Re: Tachometer speed returned rather than absolute fan speed?

[Guenter Roeck]

On Fri, Mar 07, 2014 at 03:47:08PM +0000, Laszlo Papp wrote:
> On Fri, Mar 7, 2014 at 3:37 PM, Jean Delvare <jdelvare@xxxxxxx> wrote:
> >> > I'm quite confused. While I admit that the term "tachometer speed" is
> >> > awkward, the max6650 driver is reporting fan speeds in RPM as every
> >> > other hwmon driver. So I really have no idea what you think is wrong.
> >> > What did you think "tachometer speed" was, if not the fan speed? Does
> >> > the max6650 driver not return correct fan speeds for you?
> 
> That is some strange behavior. If I do "echo 1 > pwm1_enable; echo 0 >
> pwm1; cat fan1_input", I still see 30 for the connected fan, whereas I
> can see it stopped. Is this an expected behavior? I would expect zero
> as a user.
> 
I seem to recall that I had seen that as well, with no fan connected.
Maybe the tachometer registers always read at least '1'. I would think
it is wrong, but we'll have to understand the chip a bit better
to be able to provide a fix. Unless you already have a fix ready,
of course. I'll try to re-test tonight if I find the time.

Guenter
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/