[PATCH v2 16/18] ARM: mvebu: add USB3 controller Device Tree details for Armada 375

[Gregory CLEMENT]

This commit adds the support for the USB3 controller in the Armada 375
SoC. The following things have been taken in consideration:

 - The usb3-controller node has to be *outside* of the internal-regs{}
   node, because this device needs to access special windows.

 - The usb3-controller node has one ranges to describe the special
   window to be created but it must be done at the board level in the
   dts.

 - The usb3-controller node has two entries in the reg property, the
   first for XHCI, the second for the internal registers

Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/armada-375.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index 0e0036800071..cbe64ba9eb65 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -465,5 +465,23 @@
 			};
 
 		};
+
+		/*
+		 * On Armada 375, USB2 host controller and USB3 host
+		 * controller are incompatible. That means that in the
+		 * dts of your board, you can either select the USB2
+		 * controller: marvell,orion-ehci or the USB3
+		 * controller: marvell,armada-375-xhci, but not
+		 * both. If both controllers are selected, then the
+		 * kernel will select the USB3 by default.
+		 */
+		usb3-controller {
+			compatible = "marvell,armada-375-xhci";
+			reg = <MBUS_ID(0x05, 0x00) 0 0x20000>,
+				<MBUS_ID(0xf0, 0x01) 0x5ff80 0x80>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gateclk 16>;
+			status = "disabled";
+		};
 	};
 };
-- 
1.8.1.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/