed
bulk transfers with the packet splitting in TXMAXP register

Without the AUTOSET the DMA transfers will not progress in mode1

[ balbi@xxxxxx : add braces to both branches ]

Signed-off-by: supriya karanth <supriya.karanth@xxxxxxxxxxxxxx>
Signed-off-by: Praveena NADAHALLY <praveen.nadahally@xxxxxxxxxxxxxx>
Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
Cc: ian coolidge <iancoolidge@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
drivers/usb/musb/musb_gadget.c | 22 +++++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)

--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -401,7 +401,19 @@ static void txstate(struct musb *musb, s
csr |= (MUSB_TXCSR_DMAENAB
| MUSB_TXCSR_DMAMODE
| MUSB_TXCSR_MODE);
- if (!musb_ep->hb_mult)
+ /*
+ * Enable Autoset according to table
+ * below
+ * bulk_split hb_mult Autoset_Enable
+ * 0 0 Yes(Normal)
+ * 0 >0 No(High BW ISO)
+ * 1 0 Yes(HS bulk)
+ * 1 >0 Yes(FS bulk)
+ */
+ if (!musb_ep->hb_mult ||
+ (musb_ep->hb_mult &&
+ can_bulk_split(musb,
+ musb_ep->type)))
csr |= MUSB_TXCSR_AUTOSET;
}
csr &= ~MUSB_TXCSR_P_UNDERRUN;
@@ -1100,11 +1112,15 @@ static int musb_gadget_enable(struct usb
/* Set TXMAXP with the FIFO size of the endpoint
* to disable double buffering mode.
*/
- if (musb->double_buffer_not_ok)
+ if (musb->double_buffer_not_ok) {
musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx);
- else
+ } else {
+ if (can_bulk_split(musb, musb_ep->type))
+ musb_ep->hb_mult = (hw_ep->max_packet_sz_tx /
+ musb_ep->packet_sz) - 1;
musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz
| (musb_ep->hb_mult << 11));
+ }

csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
if (musb_readw(regs, MUSB_TXCSR)


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/