PROBLEM: [HP Split 13-m110ca x2 PC] Touchpad not working

From: Vincent Fortier
Date: Sun Apr 27 2014 - 08:11:49 EST


Touchpad not working with hp split x2 - Identified as upstream problem
as part of launchpad #1312489

---

Tested with:

default Ubuntu 14.04 (3.13.0)

upstream (3.15.0-rc2)

$ cat /proc/version
Linux version 3.15.0-031500rc2-generic (apw@gomeisa) (gcc version
4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201404201435 SMP Sun Apr 20
18:36:18 UTC 2014

---

I did noticed USB errors at boot time which may be relevant (attached dmesg):

[ 4.078636] usb 2-6: device descriptor read/64, error -71
[ 4.182641] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command
for slot 3.
[ 4.182726] usb 2-6: hub failed to enable device, error -22
[ 4.406874] usb 2-6: device descriptor read/64, error -71
[ 4.510833] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command
for slot 4.
[ 4.510919] usb 2-6: hub failed to enable device, error -22
[ 5.031131] usb 2-6: device not accepting address 6, error -71
[ 5.551425] usb 2-6: device not accepting address 7, error -71

---

$ lsb_release -rd
Description: Ubuntu 14.04 LTS
Release: 14.04

Link to launchpad: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1312489
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 69
model name : Intel(R) Core(TM) i3-4010Y CPU @ 1.30GHz
stepping : 1
microcode : 0x14
cpu MHz : 805.187
cache size : 3072 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid
bogomips : 2593.79
clflush size : 64
cache_alignment : 64
address sizes : 39 bits physical, 48 bits virtual
power management:

processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 69
model name : Intel(R) Core(TM) i3-4010Y CPU @ 1.30GHz
stepping : 1
microcode : 0x14
cpu MHz : 805.187
cache size : 3072 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid
bogomips : 2593.79
clflush size : 64
cache_alignment : 64
address sizes : 39 bits physical, 48 bits virtual
power management:

processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 69
model name : Intel(R) Core(TM) i3-4010Y CPU @ 1.30GHz
stepping : 1
microcode : 0x14
cpu MHz : 805.187
cache size : 3072 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 2
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid
bogomips : 2593.79
clflush size : 64
cache_alignment : 64
address sizes : 39 bits physical, 48 bits virtual
power management:

processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 69
model name : Intel(R) Core(TM) i3-4010Y CPU @ 1.30GHz
stepping : 1
microcode : 0x14
cpu MHz : 805.187
cache size : 3072 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 2
apicid : 3
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid
bogomips : 2593.79
clflush size : 64
cache_alignment : 64
address sizes : 39 bits physical, 48 bits virtual
power management:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.15.0-031500rc2-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201404201435 SMP Sun Apr 20 18:36:18 UTC 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.15.0-031500rc2-generic root=UUID=01199aaf-45ab-40c4-9f1f-b0dd8c069a68 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009269efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009269f000-0x000000009289efff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000009289f000-0x0000000092eaefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000092eaf000-0x0000000092faefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000092faf000-0x0000000092ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000092fff000-0x0000000092ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000093000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x92ffe000 ACPI 2.0=0x92ffe014 SMBIOS=0x92eaef98
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000006f000) (0MB)
[ 0.000000] efi: mem02: type=0, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem05: type=0, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001504000) (20MB)
[ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000001504000-0x0000000002000000) (10MB)
[ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000002000000-0x0000000003404000) (20MB)
[ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000003404000-0x0000000035c92000) (808MB)
[ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x0000000035c92000-0x0000000036e41000) (17MB)
[ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x0000000036e41000-0x0000000044add000) (220MB)
[ 0.000000] efi: mem12: type=2, attr=0xf, range=[0x0000000044add000-0x00000000686b0000) (571MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x00000000686b0000-0x00000000686d0000) (0MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x00000000686d0000-0x0000000072c33000) (165MB)
[ 0.000000] efi: mem15: type=2, attr=0xf, range=[0x0000000072c33000-0x0000000072d1e000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000072d1e000-0x0000000072d22000) (0MB)
[ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x0000000072d22000-0x0000000072d27000) (0MB)
[ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x0000000072d27000-0x0000000072d29000) (0MB)
[ 0.000000] efi: mem19: type=2, attr=0xf, range=[0x0000000072d29000-0x0000000072e13000) (0MB)
[ 0.000000] efi: mem20: type=4, attr=0xf, range=[0x0000000072e13000-0x00000000736a0000) (8MB)
[ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000736a0000-0x00000000736a4000) (0MB)
[ 0.000000] efi: mem22: type=2, attr=0xf, range=[0x00000000736a4000-0x00000000736a6000) (0MB)
[ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000736a6000-0x00000000736a8000) (0MB)
[ 0.000000] efi: mem24: type=2, attr=0xf, range=[0x00000000736a8000-0x00000000736a9000) (0MB)
[ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000736a9000-0x00000000736ab000) (0MB)
[ 0.000000] efi: mem26: type=2, attr=0xf, range=[0x00000000736ab000-0x00000000736ac000) (0MB)
[ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000736ac000-0x00000000736ad000) (0MB)
[ 0.000000] efi: mem28: type=2, attr=0xf, range=[0x00000000736ad000-0x00000000736af000) (0MB)
[ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000736af000-0x000000007377b000) (0MB)
[ 0.000000] efi: mem30: type=1, attr=0xf, range=[0x000000007377b000-0x00000000738af000) (1MB)
[ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000738af000-0x00000000777aa000) (62MB)
[ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000777aa000-0x000000007802c000) (8MB)
[ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x000000007802c000-0x0000000078229000) (1MB)
[ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x0000000078229000-0x00000000783b0000) (1MB)
[ 0.000000] efi: mem35: type=7, attr=0xf, range=[0x00000000783b0000-0x00000000783b3000) (0MB)
[ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x00000000783b3000-0x00000000783b9000) (0MB)
[ 0.000000] efi: mem37: type=7, attr=0xf, range=[0x00000000783b9000-0x00000000783ba000) (0MB)
[ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x00000000783ba000-0x00000000783e5000) (0MB)
[ 0.000000] efi: mem39: type=7, attr=0xf, range=[0x00000000783e5000-0x00000000783e6000) (0MB)
[ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000783e6000-0x0000000078539000) (1MB)
[ 0.000000] efi: mem41: type=7, attr=0xf, range=[0x0000000078539000-0x000000007853c000) (0MB)
[ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x000000007853c000-0x0000000078565000) (0MB)
[ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x0000000078565000-0x0000000078567000) (0MB)
[ 0.000000] efi: mem44: type=4, attr=0xf, range=[0x0000000078567000-0x0000000078568000) (0MB)
[ 0.000000] efi: mem45: type=7, attr=0xf, range=[0x0000000078568000-0x000000007856b000) (0MB)
[ 0.000000] efi: mem46: type=4, attr=0xf, range=[0x000000007856b000-0x000000007856f000) (0MB)
[ 0.000000] efi: mem47: type=7, attr=0xf, range=[0x000000007856f000-0x0000000078570000) (0MB)
[ 0.000000] efi: mem48: type=4, attr=0xf, range=[0x0000000078570000-0x00000000785a4000) (0MB)
[ 0.000000] efi: mem49: type=7, attr=0xf, range=[0x00000000785a4000-0x00000000785a5000) (0MB)
[ 0.000000] efi: mem50: type=4, attr=0xf, range=[0x00000000785a5000-0x00000000785a8000) (0MB)
[ 0.000000] efi: mem51: type=7, attr=0xf, range=[0x00000000785a8000-0x00000000785b4000) (0MB)
[ 0.000000] efi: mem52: type=4, attr=0xf, range=[0x00000000785b4000-0x00000000785b5000) (0MB)
[ 0.000000] efi: mem53: type=7, attr=0xf, range=[0x00000000785b5000-0x00000000785b9000) (0MB)
[ 0.000000] efi: mem54: type=4, attr=0xf, range=[0x00000000785b9000-0x0000000078611000) (0MB)
[ 0.000000] efi: mem55: type=7, attr=0xf, range=[0x0000000078611000-0x0000000078612000) (0MB)
[ 0.000000] efi: mem56: type=4, attr=0xf, range=[0x0000000078612000-0x0000000078613000) (0MB)
[ 0.000000] efi: mem57: type=7, attr=0xf, range=[0x0000000078613000-0x0000000078614000) (0MB)
[ 0.000000] efi: mem58: type=4, attr=0xf, range=[0x0000000078614000-0x0000000078615000) (0MB)
[ 0.000000] efi: mem59: type=7, attr=0xf, range=[0x0000000078615000-0x0000000078616000) (0MB)
[ 0.000000] efi: mem60: type=4, attr=0xf, range=[0x0000000078616000-0x000000007861f000) (0MB)
[ 0.000000] efi: mem61: type=7, attr=0xf, range=[0x000000007861f000-0x0000000078620000) (0MB)
[ 0.000000] efi: mem62: type=4, attr=0xf, range=[0x0000000078620000-0x0000000078637000) (0MB)
[ 0.000000] efi: mem63: type=7, attr=0xf, range=[0x0000000078637000-0x0000000078638000) (0MB)
[ 0.000000] efi: mem64: type=4, attr=0xf, range=[0x0000000078638000-0x0000000078677000) (0MB)
[ 0.000000] efi: mem65: type=7, attr=0xf, range=[0x0000000078677000-0x000000007867e000) (0MB)
[ 0.000000] efi: mem66: type=4, attr=0xf, range=[0x000000007867e000-0x0000000078681000) (0MB)
[ 0.000000] efi: mem67: type=7, attr=0xf, range=[0x0000000078681000-0x0000000078683000) (0MB)
[ 0.000000] efi: mem68: type=4, attr=0xf, range=[0x0000000078683000-0x0000000078684000) (0MB)
[ 0.000000] efi: mem69: type=7, attr=0xf, range=[0x0000000078684000-0x0000000078686000) (0MB)
[ 0.000000] efi: mem70: type=4, attr=0xf, range=[0x0000000078686000-0x00000000787a1000) (1MB)
[ 0.000000] efi: mem71: type=7, attr=0xf, range=[0x00000000787a1000-0x00000000787a4000) (0MB)
[ 0.000000] efi: mem72: type=4, attr=0xf, range=[0x00000000787a4000-0x0000000079fcf000) (24MB)
[ 0.000000] efi: mem73: type=7, attr=0xf, range=[0x0000000079fcf000-0x00000000921ff000) (386MB)
[ 0.000000] efi: mem74: type=2, attr=0xf, range=[0x00000000921ff000-0x000000009220b000) (0MB)
[ 0.000000] efi: mem75: type=3, attr=0xf, range=[0x000000009220b000-0x000000009269f000) (4MB)
[ 0.000000] efi: mem76: type=5, attr=0x800000000000000f, range=[0x000000009269f000-0x000000009289f000) (2MB)
[ 0.000000] efi: mem77: type=6, attr=0x800000000000000f, range=[0x000000009289f000-0x0000000092aaf000) (2MB)
[ 0.000000] efi: mem78: type=0, attr=0xf, range=[0x0000000092aaf000-0x0000000092eaf000) (4MB)
[ 0.000000] efi: mem79: type=10, attr=0xf, range=[0x0000000092eaf000-0x0000000092faf000) (1MB)
[ 0.000000] efi: mem80: type=9, attr=0xf, range=[0x0000000092faf000-0x0000000092fff000) (0MB)
[ 0.000000] efi: mem81: type=4, attr=0xf, range=[0x0000000092fff000-0x0000000093000000) (0MB)
[ 0.000000] efi: mem82: type=7, attr=0xf, range=[0x0000000100000000-0x000000015f600000) (1526MB)
[ 0.000000] efi: mem83: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem84: type=0, attr=0x0, range=[0x0000000093000000-0x000000009fa00000) (202MB)
[ 0.000000] efi: mem85: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[ 0.000000] efi: mem86: type=0, attr=0x0, range=[0x00000000fe101000-0x00000000fe113000) (0MB)
[ 0.000000] efi: mem87: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb10000) (0MB)
[ 0.000000] efi: mem88: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem89: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed1c000) (0MB)
[ 0.000000] efi: mem90: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem91: type=11, attr=0x8000000000000001, range=[0x00000000fed20000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem92: type=11, attr=0x8000000000000001, range=[0x00000000ffb00000-0x0000000100000000) (5MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP Split 13 x2 PC/215B, BIOS F.24 11/26/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x15f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0093000000 mask 7FFF000000 uncachable
[ 0.000000] 2 base 0094000000 mask 7FFC000000 uncachable
[ 0.000000] 3 base 0098000000 mask 7FF8000000 uncachable
[ 0.000000] 4 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 5 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 8GB, type WB
[ 0.000000] reg 1, base: 2352MB, range: 16MB, type UC
[ 0.000000] reg 2, base: 2368MB, range: 64MB, type UC
[ 0.000000] reg 3, base: 2432MB, range: 128MB, type UC
[ 0.000000] reg 4, base: 2560MB, range: 512MB, type UC
[ 0.000000] reg 5, base: 3GB, range: 1GB, type UC
[ 0.000000] total RAM covered: 6448M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 5 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 256MB, type WB
[ 0.000000] reg 2, base: 2304MB, range: 32MB, type WB
[ 0.000000] reg 3, base: 2336MB, range: 16MB, type WB
[ 0.000000] reg 4, base: 4GB, range: 4GB, type WB
[ 0.000000] e820: update [mem 0x93000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x93000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff88000007c000] 7c000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02fe2000, 0x02fe2fff] PGTABLE
[ 0.000000] BRK [0x02fe3000, 0x02fe3fff] PGTABLE
[ 0.000000] BRK [0x02fe4000, 0x02fe4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x15f400000-0x15f5fffff]
[ 0.000000] [mem 0x15f400000-0x15f5fffff] page 2M
[ 0.000000] BRK [0x02fe5000, 0x02fe5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x15c000000-0x15f3fffff]
[ 0.000000] [mem 0x15c000000-0x15f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
[ 0.000000] [mem 0x100000000-0x13fffffff] page 1G
[ 0.000000] [mem 0x140000000-0x15bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9269efff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x925fffff] page 2M
[ 0.000000] [mem 0x92600000-0x9269efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x92fff000-0x92ffffff]
[ 0.000000] [mem 0x92fff000-0x92ffffff] page 4k
[ 0.000000] BRK [0x02fe6000, 0x02fe6fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35c92000-0x36e40fff]
[ 0.000000] ACPI: RSDP 0x0000000092FFE014 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x0000000092FFE210 0000AC (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
[ 0.000000] ACPI: FACP 0x0000000092FF8000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: DSDT 0x0000000092FE4000 010ECC (v01 HPQOEM 215B 00000000 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x0000000092FAA000 000040
[ 0.000000] ACPI: UEFI 0x0000000092FFD000 000236 (v01 HPQOEM 215B 00000001 HP 00040000)
[ 0.000000] ACPI: FPDT 0x0000000092FFB000 000044 (v01 HPQOEM 215B 00000001 HP 00040000)
[ 0.000000] ACPI: MSDM 0x0000000092FFA000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: ASF! 0x0000000092FF9000 0000A5 (v32 HPQOEM 215B 00000001 HP 00040000)
[ 0.000000] ACPI: HPET 0x0000000092FF7000 000038 (v01 HPQOEM 215B 00000001 HP 00040000)
[ 0.000000] ACPI: APIC 0x0000000092FF6000 00008C (v03 HPQOEM 215B 00000001 HP 00040000)
[ 0.000000] ACPI: MCFG 0x0000000092FF5000 00003C (v01 HPQOEM 215B 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 0x0000000092FE2000 0010BF (v01 HPQOEM 215B 00001000 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x0000000092FE0000 000028 (v01 HPQOEM 215B 00000001 HP 00040000)
[ 0.000000] ACPI: LPIT 0x0000000092FDF000 00005C (v01 HPQOEM 215B 00000001 HP 00040000)
[ 0.000000] ACPI: ASPT 0x0000000092FDD000 000034 (v07 HPQOEM 215B 00000001 HP 00040000)
[ 0.000000] ACPI: DBGP 0x0000000092FDC000 000034 (v01 HPQOEM 215B 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 0x0000000092FDB000 000452 (v01 HPQOEM 215B 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000092FDA000 000AD8 (v01 HPQOEM 215B 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000092FD7000 002A63 (v01 HPQOEM 215B 00003000 ACPI 00040000)
[ 0.000000] ACPI: BGRT 0x0000000092FD6000 000038 (v01 HPQOEM 215B 00000001 HP 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000015f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x15f5fffff]
[ 0.000000] NODE_DATA [mem 0x15f5f9000-0x15f5fdfff]
[ 0.000000] [ffffea0000000000-ffffea00057fffff] PMD -> [ffff88015ae00000-ffff88015ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x15f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0006efff]
[ 0.000000] node 0: [mem 0x00070000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x9269efff]
[ 0.000000] node 0: [mem 0x92fff000-0x92ffffff]
[ 0.000000] node 0: [mem 0x100000000-0x15f5fffff]
[ 0.000000] On node 0 totalpages: 990246
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 23 pages reserved
[ 0.000000] DMA zone: 3974 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9307 pages used for memmap
[ 0.000000] DMA32 zone: 595616 pages, LIFO batch:31
[ 0.000000] Normal zone: 6104 pages used for memmap
[ 0.000000] Normal zone: 390656 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9269f000-0x9289efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9289f000-0x92eaefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x92eaf000-0x92faefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x92faf000-0x92ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x93000000-0x9f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88015f200000 s86656 r8192 d23936 u262144
[ 0.000000] pcpu-alloc: s86656 r8192 d23936 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 974748
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.15.0-031500rc2-generic root=UUID=01199aaf-45ab-40c4-9f1f-b0dd8c069a68 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3743300K/3960984K available (7658K kernel code, 1147K rwdata, 3624K rodata, 1356K init, 1432K bss, 217684K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:16640 nr_irqs:1016 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16252928 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1297.003 MHz processor
[ 0.000091] Calibrating delay loop (skipped), value calculated using timer frequency.. 2594.00 BogoMIPS (lpj=5188012)
[ 0.000100] pid_max: default: 32768 minimum: 301
[ 0.000121] ACPI: Core revision 20140214
[ 0.040086] ACPI: All ACPI Tables successfully acquired
[ 0.087554] Security Framework initialized
[ 0.087587] AppArmor: AppArmor initialized
[ 0.087590] Yama: becoming mindful.
[ 0.088577] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.091327] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.093076] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.093094] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.093740] Initializing cgroup subsys memory
[ 0.093754] Initializing cgroup subsys devices
[ 0.093759] Initializing cgroup subsys freezer
[ 0.093762] Initializing cgroup subsys net_cls
[ 0.093766] Initializing cgroup subsys blkio
[ 0.093770] Initializing cgroup subsys perf_event
[ 0.093775] Initializing cgroup subsys net_prio
[ 0.093779] Initializing cgroup subsys hugetlb
[ 0.093836] CPU: Physical Processor ID: 0
[ 0.093839] CPU: Processor Core ID: 0
[ 0.093851] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.093851] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.096288] mce: CPU supports 7 MCE banks
[ 0.096329] CPU0: Thermal monitoring enabled (TM1)
[ 0.096362] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.096362] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.096362] tlb_flushall_shift: 6
[ 0.096666] Freeing SMP alternatives memory: 28K (ffffffff81e73000 - ffffffff81e7a000)
[ 0.105365] ftrace: allocating 31812 entries in 125 pages
[ 0.146324] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.186043] smpboot: CPU0: Intel(R) Core(TM) i3-4010Y CPU @ 1.30GHz (fam: 06, model: 45, stepping: 01)
[ 0.186061] TSC deadline timer enabled
[ 0.186084] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.186103] ... version: 3
[ 0.186106] ... bit width: 48
[ 0.186108] ... generic registers: 4
[ 0.186112] ... value mask: 0000ffffffffffff
[ 0.186115] ... max period: 0000ffffffffffff
[ 0.186117] ... fixed-purpose events: 3
[ 0.186120] ... event mask: 000000070000000f
[ 0.190855] x86: Booting SMP configuration:
[ 0.190860] .... node #0, CPUs: #1
[ 0.207187] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.207417] #2 #3
[ 0.239228] x86: Booted up 1 node, 4 CPUs
[ 0.239238] smpboot: Total of 4 processors activated (10376.02 BogoMIPS)
[ 0.250909] devtmpfs: initialized
[ 0.261438] evm: security.selinux
[ 0.261442] evm: security.SMACK64
[ 0.261445] evm: security.ima
[ 0.261447] evm: security.capability
[ 0.261581] PM: Registering ACPI NVS region [mem 0x92eaf000-0x92faefff] (1048576 bytes)
[ 0.263903] pinctrl core: initialized pinctrl subsystem
[ 0.264078] regulator-dummy: no parameters
[ 0.264135] RTC time: 10:23:39, date: 04/26/14
[ 0.264242] NET: Registered protocol family 16
[ 0.264554] cpuidle: using governor ladder
[ 0.264558] cpuidle: using governor menu
[ 0.264666] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.264670] ACPI: bus type PCI registered
[ 0.264674] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.264832] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.264839] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.337564] PCI: Using configuration type 1 for base access
[ 0.341602] ACPI: Added _OSI(Module Device)
[ 0.341609] ACPI: Added _OSI(Processor Device)
[ 0.341612] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.341616] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.351789] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.361295] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.366933] ACPI: SSDT 0x0000000092E71C18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816)
[ 0.368218] ACPI: Dynamic OEM Table Load:
[ 0.368224] ACPI: SSDT 0x0000000000000000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816)
[ 0.371290] ACPI: SSDT 0x0000000092E71618 0005AA (v01 PmRef ApIst 00003000 INTL 20120816)
[ 0.373131] ACPI: Dynamic OEM Table Load:
[ 0.373137] ACPI: SSDT 0x0000000000000000 0005AA (v01 PmRef ApIst 00003000 INTL 20120816)
[ 0.374855] ACPI: SSDT 0x0000000092E69D98 000119 (v01 PmRef ApCst 00003000 INTL 20120816)
[ 0.376151] ACPI: Dynamic OEM Table Load:
[ 0.376156] ACPI: SSDT 0x0000000000000000 000119 (v01 PmRef ApCst 00003000 INTL 20120816)
[ 1.393516] ACPI: Interpreter enabled
[ 1.393542] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
[ 1.393562] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[ 1.393617] ACPI: (supports S0 S3 S4 S5)
[ 1.393621] ACPI: Using IOAPIC for interrupt routing
[ 1.393704] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.396976] acpi HPQC0003:00: ACPI dock station (docks/bays count: 1)
[ 1.410418] ACPI: \_PR_.CPU4: failed to get CPU APIC ID.
[ 1.410430] ACPI: \_PR_.CPU5: failed to get CPU APIC ID.
[ 1.410439] ACPI: \_PR_.CPU6: failed to get CPU APIC ID.
[ 1.410448] ACPI: \_PR_.CPU7: failed to get CPU APIC ID.
[ 1.411782] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 1.411796] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 1.412005] \_SB_.PCI0:_OSC invalid UUID
[ 1.412008] _OSC request data:1 1f 0
[ 1.412019] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 1.413477] PCI host bridge to bus 0000:00
[ 1.413486] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 1.413491] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.413496] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.413501] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.413506] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 1.413510] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 1.413515] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 1.413519] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 1.413524] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 1.413528] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 1.413533] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 1.413537] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 1.413542] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[ 1.413564] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 1.413912] pci 0000:00:02.0: [8086:0a1e] type 00 class 0x030000
[ 1.413946] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff 64bit]
[ 1.413966] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 1.413980] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 1.414317] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 1.414340] pci 0000:00:03.0: reg 0x10: [mem 0xb0610000-0xb0613fff 64bit]
[ 1.414724] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 1.414759] pci 0000:00:14.0: reg 0x10: [mem 0xb0600000-0xb060ffff 64bit]
[ 1.414870] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 1.415069] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 1.415176] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 1.415214] pci 0000:00:16.0: reg 0x10: [mem 0xb0618000-0xb061801f 64bit]
[ 1.415334] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.415639] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 1.415666] pci 0000:00:1b.0: reg 0x10: [mem 0xb0614000-0xb0617fff 64bit]
[ 1.415789] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.416074] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 1.416206] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.416421] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 1.416519] pci 0000:00:1c.1: [8086:9c12] type 01 class 0x060400
[ 1.416640] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.416842] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 1.416940] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[ 1.417059] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.417262] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 1.417376] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 1.417413] pci 0000:00:1d.0: reg 0x10: [mem 0xb061c000-0xb061c3ff]
[ 1.417563] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.417793] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1.417893] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 1.418328] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 1.418359] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
[ 1.418374] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
[ 1.418390] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
[ 1.418405] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
[ 1.418420] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 1.418435] pci 0000:00:1f.2: reg 0x24: [mem 0xb061b000-0xb061b7ff]
[ 1.418507] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.418782] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 1.418810] pci 0000:00:1f.3: reg 0x10: [mem 0xb0619000-0xb06190ff 64bit]
[ 1.418847] pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f]
[ 1.419233] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.419467] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
[ 1.419537] pci 0000:02:00.0: reg 0x10: [mem 0xb0500000-0xb0500fff]
[ 1.420054] pci 0000:02:00.0: supports D1 D2
[ 1.420059] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 1.428264] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 1.428276] pci 0000:00:1c.1: bridge window [mem 0xb0500000-0xb05fffff]
[ 1.428432] pci 0000:03:00.0: [1814:3290] type 00 class 0x028000
[ 1.428459] pci 0000:03:00.0: reg 0x10: [mem 0xb0410000-0xb041ffff]
[ 1.428656] pci 0000:03:00.0: PME# supported from D0 D3hot
[ 1.428808] pci 0000:03:00.1: [1814:3298] type 00 class 0x0d1100
[ 1.428834] pci 0000:03:00.1: reg 0x10: [mem 0xb0400000-0xb040ffff]
[ 1.429030] pci 0000:03:00.1: supports D1
[ 1.429034] pci 0000:03:00.1: PME# supported from D0 D1 D3hot
[ 1.440280] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 1.440291] pci 0000:00:1c.2: bridge window [mem 0xb0400000-0xb04fffff]
[ 1.441192] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.441316] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.441438] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.441552] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.441665] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.441778] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.441891] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.442003] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.442334] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 1.442469] ACPI : EC: GPE = 0x8, I/O: command/status = 0x66, data = 0x62
[ 1.442756] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.442766] vgaarb: loaded
[ 1.442769] vgaarb: bridge control possible 0000:00:02.0
[ 1.443284] SCSI subsystem initialized
[ 1.443408] libata version 3.00 loaded.
[ 1.443470] ACPI: bus type USB registered
[ 1.443517] usbcore: registered new interface driver usbfs
[ 1.443540] usbcore: registered new interface driver hub
[ 1.443602] usbcore: registered new device driver usb
[ 1.444041] PCI: Using ACPI for IRQ routing
[ 1.454173] PCI: pci_cache_line_size set to 64 bytes
[ 1.454266] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[ 1.454270] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 1.454274] e820: reserve RAM buffer [mem 0x9269f000-0x93ffffff]
[ 1.454279] e820: reserve RAM buffer [mem 0x93000000-0x93ffffff]
[ 1.454283] e820: reserve RAM buffer [mem 0x15f600000-0x15fffffff]
[ 1.454527] NetLabel: Initializing
[ 1.454531] NetLabel: domain hash size = 128
[ 1.454533] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.454566] NetLabel: unlabeled traffic allowed by default
[ 1.454719] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.454734] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.456814] Switched to clocksource hpet
[ 1.472408] AppArmor: AppArmor Filesystem Enabled
[ 1.472467] pnp: PnP ACPI init
[ 1.472503] ACPI: bus type PNP registered
[ 1.473605] pnp 00:00: [dma 4]
[ 1.473682] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.473744] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.474019] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.474184] system 00:03: [io 0x0680-0x069f] has been reserved
[ 1.474191] system 00:03: [io 0xffff] has been reserved
[ 1.474196] system 00:03: [io 0xffff] has been reserved
[ 1.474206] system 00:03: [io 0xffff] has been reserved
[ 1.474212] system 00:03: [io 0x1800-0x18fe] could not be reserved
[ 1.474217] system 00:03: [io 0x164e-0x164f] has been reserved
[ 1.474222] system 00:03: [io 0x0454-0x0457] has been reserved
[ 1.474227] system 00:03: [io 0x0380-0x0387] has been reserved
[ 1.474235] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.474358] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.474462] pnp 00:05: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 1.475121] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.475127] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.475132] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.475137] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.475143] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.475148] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.475153] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.475159] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.475164] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.475169] system 00:06: [mem 0x9fa22000-0x9fa22fff] has been reserved
[ 1.475174] system 00:06: [mem 0x9fa10000-0x9fa1ffff] has been reserved
[ 1.475181] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.475759] pnp 00:07: Plug and Play ACPI device, IDs INTcfd9 PNP0c40 (active)
[ 1.475962] pnp: PnP ACPI: found 8 devices
[ 1.475966] ACPI: bus type PNP unregistered
[ 1.485385] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 1.485395] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 1.485400] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 1.485434] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 1.485440] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 1.485445] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 1.485464] pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fcfffff]
[ 1.485486] pci 0000:00:1c.0: BAR 15: assigned [mem 0x9fd00000-0x9fefffff 64bit pref]
[ 1.485494] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 1.485501] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.485507] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 1.485517] pci 0000:00:1c.0: bridge window [mem 0x9fb00000-0x9fcfffff]
[ 1.485525] pci 0000:00:1c.0: bridge window [mem 0x9fd00000-0x9fefffff 64bit pref]
[ 1.485537] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 1.485547] pci 0000:00:1c.1: bridge window [mem 0xb0500000-0xb05fffff]
[ 1.485562] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 1.485571] pci 0000:00:1c.2: bridge window [mem 0xb0400000-0xb04fffff]
[ 1.485589] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.485594] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.485599] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.485603] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 1.485607] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 1.485612] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 1.485616] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 1.485621] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 1.485625] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 1.485630] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 1.485634] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 1.485639] pci_bus 0000:00: resource 15 [mem 0x9fa00000-0xfeafffff]
[ 1.485644] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 1.485648] pci_bus 0000:01: resource 1 [mem 0x9fb00000-0x9fcfffff]
[ 1.485653] pci_bus 0000:01: resource 2 [mem 0x9fd00000-0x9fefffff 64bit pref]
[ 1.485658] pci_bus 0000:02: resource 1 [mem 0xb0500000-0xb05fffff]
[ 1.485663] pci_bus 0000:03: resource 1 [mem 0xb0400000-0xb04fffff]
[ 1.485736] NET: Registered protocol family 2
[ 1.486125] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.486441] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.486862] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.486911] TCP: reno registered
[ 1.486929] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.486999] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.487161] NET: Registered protocol family 1
[ 1.487189] pci 0000:00:02.0: Boot video device
[ 1.505107] PCI: CLS 64 bytes, default 64
[ 1.505249] Trying to unpack rootfs image as initramfs...
[ 2.450428] Freeing initrd memory: 18108K (ffff880035c92000 - ffff880036e41000)
[ 2.450440] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.450447] software IO TLB [mem 0x8e20b000-0x9220b000] (64MB) mapped at [ffff88008e20b000-ffff88009220afff]
[ 2.450574] Simple Boot Flag at 0x44 set to 0x1
[ 2.451119] Scanning for low memory corruption every 60 seconds
[ 2.452032] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 2.452135] Initialise system trusted keyring
[ 2.452179] audit: initializing netlink subsys (disabled)
[ 2.452232] audit: type=2000 audit(1398507820.340:1): initialized
[ 2.542231] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.546473] zbud: loaded
[ 2.546937] VFS: Disk quotas dquot_6.5.2
[ 2.547037] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.548254] fuse init (API version 7.23)
[ 2.548483] msgmni has been set to 7448
[ 2.548632] Key type big_key registered
[ 2.553774] Key type asymmetric registered
[ 2.553780] Asymmetric key parser 'x509' registered
[ 2.553902] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.553994] io scheduler noop registered
[ 2.553999] io scheduler deadline registered (default)
[ 2.554086] io scheduler cfq registered
[ 2.554256] pcieport 0000:00:1c.0: device [8086:9c10] has invalid IRQ; check vendor BIOS
[ 2.554602] pcieport 0000:00:1c.1: device [8086:9c12] has invalid IRQ; check vendor BIOS
[ 2.554888] pcieport 0000:00:1c.2: device [8086:9c14] has invalid IRQ; check vendor BIOS
[ 2.555206] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.555248] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.555384] efifb: probing for efifb
[ 2.556707] efifb: framebuffer at 0xa0000000, mapped to 0xffffc90010800000, using 4160k, total 4160k
[ 2.556712] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 2.556715] efifb: scrolling: redraw
[ 2.556720] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.648404] Console: switching to colour frame buffer device 170x48
[ 2.654938] fb0: EFI VGA frame buffer device
[ 2.654983] intel_idle: MWAIT substates: 0x11142120
[ 2.654987] intel_idle: v0.4 model 0x45
[ 2.654990] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.656200] ACPI: AC Adapter [ACAD] (on-line)
[ 2.656551] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 2.657072] ACPI: Lid Switch [LID0]
[ 2.657188] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 2.657197] ACPI: Power Button [PWRB]
[ 2.657325] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 2.657332] ACPI: Power Button [PWRF]
[ 2.658991] [Firmware Bug]: Invalid critical threshold (0)
[ 2.660622] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.660628] ACPI: Thermal Zone [TZ01] (51 C)
[ 2.660693] GHES: HEST is not enabled!
[ 2.660918] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.665949] Linux agpgart interface v0.103
[ 2.669642] brd: module loaded
[ 2.671432] loop: module loaded
[ 2.672451] libphy: Fixed MDIO Bus: probed
[ 2.672709] tun: Universal TUN/TAP device driver, 1.6
[ 2.672713] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 2.672849] PPP generic driver version 2.4.2
[ 2.672959] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.672977] ehci-pci: EHCI PCI platform driver
[ 2.673272] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.673287] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.673310] ehci-pci 0000:00:1d.0: debug port 2
[ 2.677248] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.677281] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb061c000
[ 2.685586] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.685701] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.685706] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.685711] usb usb1: Product: EHCI Host Controller
[ 2.685715] usb usb1: Manufacturer: Linux 3.15.0-031500rc2-generic ehci_hcd
[ 2.685719] usb usb1: SerialNumber: 0000:00:1d.0
[ 2.686091] hub 1-0:1.0: USB hub found
[ 2.686109] hub 1-0:1.0: 2 ports detected
[ 2.686442] ehci-platform: EHCI generic platform driver
[ 2.686463] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.686472] ohci-pci: OHCI PCI platform driver
[ 2.686496] ohci-platform: OHCI generic platform driver
[ 2.686512] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.686825] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.686838] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.686966] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.687004] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
[ 2.687137] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.687142] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.687146] usb usb2: Product: xHCI Host Controller
[ 2.687151] usb usb2: Manufacturer: Linux 3.15.0-031500rc2-generic xhci_hcd
[ 2.687155] usb usb2: SerialNumber: 0000:00:14.0
[ 2.687483] hub 2-0:1.0: USB hub found
[ 2.687506] hub 2-0:1.0: 9 ports detected
[ 2.689223] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.689233] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 2.689323] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.689328] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.689332] usb usb3: Product: xHCI Host Controller
[ 2.689337] usb usb3: Manufacturer: Linux 3.15.0-031500rc2-generic xhci_hcd
[ 2.689341] usb usb3: SerialNumber: 0000:00:14.0
[ 2.689702] hub 3-0:1.0: USB hub found
[ 2.689722] hub 3-0:1.0: 4 ports detected
[ 2.690419] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.690424] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.692980] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.693305] mousedev: PS/2 mouse device common for all mice
[ 2.693874] rtc_cmos 00:04: RTC can wake from S4
[ 2.694136] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.694178] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.694380] device-mapper: uevent: version 1.0.3
[ 2.694587] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@xxxxxxxxxx
[ 2.694605] Intel P-state driver initializing.
[ 2.694639] Intel pstate controlling: cpu 0
[ 2.694703] Intel pstate controlling: cpu 1
[ 2.694762] Intel pstate controlling: cpu 2
[ 2.694805] Intel pstate controlling: cpu 3
[ 2.694877] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.694881] EFI Variables Facility v0.08 2004-May-17
[ 2.701851] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.733031] ACPI: Battery Slot [BAT0] (battery present)
[ 2.735463] TCP: cubic registered
[ 2.735737] NET: Registered protocol family 10
[ 2.736254] NET: Registered protocol family 17
[ 2.736270] Key type dns_resolver registered
[ 2.736840] Loading compiled-in X.509 certificates
[ 2.738187] Loaded X.509 cert 'Magrathea: Glacier signing key: 81314a811b2b8daa6ebd18b7a67b08837b33793b'
[ 2.738209] registered taskstats version 1
[ 2.741161] Key type trusted registered
[ 2.743672] Key type encrypted registered
[ 2.746252] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.746258] ima: No TPM chip found, activating TPM-bypass!
[ 2.746845] Magic number: 10:822:376
[ 2.746954] rtc_cmos 00:04: setting system clock to 2014-04-26 10:23:41 UTC (1398507821)
[ 2.747028] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.747032] EDD information not available.
[ 2.747124] PM: Hibernation image not present or could not be loaded.
[ 2.997844] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 3.130275] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
[ 3.130284] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.130721] hub 1-1:1.0: USB hub found
[ 3.130926] hub 1-1:1.0: 8 ports detected
[ 3.293155] ACPI: Battery Slot [BAT1] (battery present)
[ 3.295528] Freeing unused kernel memory: 1356K (ffffffff81d20000 - ffffffff81e73000)
[ 3.295532] Write protecting the kernel read-only data: 12288k
[ 3.297785] Freeing unused kernel memory: 524K (ffff88000277d000 - ffff880002800000)
[ 3.297993] usb 2-3: new high-speed USB device number 2 using xhci_hcd
[ 3.299666] Freeing unused kernel memory: 472K (ffff880002b8a000 - ffff880002c00000)
[ 3.321599] systemd-udevd[126]: starting version 204
[ 3.356076] rtsx_pci 0000:02:00.0: irq 57 for MSI/MSI-X
[ 3.356117] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 57
[ 3.359265] ahci 0000:00:1f.2: version 3.0
[ 3.359462] ahci 0000:00:1f.2: irq 58 for MSI/MSI-X
[ 3.359509] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[ 3.359513] ahci 0000:00:1f.2: flags: 64bit ncq ilck pm led clo only pio slum part deso sadm sds apst
[ 3.360455] scsi0 : ahci
[ 3.360644] scsi1 : ahci
[ 3.360792] scsi2 : ahci
[ 3.360935] scsi3 : ahci
[ 3.361016] ata1: SATA max UDMA/133 abar m2048@0xb061b000 port 0xb061b100 irq 58
[ 3.361019] ata2: SATA max UDMA/133 abar m2048@0xb061b000 port 0xb061b180 irq 58
[ 3.361021] ata3: DUMMY
[ 3.361022] ata4: DUMMY
[ 3.450144] tsc: Refined TSC clocksource calibration: 1296.997 MHz
[ 3.454355] rtsx_pci: probe of 0000:02:00.0 failed with error -110
[ 3.500570] usb 2-3: New USB device found, idVendor=1bcf, idProduct=2c40
[ 3.500579] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.500584] usb 2-3: Product: HP TrueVision Full HD
[ 3.500588] usb 2-3: Manufacturer: DDNKQ019I5A8HS
[ 3.670338] usb 2-5: new full-speed USB device number 3 using xhci_hcd
[ 3.678292] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.678327] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.679741] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 3.679751] ata1.00: ATA-9: SAMSUNG MZMTD128HAFV-000H1, DXT41H0Q, max UDMA/133
[ 3.679758] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.680394] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 3.680535] ata1.00: configured for UDMA/133
[ 3.680877] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZMTD128 DXT4 PQ: 0 ANSI: 5
[ 3.681494] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 3.681605] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.681667] sd 0:0:0:0: [sda] Write Protect is off
[ 3.681677] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.681775] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.684019] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 3.686236] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.737099] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 3.800006] usb 2-5: New USB device found, idVendor=0483, idProduct=91d1
[ 3.800016] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.800020] usb 2-5: Product: ST_SENSOR_HUB
[ 3.800024] usb 2-5: Manufacturer: STMicroelectronics
[ 3.800028] usb 2-5: SerialNumber: ST_SENSOR_HUB
[ 3.966543] usb 2-6: new full-speed USB device number 4 using xhci_hcd
[ 4.078636] usb 2-6: device descriptor read/64, error -71
[ 4.182641] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
[ 4.182726] usb 2-6: hub failed to enable device, error -22
[ 4.294727] usb 2-6: new full-speed USB device number 5 using xhci_hcd
[ 4.406874] usb 2-6: device descriptor read/64, error -71
[ 4.450973] Switched to clocksource tsc
[ 4.510833] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
[ 4.510919] usb 2-6: hub failed to enable device, error -22
[ 4.622881] usb 2-6: new full-speed USB device number 6 using xhci_hcd
[ 4.623071] usb 2-6: Device not responding to setup address.
[ 4.827155] usb 2-6: Device not responding to setup address.
[ 5.031131] usb 2-6: device not accepting address 6, error -71
[ 5.143234] usb 2-6: new full-speed USB device number 7 using xhci_hcd
[ 5.143419] usb 2-6: Device not responding to setup address.
[ 5.347471] usb 2-6: Device not responding to setup address.
[ 5.551425] usb 2-6: device not accepting address 7, error -71
[ 5.551541] hub 2-0:1.0: unable to enumerate USB device on port 6
[ 5.663519] usb 2-8: new full-speed USB device number 8 using xhci_hcd
[ 10.795846] usb 2-8: New USB device found, idVendor=04f3, idProduct=0117
[ 10.795856] usb 2-8: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ 10.795860] usb 2-8: Product: Touchscreen
[ 10.795864] usb 2-8: Manufacturer: ELAN
[ 10.796154] usb 2-8: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 10.839490] random: nonblocking pool is initialized
[ 10.916652] init: plymouth-upstart-bridge main process (190) terminated with status 1
[ 10.916684] init: plymouth-upstart-bridge main process ended, respawning
[ 10.928193] init: plymouth-upstart-bridge main process (200) terminated with status 1
[ 10.928220] init: plymouth-upstart-bridge main process ended, respawning
[ 10.936471] init: plymouth-upstart-bridge main process (203) terminated with status 1
[ 10.936509] init: plymouth-upstart-bridge main process ended, respawning
[ 10.951231] init: ureadahead main process (193) terminated with status 5
[ 11.133040] Adding 3906556k swap on /dev/sda7. Priority:-1 extents:1 across:3906556k SSFS
[ 11.221848] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[ 11.233687] systemd-udevd[325]: starting version 204
[ 11.333808] lp: driver loaded but no devices found
[ 11.364979] ppdev: user-space parallel port driver
[ 11.373574] mei_me 0000:00:16.0: irq 57 for MSI/MSI-X
[ 11.395990] Initializing HPQ6001 module
[ 11.396243] input: HP Wireless hotkeys as /devices/virtual/input/input4
[ 11.404115] wmi: Mapper loaded
[ 11.462792] [drm] Initialized drm 1.1.0 20060810
[ 11.515324] cfg80211: Calling CRDA to update world regulatory domain
[ 11.568482] hidraw: raw HID events driver (C) Jiri Kosina
[ 11.571601] Linux video capture interface: v2.00
[ 11.595262] usbcore: registered new interface driver usbhid
[ 11.595267] usbhid: USB HID core driver
[ 11.598186] uvcvideo: Found UVC 1.00 device HP TrueVision Full HD (1bcf:2c40)
[ 11.599724] [drm] Memory usable by graphics device = 2048M
[ 11.599732] checking generic (a0000000 410000) vs hw (a0000000 10000000)
[ 11.599735] fb: switching to inteldrmfb from EFI VGA
[ 11.599778] Console: switching to colour dummy device 80x25
[ 11.654607] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected
[ 11.678612] input: HP TrueVision Full HD as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/input/input5
[ 11.679330] usbcore: registered new interface driver uvcvideo
[ 11.679336] USB Video Class driver (1.1.1)
[ 11.682341] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected
[ 11.684550] i915 0000:00:02.0: irq 59 for MSI/MSI-X
[ 11.684571] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.684573] [drm] Driver supports precise vblank timestamp query.
[ 11.684620] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 11.699919] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.741179] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x14
[ 11.743458] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x14
[ 11.743684] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x14
[ 11.743711] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x14
[ 11.744063] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 11.841957] AVX2 version of gcm_enc/dec engaged.
[ 11.883313] fbcon: inteldrmfb (fb0) is primary device
[ 11.927334] Bluetooth: Core ver 2.19
[ 11.927371] NET: Registered protocol family 31
[ 11.927372] Bluetooth: HCI device and connection manager initialized
[ 11.927382] Bluetooth: HCI socket layer initialized
[ 11.927386] Bluetooth: L2CAP socket layer initialized
[ 11.927400] Bluetooth: SCO socket layer initialized
[ 11.946669] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.946671] Bluetooth: BNEP filters: protocol multicast
[ 11.946682] Bluetooth: BNEP socket layer initialized
[ 12.094167] input: HP WMI hotkeys as /devices/virtual/input/input6
[ 12.099163] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/0003:04F3:0117.0002/input/input7
[ 12.100037] hid-multitouch 0003:04F3:0117.0002: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-8/input0
[ 12.102489] cfg80211: World regulatory domain updated:
[ 12.102492] cfg80211: DFS Master region: unset
[ 12.102493] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 12.102497] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 12.102500] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 12.102503] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 12.102505] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 12.102508] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 12.932095] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 13.003949] Console: switching to colour frame buffer device 170x48
[ 13.010569] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 13.010571] i915 0000:00:02.0: registered panic notifier
[ 13.013509] Bluetooth: RFCOMM TTY layer initialized
[ 13.013526] Bluetooth: RFCOMM socket layer initialized
[ 13.013534] Bluetooth: RFCOMM ver 1.11
[ 13.024635] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 13.025843] acpi device:2d: registered as cooling_device5
[ 13.026218] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 13.026496] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 13.029592] snd_hda_intel 0000:00:1b.0: irq 60 for MSI/MSI-X
[ 13.048076] snd_hda_intel 0000:00:03.0: irq 61 for MSI/MSI-X
[ 13.068616] sound hdaudioC1D0: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 13.068625] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 13.068631] sound hdaudioC1D0: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[ 13.068635] sound hdaudioC1D0: mono: mono_out=0x0
[ 13.068639] sound hdaudioC1D0: inputs:
[ 13.068644] sound hdaudioC1D0: Internal Mic=0xe
[ 13.068649] sound hdaudioC1D0: Mic=0xb
[ 13.080394] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 13.080614] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 13.080818] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 13.081553] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 13.081782] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 13.187450] init: avahi-cups-reload main process (629) terminated with status 1
[ 13.189783] init: udev-fallback-graphics main process (636) terminated with status 1
[ 13.661986] audit: type=1400 audit(1398522232.404:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=641 comm="apparmor_parser"
[ 13.662323] audit: type=1400 audit(1398522232.404:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=641 comm="apparmor_parser"
[ 13.662567] audit: type=1400 audit(1398522232.404:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=641 comm="apparmor_parser"
[ 14.065813] audit: type=1400 audit(1398522232.808:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=612 comm="apparmor_parser"
[ 14.066416] audit: type=1400 audit(1398522232.808:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=612 comm="apparmor_parser"
[ 14.104392] audit: type=1400 audit(1398522232.844:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=841 comm="apparmor_parser"
[ 14.104406] audit: type=1400 audit(1398522232.844:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=841 comm="apparmor_parser"
[ 14.104415] audit: type=1400 audit(1398522232.844:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=841 comm="apparmor_parser"
[ 14.108656] audit: type=1400 audit(1398522232.852:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=841 comm="apparmor_parser"
[ 14.108671] audit: type=1400 audit(1398522232.852:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=841 comm="apparmor_parser"
[ 14.243817] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
[ 14.244694] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
[ 14.292906] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.470620] wlan0: authenticate with 64:70:02:e2:9b:99
[ 16.486171] wlan0: send auth to 64:70:02:e2:9b:99 (try 1/3)
[ 16.487886] wlan0: authenticated
[ 16.490064] wlan0: associate with 64:70:02:e2:9b:99 (try 1/3)
[ 16.493264] wlan0: RX AssocResp from 64:70:02:e2:9b:99 (capab=0x431 status=0 aid=5)
[ 16.493343] wlan0: associated
[ 16.493378] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 16.493457] cfg80211: Calling CRDA for country: CA
[ 16.497263] cfg80211: Regulatory domain changed to country: CA
[ 16.497268] cfg80211: DFS Master region: unset
[ 16.497270] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 16.497274] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A)
[ 16.497277] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (N/A)
[ 16.497280] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
[ 16.497282] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
[ 16.497284] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A)
[ 19.221157] audit_printk_skb: 51 callbacks suppressed
[ 19.221162] audit: type=1400 audit(1398522237.960:29): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=842 comm="apparmor_parser"
[ 19.221695] audit: type=1400 audit(1398522237.960:30): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=842 comm="apparmor_parser"
[ 19.222578] audit: type=1400 audit(1398522237.960:31): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=842 comm="apparmor_parser"
[ 19.222882] audit: type=1400 audit(1398522237.960:32): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=842 comm="apparmor_parser"
[ 19.223467] audit: type=1400 audit(1398522237.960:33): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=842 comm="apparmor_parser"
[ 19.223744] audit: type=1400 audit(1398522237.964:34): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=842 comm="apparmor_parser"
[ 19.855249] init: plymouth-upstart-bridge main process ended, respawning
[ 19.865666] init: plymouth-upstart-bridge main process (1196) terminated with status 1
[ 19.865684] init: plymouth-upstart-bridge main process ended, respawning
[ 21.529135] ahci 0000:00:1f.2: port does not support device sleep
[ 134.442718] audit: type=1400 audit(1398522353.058:35): apparmor="STATUS" operation="profile_replace" name="/usr/lib/lightdm/lightdm-guest-session" pid=1823 comm="apparmor_parser"
[ 134.456626] audit: type=1400 audit(1398522353.078:36): apparmor="STATUS" operation="profile_replace" name="chromium" pid=1823 comm="apparmor_parser"
[ 134.456701] audit: type=1400 audit(1398522353.078:37): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1824 comm="apparmor_parser"
[ 134.456723] audit: type=1400 audit(1398522353.078:38): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1824 comm="apparmor_parser"
[ 134.456736] audit: type=1400 audit(1398522353.078:39): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1824 comm="apparmor_parser"
[ 134.456784] audit: type=1400 audit(1398522353.078:40): apparmor="STATUS" operation="profile_replace" name="/usr/lib/telepathy/mission-control-5" pid=1827 comm="apparmor_parser"
[ 134.456802] audit: type=1400 audit(1398522353.078:41): apparmor="STATUS" operation="profile_replace" name="/usr/lib/telepathy/telepathy-*" pid=1827 comm="apparmor_parser"
[ 134.476589] audit: type=1400 audit(1398522353.098:42): apparmor="STATUS" operation="profile_replace" name="pxgsettings" pid=1827 comm="apparmor_parser"
[ 134.476613] audit: type=1400 audit(1398522353.098:43): apparmor="STATUS" operation="profile_replace" name="sanitized_helper" pid=1827 comm="apparmor_parser"
[ 134.476623] audit: type=1400 audit(1398522353.098:44): apparmor="STATUS" operation="profile_replace" name="/usr/lib/telepathy/telepathy-ofono" pid=1827 comm="apparmor_parser"
[ 134.789402] init: plymouth-stop pre-start process (1948) terminated with status 1
00000000-00000fff : reserved
00001000-0006efff : System RAM
0006f000-0006ffff : reserved
00070000-00087fff : System RAM
00088000-000bffff : reserved
000a0000-000bffff : PCI Bus 0000:00
000c0000-000c3fff : PCI Bus 0000:00
000c4000-000c7fff : PCI Bus 0000:00
000c8000-000cbfff : PCI Bus 0000:00
000cc000-000cffff : PCI Bus 0000:00
000d0000-000d3fff : PCI Bus 0000:00
000d4000-000d7fff : PCI Bus 0000:00
000d8000-000dbfff : PCI Bus 0000:00
000dc000-000dffff : PCI Bus 0000:00
000f0000-000fffff : System ROM
00100000-9269efff : System RAM
02000000-0277ad18 : Kernel code
0277ad19-02d1ed3f : Kernel data
02e7b000-02fe0fff : Kernel bss
9269f000-9289efff : reserved
9289f000-92eaefff : reserved
92eaf000-92faefff : ACPI Non-volatile Storage
92faf000-92ffefff : ACPI Tables
92fff000-92ffffff : System RAM
93000000-9f9fffff : reserved
9da00000-9f9fffff : Graphics Stolen Memory
9fa00000-feafffff : PCI Bus 0000:00
9fa10000-9fa1ffff : pnp 00:06
9fa22000-9fa22fff : pnp 00:06
9fb00000-9fcfffff : PCI Bus 0000:01
9fd00000-9fefffff : PCI Bus 0000:01
a0000000-afffffff : 0000:00:02.0
b0000000-b03fffff : 0000:00:02.0
b0400000-b04fffff : PCI Bus 0000:03
b0400000-b040ffff : 0000:03:00.1
b0410000-b041ffff : 0000:03:00.0
b0410000-b041ffff : 0000:03:00.0
b0500000-b05fffff : PCI Bus 0000:02
b0500000-b0500fff : 0000:02:00.0
b0600000-b060ffff : 0000:00:14.0
b0600000-b060ffff : xhci_hcd
b0610000-b0613fff : 0000:00:03.0
b0610000-b0613fff : ICH HD audio
b0614000-b0617fff : 0000:00:1b.0
b0614000-b0617fff : ICH HD audio
b0618000-b061801f : 0000:00:16.0
b0618000-b061801f : mei_me
b0619000-b06190ff : 0000:00:1f.3
b061b000-b061b7ff : 0000:00:1f.2
b061b000-b061b7ff : ahci
b061c000-b061c3ff : 0000:00:1d.0
b061c000-b061c3ff : ehci_hcd
e0000000-efffffff : PCI MMCONFIG 0000 [bus 00-ff]
e0000000-efffffff : reserved
e0000000-efffffff : pnp 00:06
fe101000-fe112fff : reserved
feb00000-feb0ffff : reserved
fec00000-fec00fff : reserved
fec00000-fec003ff : IOAPIC 0
fed00000-fee00fff : reserved
fed00000-fed003ff : HPET 0
fed10000-fed17fff : pnp 00:06
fed18000-fed18fff : pnp 00:06
fed19000-fed19fff : pnp 00:06
fed1c000-fed1ffff : pnp 00:06
fed1f410-fed1f414 : iTCO_wdt
fed20000-fed3ffff : pnp 00:06
fed90000-fed93fff : pnp 00:06
fee00000-fee00fff : Local APIC
ffb00000-ffffffff : reserved
100000000-15f5fffff : System RAM
15f600000-15fffffff : RAM buffer
0000-0cf7 : PCI Bus 0000:00
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0062-0062 : EC data
0064-0064 : keyboard
0066-0066 : EC cmd
0070-0077 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0380-0387 : pnp 00:03
0454-0457 : pnp 00:03
0680-069f : pnp 00:03
0cf8-0cff : PCI conf1
0d00-ffff : PCI Bus 0000:00
164e-164f : pnp 00:03
1800-1803 : ACPI PM1a_EVT_BLK
1804-1805 : ACPI PM1a_CNT_BLK
1808-180b : ACPI PM_TMR
1810-1815 : ACPI CPU throttle
1830-1833 : iTCO_wdt
1850-1850 : ACPI PM2_CNT_BLK
1860-187f : iTCO_wdt
1880-189f : ACPI GPE0_BLK
2000-2fff : PCI Bus 0000:01
3000-303f : 0000:00:02.0
3040-305f : 0000:00:1f.3
3060-307f : 0000:00:1f.2
3060-307f : ahci
3080-3087 : 0000:00:1f.2
3080-3087 : ahci
3088-308f : 0000:00:1f.2
3088-308f : ahci
3090-3093 : 0000:00:1f.2
3090-3093 : ahci
3094-3097 : 0000:00:1f.2
3094-3097 : ahci
ffff-ffff : pnp 00:03
ffff-ffff : pnp 00:03
ffff-ffff : pnp 00:03
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09)
Subsystem: Hewlett-Packard Company Device 215b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:02.0 VGA compatible controller: Intel Corporation Device 0a1e (rev 09) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 215b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 59
Region 0: Memory at b0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at a0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 3000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 4162
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: i915

00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
Subsystem: Hewlett-Packard Company Device 215b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 60
Region 0: Memory at b0610000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D3 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 4182
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
Kernel driver in use: snd_hda_intel

00:14.0 USB controller: Intel Corporation Lynx Point-LP USB xHCI HC (rev 04) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company Device 215b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 56
Region 0: Memory at b0600000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
Address: 00000000fee0c00c Data: 41d1
Kernel driver in use: xhci_hcd

00:16.0 Communication controller: Intel Corporation Lynx Point-LP HECI #0 (rev 04)
Subsystem: Hewlett-Packard Company Device 215b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 57
Region 0: Memory at b0618000 (64-bit, non-prefetchable) [size=32]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 4152
Kernel driver in use: mei_me

00:1b.0 Audio device: Intel Corporation Lynx Point-LP HD Audio Controller (rev 04)
Subsystem: Hewlett-Packard Company Device 215b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 61
Region 0: Memory at b0614000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D3 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 4192
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation Lynx Point-LP PCI Express Root Port 1 (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 9fb00000-9fcfffff
Prefetchable memory behind bridge: 000000009fd00000-000000009fefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #0, PowerLimit 0.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR+, OBFF Via WAKE# ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Hewlett-Packard Company Device 215b
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1c.1 PCI bridge: Intel Corporation Lynx Point-LP PCI Express Root Port 2 (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: b0500000-b05fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #1, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR+, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Hewlett-Packard Company Device 215b
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1c.2 PCI bridge: Intel Corporation Lynx Point-LP PCI Express Root Port 3 (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: b0400000-b04fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #2, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Hewlett-Packard Company Device 215b
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation Lynx Point-LP USB EHCI #1 (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device 215b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at b061c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci

00:1f.0 ISA bridge: Intel Corporation Lynx Point-LP LPC Controller (rev 04)
Subsystem: Hewlett-Packard Company Device 215b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich

00:1f.2 SATA controller: Intel Corporation Lynx Point-LP SATA Controller 1 [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device 215b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 58
Region 0: I/O ports at 3088 [size=8]
Region 1: I/O ports at 3094 [size=4]
Region 2: I/O ports at 3080 [size=8]
Region 3: I/O ports at 3090 [size=4]
Region 4: I/O ports at 3060 [size=32]
Region 5: Memory at b061b000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4142
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation Lynx Point-LP SMBus Controller (rev 04)
Subsystem: Hewlett-Packard Company Device 215b
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 0
Region 0: Memory at b0619000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3040 [size=32]

02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Interrupt: pin A routed to IRQ 17
Region 0: Memory at b0500000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 41e1
Capabilities: [70] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR+, OBFF Via message/WAKE#
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Device Serial Number 00-00-00-01-00-4c-e0-00
Capabilities: [150 v1] Latency Tolerance Reporting
Max snoop latency: 0ns
Max no snoop latency: 0ns
Capabilities: [158 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=60us PortTPowerOnTime=60us

03:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe
Subsystem: Hewlett-Packard Company Ralink RT3290LE 802.11bgn 1x1 Wi-Fi and Bluetooth 4.0 Combo Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at b0410000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Capabilities: [50] MSI: Enable- Count=1/32 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <128ns, L1 <2us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP+ Rollover- Timeout- NonFatalErr+
CEMsk: RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Device Serial Number 00-00-69-be-33-f2-56-80
Kernel driver in use: rt2800pci

03:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth
Subsystem: Hewlett-Packard Company Ralink RT3290LE 802.11bgn 1x1 Wi-Fi and Bluetooth 4.0 Combo Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 0
Region 0: Memory at b0400000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/32 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <128ns, L1 <2us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP+ Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Device Serial Number 00-00-6a-be-33-f2-56-80

joydev 17587 0 - Live 0x0000000000000000
uvcvideo 82299 0 - Live 0x0000000000000000
hid_sensor_incl_3d 13324 0 - Live 0x0000000000000000
hid_sensor_accel_3d 13338 0 - Live 0x0000000000000000
hid_sensor_magn_3d 13324 0 - Live 0x0000000000000000
hid_sensor_als 13230 0 - Live 0x0000000000000000
hid_sensor_gyro_3d 13324 0 - Live 0x0000000000000000
videobuf2_vmalloc 13216 1 uvcvideo, Live 0x0000000000000000
hid_multitouch 17656 0 - Live 0x0000000000000000
videobuf2_memops 13362 1 videobuf2_vmalloc, Live 0x0000000000000000
hid_sensor_trigger 12916 5 hid_sensor_incl_3d,hid_sensor_accel_3d,hid_sensor_magn_3d,hid_sensor_als,hid_sensor_gyro_3d, Live 0x0000000000000000
videobuf2_core 45435 1 uvcvideo, Live 0x0000000000000000
industrialio_triggered_buffer 12882 5 hid_sensor_incl_3d,hid_sensor_accel_3d,hid_sensor_magn_3d,hid_sensor_als,hid_sensor_gyro_3d, Live 0x0000000000000000
kfifo_buf 13432 1 industrialio_triggered_buffer, Live 0x0000000000000000
videodev 149504 2 uvcvideo,videobuf2_core, Live 0x0000000000000000
industrialio 55169 8 hid_sensor_incl_3d,hid_sensor_accel_3d,hid_sensor_magn_3d,hid_sensor_als,hid_sensor_gyro_3d,hid_sensor_trigger,industrialio_triggered_buffer,kfifo_buf, Live 0x0000000000000000
hid_generic 12559 0 - Live 0x0000000000000000
hid_sensor_iio_common 13807 5 hid_sensor_incl_3d,hid_sensor_accel_3d,hid_sensor_magn_3d,hid_sensor_als,hid_sensor_gyro_3d, Live 0x0000000000000000
hid_sensor_hub 19877 7 hid_sensor_incl_3d,hid_sensor_accel_3d,hid_sensor_magn_3d,hid_sensor_als,hid_sensor_gyro_3d,hid_sensor_trigger,hid_sensor_iio_common, Live 0x0000000000000000
usbhid 53121 0 - Live 0x0000000000000000
hid 106436 4 hid_multitouch,hid_generic,hid_sensor_hub,usbhid, Live 0x0000000000000000
ctr 13193 2 - Live 0x0000000000000000
ccm 17856 2 - Live 0x0000000000000000
snd_hda_codec_idt 59683 1 - Live 0x0000000000000000
snd_hda_codec_generic 70087 1 snd_hda_codec_idt, Live 0x0000000000000000
snd_hda_codec_hdmi 48182 1 - Live 0x0000000000000000
hp_wmi 18202 0 - Live 0x0000000000000000
sparse_keymap 13890 1 hp_wmi, Live 0x0000000000000000
intel_rapl 19238 0 - Live 0x0000000000000000
x86_pkg_temp_thermal 14312 0 - Live 0x0000000000000000
intel_powerclamp 19099 0 - Live 0x0000000000000000
coretemp 13638 0 - Live 0x0000000000000000
kvm_intel 148818 0 - Live 0x0000000000000000
kvm 463808 1 kvm_intel, Live 0x0000000000000000
crct10dif_pclmul 14268 0 - Live 0x0000000000000000
crc32_pclmul 13180 0 - Live 0x0000000000000000
ghash_clmulni_intel 13230 0 - Live 0x0000000000000000
aesni_intel 152648 4 - Live 0x0000000000000000
arc4 12573 2 - Live 0x0000000000000000
bnep 19884 2 - Live 0x0000000000000000
rfcomm 75078 0 - Live 0x0000000000000000
rt2800pci 13674 0 - Live 0x0000000000000000
aes_x86_64 17131 1 aesni_intel, Live 0x0000000000000000
bluetooth 461775 10 bnep,rfcomm, Live 0x0000000000000000
lrw 13323 1 aesni_intel, Live 0x0000000000000000
rt2800mmio 21082 1 rt2800pci, Live 0x0000000000000000
rt2800lib 95492 2 rt2800pci,rt2800mmio, Live 0x0000000000000000
gf128mul 14951 1 lrw, Live 0x0000000000000000
6lowpan_iphc 18968 1 bluetooth, Live 0x0000000000000000
glue_helper 14095 1 aesni_intel, Live 0x0000000000000000
rt2x00pci 13287 1 rt2800pci, Live 0x0000000000000000
ablk_helper 13597 1 aesni_intel, Live 0x0000000000000000
snd_seq_midi 13564 0 - Live 0x0000000000000000
rt2x00mmio 13661 2 rt2800pci,rt2800mmio, Live 0x0000000000000000
snd_seq_midi_event 14899 1 snd_seq_midi, Live 0x0000000000000000
snd_rawmidi 30865 1 snd_seq_midi, Live 0x0000000000000000
snd_hda_intel 30608 5 - Live 0x0000000000000000
cryptd 20531 3 ghash_clmulni_intel,aesni_intel,ablk_helper, Live 0x0000000000000000
snd_hda_controller 35518 1 snd_hda_intel, Live 0x0000000000000000
microcode 24391 0 - Live 0x0000000000000000
snd_hda_codec 144671 5 snd_hda_codec_idt,snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_controller, Live 0x0000000000000000
snd_hwdep 13613 1 snd_hda_codec, Live 0x0000000000000000
rt2x00lib 56125 5 rt2800pci,rt2800mmio,rt2800lib,rt2x00pci,rt2x00mmio, Live 0x0000000000000000
snd_seq 67636 2 snd_seq_midi,snd_seq_midi_event, Live 0x0000000000000000
snd_pcm 113863 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_controller,snd_hda_codec, Live 0x0000000000000000
mac80211 663883 3 rt2800lib,rt2x00pci,rt2x00lib, Live 0x0000000000000000
serio_raw 13483 0 - Live 0x0000000000000000
cfg80211 515248 2 rt2x00lib,mac80211, Live 0x0000000000000000
eeprom_93cx6 13344 1 rt2800pci, Live 0x0000000000000000
crc_ccitt 12707 1 rt2800lib, Live 0x0000000000000000
mei_me 18562 0 - Live 0x0000000000000000
lpc_ich 21176 0 - Live 0x0000000000000000
mei 87522 1 mei_me, Live 0x0000000000000000
wmi 19379 1 hp_wmi, Live 0x0000000000000000
snd_seq_device 14497 3 snd_seq_midi,snd_rawmidi,snd_seq, Live 0x0000000000000000
i915 873245 5 - Live 0x0000000000000000
snd_timer 30118 2 snd_seq,snd_pcm, Live 0x0000000000000000
drm_kms_helper 59729 1 i915, Live 0x0000000000000000
snd 74195 21 snd_hda_codec_idt,snd_hda_codec_generic,snd_hda_codec_hdmi,snd_rawmidi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_pcm,snd_seq_device,snd_timer, Live 0x0000000000000000
mac_hid 13275 0 - Live 0x0000000000000000
drm 310655 5 i915,drm_kms_helper, Live 0x0000000000000000
soc_button_array 12769 0 - Live 0x0000000000000000
video 19932 1 i915, Live 0x0000000000000000
hp_wireless 12637 0 - Live 0x0000000000000000
i2c_algo_bit 13564 1 i915, Live 0x0000000000000000
soundcore 12680 2 snd_hda_codec,snd, Live 0x0000000000000000
parport_pc 32906 0 - Live 0x0000000000000000
ppdev 17711 0 - Live 0x0000000000000000
lp 17799 0 - Live 0x0000000000000000
nls_iso8859_1 12713 1 - Live 0x0000000000000000
parport 42481 3 parport_pc,ppdev,lp, Live 0x0000000000000000
ahci 30080 3 - Live 0x0000000000000000
libahci 32191 1 ahci, Live 0x0000000000000000
rtsx_pci 51162 0 - Live 0x0000000000000000
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: SAMSUNG MZMTD128 Rev: DXT4
Type: Direct-Access ANSI SCSI revision: 05