[PATCH net-next v3 6/9] dp83640: correct the periodic output frequency

From: Richard Cochran
Date: Thu Mar 20 2014 - 17:25:49 EST


The phyter driver incorrectly feeds the value of the period into what
is in fact a pulse width register, resulting in the actual period
being twice the dialed value. This patch fixes the issue and renames a
variable to make the code at bit more clear.

Signed-off-by: Richard Cochran <richardcochran@xxxxxxxxx>
---
drivers/net/phy/dp83640.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index d6c1061..9e26555 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -271,7 +271,7 @@ static void periodic_output(struct dp83640_clock *clock,
{
struct dp83640_private *dp83640 = clock->chosen;
struct phy_device *phydev = dp83640->phydev;
- u32 sec, nsec, period;
+ u32 sec, nsec, pwidth;
u16 gpio, ptp_trig, trigger, val;

gpio = on ? gpio_tab[PEROUT_GPIO] : 0;
@@ -296,8 +296,9 @@ static void periodic_output(struct dp83640_clock *clock,

sec = clkreq->perout.start.sec;
nsec = clkreq->perout.start.nsec;
- period = clkreq->perout.period.sec * 1000000000UL;
- period += clkreq->perout.period.nsec;
+ pwidth = clkreq->perout.period.sec * 1000000000UL;
+ pwidth += clkreq->perout.period.nsec;
+ pwidth /= 2;

mutex_lock(&clock->extreg_lock);

@@ -310,8 +311,8 @@ static void periodic_output(struct dp83640_clock *clock,
ext_write(0, phydev, PAGE4, PTP_TDR, nsec >> 16); /* ns[31:16] */
ext_write(0, phydev, PAGE4, PTP_TDR, sec & 0xffff); /* sec[15:0] */
ext_write(0, phydev, PAGE4, PTP_TDR, sec >> 16); /* sec[31:16] */
- ext_write(0, phydev, PAGE4, PTP_TDR, period & 0xffff); /* ns[15:0] */
- ext_write(0, phydev, PAGE4, PTP_TDR, period >> 16); /* ns[31:16] */
+ ext_write(0, phydev, PAGE4, PTP_TDR, pwidth & 0xffff); /* ns[15:0] */
+ ext_write(0, phydev, PAGE4, PTP_TDR, pwidth >> 16); /* ns[31:16] */

/*enable trigger*/
val &= ~TRIG_LOAD;
--
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/