Re: [PATCH v4] can: xilinx CAN controller support.

From: Marc Kleine-Budde
Date: Fri Feb 28 2014 - 08:15:47 EST


On 02/28/2014 02:07 PM, Appana Durga Kedareswara Rao wrote:
>>>> What happens if the interrupt handler is delayed? For example in a RT
>>>> enabled system the interrupt handler runs as a thread. There might be
>>>> other threads with higher priority. The hardware will probably send
>>>> all CAN frames in the FIFO, so you want to reduce the overhead and
>>>> loop in the tx complete handler.
>>>>
>>> Yes I agree with your comment.
>>> It will be good to have a loop in the Tx interrupt handler I am
>>> modifying the Tx interrupt handler like below.
>>>
>>> static void xcan_tx_interrupt(struct net_device *ndev, u32 isr) {
>>> struct xcan_priv *priv = netdev_priv(ndev);
>>> struct net_device_stats *stats = &ndev->stats;
>>>
>>> while (priv->tx_head - priv->tx_tail > 0) {
>>> if (!(isr & XCAN_IXR_TXOK_MASK)) {
>>> break;
>>> }
>>> can_get_echo_skb(ndev, priv->tx_tail %
>>> priv->xcan_echo_skb_max_tx);
>>> priv->tx_tail++;
>>> stats->tx_packets++;
>>> can_led_event(ndev, CAN_LED_EVENT_TX);

Probably first clear the interrupt, because you've just handled it, then
check if it's still present. The question is, do you have to clear the
IRQ for each transmitted frame, or does one clean of the interrupt clear
the bit for more then one transmitted frame?

>>> isr = priv->read_reg(priv, XCAN_ISR_OFFSET);
> --> clear Tx OK interrupt.

>
>>> }
>>> netif_wake_queue(ndev);
>>> }
>>>
>>> Are you Ok with this?

Were getting there :)

Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |

Attachment: signature.asc
Description: OpenPGP digital signature