Re: Re: [PATCH V5.1] serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers

[Yoshihiro YUNOMAE]

Hi Stephen,

Thank you for your reply.

(2014/04/17 2:04), Stephen Warren wrote:
> On 04/15/2014 08:08 PM, Yoshihiro YUNOMAE wrote:
> > > > diff --git a/drivers/tty/serial/8250/8250_core.c
> > > > b/drivers/tty/serial/8250/8250_core.c
> > >
> > > > @@ -2275,10 +2276,9 @@ serial8250_do_set_termios(struct uart_port
> > > > *port, struct ktermios *termios,
> > >
> > > >        if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) {
> > > > -        fcr = uart_config[port->type].fcr;
> > > > -        if ((baud < 2400 && !up->dma) || fifo_bug) {
> > > > -            fcr &= ~UART_FCR_TRIGGER_MASK;
> > > > -            fcr |= UART_FCR_TRIGGER_1;
> > > > +        /* NOTE: If fifo_bug is not set, a uaser can set RX_trigger. */
> > > > +        if ((baud < 2400 && !up->dma &&
> > > > +            (up->fcr == uart_config[port->type].fcr)) ||
> > > > up->fifo_bug) {
> > > > +            up->fcr &= ~UART_FCR_TRIGGER_MASK;
> > > > +            up->fcr |= UART_FCR_TRIGGER_1;
> > > >            }
> > > >        }
> > >
> > > Does the "(up->fcr == uart_config[port->type].fcr)" term prevent the
> > > user from changing the trigger level multiple times? Perhaps this is
> > > intended?
> >
> > No, this means that if a user changed FCR value before setting termios,
> > use the changed value because the user think changed value is always
> > set. But, I thought this is not straightforward and it cannot help
> > when the user want to use default FCR value.
> > Could I add FCR changed flag(user_changed_fcr) in uart_8250_port
> > structure and check the flag here?
> > Or shouldn't the driver check the user changing?
>
> Oh, I wasn't aware that the user could change FCR directly. To be
> honest, I'm not sure of the best way to resolve that kind of conflict...

OK. For simplicity, I don't implement the checking.
Even if FCR is changed here, users can change it any time, so this is
not so big problem, I think.

Thanks,
Yoshihiro YUNOMAE

--
Yoshihiro YUNOMAE
Software Platform Research Dept. Linux Technology Center
Hitachi, Ltd., Yokohama Research Laboratory
E-mail: yoshihiro.yunomae.ez@xxxxxxxxxxx


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/