[PATCH 9/9] powerpc/pm: support deep sleep feature on T1040

From: Chenhui Zhao
Date: Thu Mar 06 2014 - 23:58:59 EST


From: Zhao Chenhui <chenhui.zhao@xxxxxxxxxxxxx>

T1040 supports deep sleep feature, which can switch off most parts of
the SoC when it is in deep sleep mode. This way, it becomes more
energy-efficient.

The DDR controller will also be powered off in deep sleep. Therefore,
the last stage (the latter part of fsl_dp_enter_low) will run without DDR
access. This piece of code and related TLBs will be prefetched.

Due to the different initialization code between 32-bit and 64-bit, they
have seperate resume entry and precedure.

The feature supports 32-bit and 64-bit kernel mode.

Signed-off-by: Zhao Chenhui <chenhui.zhao@xxxxxxxxxxxxx>
---
arch/powerpc/include/asm/booke_save_regs.h | 3 +
arch/powerpc/kernel/cpu_setup_fsl_booke.S | 17 ++
arch/powerpc/kernel/head_fsl_booke.S | 30 +++
arch/powerpc/platforms/85xx/Makefile | 2 +-
arch/powerpc/platforms/85xx/deepsleep.c | 201 +++++++++++++++++++
arch/powerpc/platforms/85xx/qoriq_pm.c | 38 ++++
arch/powerpc/platforms/85xx/sleep.S | 295 ++++++++++++++++++++++++++++
arch/powerpc/sysdev/fsl_soc.h | 7 +
8 files changed, 592 insertions(+), 1 deletions(-)
create mode 100644 arch/powerpc/platforms/85xx/deepsleep.c
create mode 100644 arch/powerpc/platforms/85xx/sleep.S

diff --git a/arch/powerpc/include/asm/booke_save_regs.h b/arch/powerpc/include/asm/booke_save_regs.h
index 87c357a..37c1f6c 100644
--- a/arch/powerpc/include/asm/booke_save_regs.h
+++ b/arch/powerpc/include/asm/booke_save_regs.h
@@ -88,6 +88,9 @@
#define HIBERNATION_FLAG 1
#define DEEPSLEEP_FLAG 2

+#define CPLD_FLAG 1
+#define FPGA_FLAG 2
+
#ifndef __ASSEMBLY__
extern void booke_cpu_state_save(void *buf, int type);
extern void *booke_cpu_state_restore(void *buf, int type);
diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
index e59d6de..ea9bc28 100644
--- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -318,6 +318,23 @@ flush_backside_L2_cache:
2:
blr

+#define CPC_CPCCSR0 0x0
+#define CPC_CPCCSR0_CPCFL 0x800
+
+/* r3 : the base address of CPC */
+_GLOBAL(fsl_flush_cpc_cache)
+ lwz r6, CPC_CPCCSR0(r3)
+ ori r6, r6, CPC_CPCCSR0_CPCFL
+ stw r6, CPC_CPCCSR0(r3)
+ sync
+
+ /* Wait until completing the flush */
+1: lwz r6, CPC_CPCCSR0(r3)
+ andi. r6, r6, CPC_CPCCSR0_CPCFL
+ bne 1b
+
+ blr
+
_GLOBAL(__flush_caches_e500v2)
mflr r0
bl flush_dcache_L1
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 20204fe..3285752 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -162,6 +162,19 @@ _ENTRY(__early_start)
#include "fsl_booke_entry_mapping.S"
#undef ENTRY_MAPPING_BOOT_SETUP

+#if defined(CONFIG_SUSPEND) && defined(CONFIG_FSL_CORENET_RCPM)
+ /* if deep_sleep_flag != 0, jump to the deep sleep resume entry */
+ LOAD_REG_ADDR(r4, deep_sleep_flag)
+ lwz r3, 0(r4)
+ cmpwi r3, 0
+ beq 11f
+ /* clear deep_sleep_flag */
+ li r3, 0
+ stw r3, 0(r4)
+ b fsl_deepsleep_resume
+11:
+#endif
+
set_ivor:
/* Establish the interrupt vector offsets */
SET_IVOR(0, CriticalInput);
@@ -343,6 +356,23 @@ set_ivor:
lwz r11, 0(r12); /* Get Linux PTE */
#endif

+#if defined(CONFIG_SUSPEND) && defined(CONFIG_FSL_CORENET_RCPM)
+_ENTRY(__entry_deep_sleep)
+/*
+ * Bootloader will jump to here when resuming from deep sleep.
+ * After executing the init code in fsl_booke_entry_mapping.S,
+ * will jump to the real resume entry.
+ */
+ li r8, 1
+ bl 12f
+12: mflr r9
+ addi r9, r9, (deep_sleep_flag - 12b)
+ stw r8, 0(r9)
+ b __early_start
+deep_sleep_flag:
+ .long 0
+#endif
+
/*
* Interrupt vector entry code
*
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 7fae817..9a4ea86 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -3,7 +3,7 @@
#
obj-$(CONFIG_SMP) += smp.o
ifeq ($(CONFIG_FSL_CORENET_RCPM), y)
-obj-$(CONFIG_SUSPEND) += qoriq_pm.o
+obj-$(CONFIG_SUSPEND) += qoriq_pm.o deepsleep.o sleep.o
endif

obj-y += common.o
diff --git a/arch/powerpc/platforms/85xx/deepsleep.c b/arch/powerpc/platforms/85xx/deepsleep.c
new file mode 100644
index 0000000..ddd7185
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/deepsleep.c
@@ -0,0 +1,201 @@
+/*
+ * Support deep sleep feature
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Author: Chenhui Zhao <chenhui.zhao@xxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <asm/machdep.h>
+#include <sysdev/fsl_soc.h>
+#include <asm/booke_save_regs.h>
+
+#define SIZE_1MB 0x100000
+#define SIZE_2MB 0x200000
+
+#define CCSR_SCFG_DPSLPCR 0xfc000
+#define CCSR_SCFG_DPSLPCR_WDRR_EN 0x1
+#define CCSR_SCFG_SPARECR2 0xfc504
+#define CCSR_SCFG_SPARECR3 0xfc508
+
+#define CCSR_GPIO1_GPDIR 0x130000
+#define CCSR_GPIO1_GPODR 0x130004
+#define CCSR_GPIO1_GPDAT 0x130008
+#define CCSR_GPIO1_GPDIR_29 0x4
+
+/* 128 bytes buffer for restoring data broke by DDR training initialization */
+#define DDR_BUF_SIZE 128
+static u8 ddr_buff[DDR_BUF_SIZE] __aligned(64);
+
+static void *dcsr_base, *ccsr_base, *pld_base;
+static int pld_flag;
+
+int fsl_dp_iomap(void)
+{
+ struct device_node *np;
+ const u32 *prop;
+ int ret = 0;
+ u64 ccsr_phy_addr, dcsr_phy_addr;
+
+ np = of_find_node_by_type(NULL, "soc");
+ if (!np) {
+ pr_err("%s: Can't find the node of \"soc\"\n", __func__);
+ ret = -EINVAL;
+ goto ccsr_err;
+ }
+ prop = of_get_property(np, "ranges", NULL);
+ if (!prop) {
+ pr_err("%s: Can't find the property of \"ranges\"\n", __func__);
+ of_node_put(np);
+ ret = -EINVAL;
+ goto ccsr_err;
+ }
+ ccsr_phy_addr = of_translate_address(np, prop + 1);
+ ccsr_base = ioremap((phys_addr_t)ccsr_phy_addr, SIZE_2MB);
+ of_node_put(np);
+ if (!ccsr_base) {
+ ret = -ENOMEM;
+ goto ccsr_err;
+ }
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,dcsr");
+ if (!np) {
+ pr_err("%s: Can't find the node of \"fsl,dcsr\"\n", __func__);
+ ret = -EINVAL;
+ goto dcsr_err;
+ }
+ prop = of_get_property(np, "ranges", NULL);
+ if (!prop) {
+ pr_err("%s: Can't find the property of \"ranges\"\n", __func__);
+ of_node_put(np);
+ ret = -EINVAL;
+ goto dcsr_err;
+ }
+ dcsr_phy_addr = of_translate_address(np, prop + 1);
+ dcsr_base = ioremap((phys_addr_t)dcsr_phy_addr, SIZE_1MB);
+ of_node_put(np);
+ if (!dcsr_base) {
+ ret = -ENOMEM;
+ goto dcsr_err;
+ }
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,fpga-qixis");
+ if (np) {
+ pld_flag = FPGA_FLAG;
+ } else {
+ np = of_find_compatible_node(NULL, NULL, "fsl,p104xrdb-cpld");
+ if (np) {
+ pld_flag = CPLD_FLAG;
+ } else {
+ pr_err("%s: Can't find the FPGA/CPLD node\n",
+ __func__);
+ ret = -EINVAL;
+ goto pld_err;
+ }
+ }
+ pld_base = of_iomap(np, 0);
+ of_node_put(np);
+
+ return 0;
+
+pld_err:
+ iounmap(dcsr_base);
+dcsr_err:
+ iounmap(ccsr_base);
+ccsr_err:
+ ccsr_base = NULL;
+ dcsr_base = NULL;
+ pld_base = NULL;
+ return ret;
+}
+
+void fsl_dp_iounmap(void)
+{
+ if (dcsr_base) {
+ iounmap(dcsr_base);
+ dcsr_base = NULL;
+ }
+
+ if (ccsr_base) {
+ iounmap(ccsr_base);
+ ccsr_base = NULL;
+ }
+
+ if (pld_base) {
+ iounmap(pld_base);
+ pld_base = NULL;
+ }
+}
+
+static void fsl_dp_ddr_save(void *ccsr_base)
+{
+ u32 ddr_buff_addr;
+
+ /*
+ * DDR training initialization will break 128 bytes at the beginning
+ * of DDR, therefore, save them so that the bootloader will restore
+ * them. Assume that DDR is mapped to the address space started with
+ * CONFIG_PAGE_OFFSET.
+ */
+ memcpy(ddr_buff, (void *)CONFIG_PAGE_OFFSET, DDR_BUF_SIZE);
+
+ /* assume ddr_buff is in the physical address space of 4GB */
+ ddr_buff_addr = (u32)(__pa(ddr_buff) & 0xffffffff);
+
+ /*
+ * the bootloader will restore the first 128 bytes of DDR from
+ * the location indicated by the register SPARECR3
+ */
+ out_be32(ccsr_base + CCSR_SCFG_SPARECR3, ddr_buff_addr);
+}
+
+static void fsl_dp_set_resume_pointer(void *ccsr_base)
+{
+ u32 resume_addr;
+
+ /* the bootloader will finally jump to this address to return kernel */
+#ifdef CONFIG_PPC32
+ resume_addr = (u32)(__pa(__entry_deep_sleep));
+#else
+ resume_addr = (u32)(__pa(*(u64 *)__entry_deep_sleep) & 0xffffffff);
+#endif
+
+ /* use the register SPARECR2 to save the resume address */
+ out_be32(ccsr_base + CCSR_SCFG_SPARECR2, resume_addr);
+
+}
+
+int fsl_enter_epu_deepsleep(void)
+{
+
+ fsl_dp_ddr_save(ccsr_base);
+
+ fsl_dp_set_resume_pointer(ccsr_base);
+
+ /* enable Warm Device Reset request. */
+ setbits32(ccsr_base + CCSR_SCFG_DPSLPCR, CCSR_SCFG_DPSLPCR_WDRR_EN);
+
+ /* set GPIO1_29 as an output pin (not open-drain), and output 0 */
+ clrbits32(ccsr_base + CCSR_GPIO1_GPDAT, CCSR_GPIO1_GPDIR_29);
+ clrbits32(ccsr_base + CCSR_GPIO1_GPODR, CCSR_GPIO1_GPDIR_29);
+ setbits32(ccsr_base + CCSR_GPIO1_GPDIR, CCSR_GPIO1_GPDIR_29);
+
+ fsl_dp_fsm_setup(dcsr_base);
+
+ fsl_dp_enter_low(ccsr_base, dcsr_base, pld_base, pld_flag);
+
+ /* disable Warm Device Reset request */
+ clrbits32(ccsr_base + CCSR_SCFG_DPSLPCR, CCSR_SCFG_DPSLPCR_WDRR_EN);
+
+ fsl_dp_fsm_clean(dcsr_base);
+
+ return 0;
+}
diff --git a/arch/powerpc/platforms/85xx/qoriq_pm.c b/arch/powerpc/platforms/85xx/qoriq_pm.c
index 915b13b..5f2c016 100644
--- a/arch/powerpc/platforms/85xx/qoriq_pm.c
+++ b/arch/powerpc/platforms/85xx/qoriq_pm.c
@@ -20,6 +20,8 @@
#define FSL_SLEEP 0x1
#define FSL_DEEP_SLEEP 0x2

+int (*fsl_enter_deepsleep)(void);
+
/* specify the sleep state of the present platform */
int sleep_pm_state;
/* supported sleep modes by the present platform */
@@ -28,6 +30,7 @@ static unsigned int sleep_modes;
static int qoriq_suspend_enter(suspend_state_t state)
{
int ret = 0;
+ int cpu;

switch (state) {
case PM_SUSPEND_STANDBY:
@@ -39,6 +42,17 @@ static int qoriq_suspend_enter(suspend_state_t state)

break;

+ case PM_SUSPEND_MEM:
+
+ cpu = smp_processor_id();
+ qoriq_pm_ops->irq_mask(cpu);
+
+ ret = fsl_enter_deepsleep();
+
+ qoriq_pm_ops->irq_unmask(cpu);
+
+ break;
+
default:
ret = -EINVAL;

@@ -52,12 +66,30 @@ static int qoriq_suspend_valid(suspend_state_t state)
if (state == PM_SUSPEND_STANDBY && (sleep_modes & FSL_SLEEP))
return 1;

+ if (state == PM_SUSPEND_MEM && (sleep_modes & FSL_DEEP_SLEEP))
+ return 1;
+
return 0;
}

+static int qoriq_suspend_begin(suspend_state_t state)
+{
+ if (state == PM_SUSPEND_MEM)
+ return fsl_dp_iomap();
+
+ return 0;
+}
+
+static void qoriq_suspend_end(void)
+{
+ fsl_dp_iounmap();
+}
+
static const struct platform_suspend_ops qoriq_suspend_ops = {
.valid = qoriq_suspend_valid,
.enter = qoriq_suspend_enter,
+ .begin = qoriq_suspend_begin,
+ .end = qoriq_suspend_end,
};

static int __init qoriq_suspend_init(void)
@@ -71,6 +103,12 @@ static int __init qoriq_suspend_init(void)
if (np)
sleep_pm_state = PLAT_PM_LPM20;

+ np = of_find_compatible_node(NULL, NULL, "fsl,t1040-rcpm");
+ if (np) {
+ fsl_enter_deepsleep = fsl_enter_epu_deepsleep;
+ sleep_modes |= FSL_DEEP_SLEEP;
+ }
+
suspend_set_ops(&qoriq_suspend_ops);

return 0;
diff --git a/arch/powerpc/platforms/85xx/sleep.S b/arch/powerpc/platforms/85xx/sleep.S
new file mode 100644
index 0000000..95a5746
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/sleep.S
@@ -0,0 +1,295 @@
+/*
+ * Implement the low level part of deep sleep
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/page.h>
+#include <asm/ppc_asm.h>
+#include <asm/reg.h>
+#include <asm/asm-offsets.h>
+#include <asm/booke_save_regs.h>
+#include <asm/mmu.h>
+
+#define FSLDELAY(count) \
+ li r3, (count)@l; \
+ slwi r3, r3, 10; \
+ mtctr r3; \
+101: nop; \
+ bdnz 101b;
+
+#define FSL_DIS_ALL_IRQ \
+ mfmsr r8; \
+ rlwinm r8, r8, 0, ~MSR_CE; \
+ rlwinm r8, r8, 0, ~MSR_ME; \
+ rlwinm r8, r8, 0, ~MSR_EE; \
+ rlwinm r8, r8, 0, ~MSR_DE; \
+ mtmsr r8; \
+ isync
+
+
+ .section .data
+ .align 6
+booke_regs_buffer:
+ .space REGS_BUFFER_SIZE
+
+ .section .txt
+ .align 6
+
+_GLOBAL(fsl_dp_enter_low)
+deepsleep_start:
+ LOAD_REG_ADDR(r9, buf_tmp)
+ PPC_STL r3, 0(r9)
+ PPC_STL r4, 8(r9)
+ PPC_STL r5, 16(r9)
+ PPC_STL r6, 24(r9)
+
+ LOAD_REG_ADDR(r3, booke_regs_buffer)
+ /* save the return address */
+ mflr r5
+ PPC_STL r5, SR_LR(r3)
+ mfmsr r5
+ PPC_STL r5, SR_MSR(r3)
+ li r4, DEEPSLEEP_FLAG
+ bl booke_cpu_state_save
+
+ LOAD_REG_ADDR(r9, buf_tmp)
+ PPC_LL r31, 0(r9)
+ PPC_LL r30, 8(r9)
+ PPC_LL r29, 16(r9)
+ PPC_LL r28, 24(r9)
+
+ /* flush caches */
+ LOAD_REG_ADDR(r3, cur_cpu_spec)
+ PPC_LL r3, 0(r3)
+ PPC_LL r3, CPU_FLUSH_CACHES(r3)
+ PPC_LCMPI 0, r3, 0
+ beq 6f
+#ifdef CONFIG_PPC64
+ PPC_LL r3, 0(r3)
+#endif
+ mtctr r3
+ bctrl
+6:
+#define CPC_OFFSET 0x10000
+ mr r3, r31
+ addis r3, r3, CPC_OFFSET@h
+ bl fsl_flush_cpc_cache
+
+ LOAD_REG_ADDR(r8, deepsleep_start)
+ LOAD_REG_ADDR(r9, deepsleep_end)
+
+ /* prefecth TLB */
+#define CCSR_GPIO1_GPDAT 0x130008
+#define CCSR_GPIO1_GPDAT_29 0x4
+ LOAD_REG_IMMEDIATE(r11, CCSR_GPIO1_GPDAT)
+ add r11, r31, r11
+ lwz r10, 0(r11)
+
+#define CCSR_RCPM_PCPH15SETR 0xe20b4
+#define CCSR_RCPM_PCPH15SETR_CORE0 0x1
+ LOAD_REG_IMMEDIATE(r12, CCSR_RCPM_PCPH15SETR)
+ add r12, r31, r12
+ lwz r10, 0(r12)
+
+#define CCSR_DDR_SDRAM_CFG_2 0x8114
+#define CCSR_DDR_SDRAM_CFG_2_FRC_SR 0x80000000
+ LOAD_REG_IMMEDIATE(r13, CCSR_DDR_SDRAM_CFG_2)
+ add r13, r31, r13
+ lwz r10, 0(r13)
+
+#define DCSR_EPU_EPGCR 0x000
+#define DCSR_EPU_EPGCR_GCE 0x80000000
+ li r14, DCSR_EPU_EPGCR
+ add r14, r30, r14
+ lwz r10, 0(r14)
+
+#define DCSR_EPU_EPECR15 0x33C
+#define DCSR_EPU_EPECR15_IC0 0x80000000
+ li r15, DCSR_EPU_EPECR15
+ add r15, r30, r15
+ lwz r10, 0(r15)
+
+#define CCSR_SCFG_QMCRDTRSTCR 0xfc40c
+#define CCSR_SCFG_QMCRDTRSTCR_CRDTRST 0x80000000
+ LOAD_REG_IMMEDIATE(r16, CCSR_SCFG_QMCRDTRSTCR)
+ add r16, r31, r16
+ lwz r10, 0(r16)
+
+/*
+ * There are two kind of register maps, one for CPLD and the other for FPGA
+ */
+#define CPLD_MISCCSR 0x17
+#define CPLD_MISCCSR_SLEEPEN 0x40
+#define QIXIS_PWR_CTL2 0x21
+#define QIXIS_PWR_CTL2_PCTL 0x2
+ PPC_LCMPI 0, r28, FPGA_FLAG
+ beq 20f
+ addi r29, r29, CPLD_MISCCSR
+20:
+ addi r29, r29, QIXIS_PWR_CTL2
+ lbz r10, 0(r29)
+
+ /* prefecth code to cache so that executing code after disable DDR */
+1: lwz r3, 0(r8)
+ addi r8, r8, 4
+ cmpw r8, r9
+ blt 1b
+ msync
+
+ FSL_DIS_ALL_IRQ
+
+ /*
+ * Place DDR controller in self refresh mode.
+ * From here on, DDR can't be access any more.
+ */
+ lwz r10, 0(r13)
+ oris r10, r10, CCSR_DDR_SDRAM_CFG_2_FRC_SR@h
+ stw r10, 0(r13)
+
+ /* can't call udelay() here, so use a macro to delay */
+ FSLDELAY(50)
+
+ /*
+ * Enable deep sleep signals by write external CPLD/FPGA register.
+ * The bootloader will disable them when wakeup from deep sleep.
+ */
+ lbz r10, 0(r29)
+ PPC_LCMPI 0, r28, FPGA_FLAG
+ beq 22f
+ ori r10, r10, CPLD_MISCCSR_SLEEPEN
+22:
+ ori r10, r10, QIXIS_PWR_CTL2_PCTL
+ stb r10, 0(r29)
+
+ /*
+ * Set GPIO1_29 to lock the signal MCKE down during deep sleep.
+ * The bootloader will clear it when wakeup.
+ */
+ lwz r10, 0(r11)
+ ori r10, r10, CCSR_GPIO1_GPDAT_29
+ stw r10, 0(r11)
+
+ FSLDELAY(10)
+
+ /* Clear the QMan CITI Credits */
+ lwz r10, 0(r16)
+ oris r10, r10, CCSR_SCFG_QMCRDTRSTCR_CRDTRST@h
+ stw r10, 0(r16)
+
+ /* Enable all EPU Counters */
+ li r10, 0
+ oris r10, r10, DCSR_EPU_EPGCR_GCE@h
+ stw r10, 0(r14)
+
+ /* Enable SCU15 to trigger on RCPM Concentrator 0 */
+ lwz r10, 0(r15)
+ oris r10, r10, DCSR_EPU_EPECR15_IC0@h
+ stw r10, 0(r15)
+
+ /* put Core0 in PH15 mode, trigger EPU FSM */
+ lwz r10, 0(r12)
+ ori r10, r10, CCSR_RCPM_PCPH15SETR_CORE0
+ stw r10, 0(r12)
+
+2:
+ b 2b
+
+ /*
+ * Leave some space to prevent prefeching instruction
+ * beyond deepsleep_end. The space also can be used as heap.
+ */
+buf_tmp:
+ .space 128
+ .align 6
+deepsleep_end:
+
+#ifdef CONFIG_PPC32
+_GLOBAL(fsl_deepsleep_resume)
+ /* disable interrupts */
+ FSL_DIS_ALL_IRQ
+
+ li r3, 0
+ mfspr r4, SPRN_PIR
+ bl call_setup_cpu
+
+ /* Load each CAM entry */
+ LOAD_REG_ADDR(r3, tlbcam_index)
+ lwz r3, 0(r3)
+ mtctr r3
+ li r0, 0
+3: mr r3, r0
+ bl loadcam_entry
+ addi r0, r0, 1
+ bdnz 3b
+
+ /* restore cpu registers */
+ LOAD_REG_ADDR(r3, booke_regs_buffer)
+ li r4, DEEPSLEEP_FLAG
+ bl booke_cpu_state_restore
+
+ LOAD_REG_ADDR(r3, booke_regs_buffer)
+ lwz r4, SR_MSR(r3)
+ mtmsr r4
+ lwz r4, SR_LR(r3)
+ mtlr r4
+
+ blr
+
+#else /* CONFIG_PPC32 */
+
+_GLOBAL(__entry_deep_sleep)
+ /* disable interrupts */
+ FSL_DIS_ALL_IRQ
+
+ /* switch to 64-bit mode */
+ bl .enable_64b_mode
+
+ /* set TOC pointer */
+ bl .relative_toc
+
+ /* setup initial TLBs, switch to kernel space ... */
+ bl .start_initialization_book3e
+
+ /* address space changed, set TOC pointer again */
+ bl .relative_toc
+
+ /* call a cpu state restore handler */
+ LOAD_REG_ADDR(r23, cur_cpu_spec)
+ ld r23,0(r23)
+ ld r23,CPU_SPEC_RESTORE(r23)
+ cmpdi 0,r23,0
+ beq 1f
+ ld r23,0(r23)
+ mtctr r23
+ bctrl
+1:
+ LOAD_REG_ADDR(r3, booke_regs_buffer)
+ li r4, DEEPSLEEP_FLAG
+ bl booke_cpu_state_restore
+
+ /* Load each CAM entry */
+ LOAD_REG_ADDR(r3, tlbcam_index)
+ lwz r3, 0(r3)
+ mtctr r3
+ li r0, 0
+3: mr r3, r0
+ bl loadcam_entry
+ addi r0, r0, 1
+ bdnz 3b
+
+ /* restore return address */
+ LOAD_REG_ADDR(r3, booke_regs_buffer)
+ ld r4, SR_MSR(r3)
+ mtmsr r4
+ ld r4, SR_LR(r3)
+ mtlr r4
+
+ blr
+
+#endif /* CONFIG_PPC32 */
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index eb83a30..7351c40 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -67,7 +67,14 @@ extern const struct fsl_pm_ops *qoriq_pm_ops;
#define PLAT_PM_SLEEP 20
#define PLAT_PM_LPM20 30

+extern int fsl_dp_iomap(void);
+extern void fsl_dp_iounmap(void);
+
extern int fsl_rcpm_init(void);
+extern int fsl_enter_epu_deepsleep(void);
+extern void fsl_dp_enter_low(void *ccsr_base, void *dcsr_base,
+ void *pld_base, int pld_flag);
+extern void __entry_deep_sleep(void);

extern void fsl_dp_fsm_setup(void *dcsr_base);
extern void fsl_dp_fsm_clean(void *dcsr_base);
--
1.7.3


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/