[PATCH] ASoC: fsl-sai: Add SND_SOC_DAIFMT_DSP_A/B support.

From: Xiubo Li
Date: Wed Feb 26 2014 - 20:51:42 EST


o Add SND_SOC_DAIFMT_DSP_A support.
o Add SND_SOC_DAIFMT_DSP_B support.

Signed-off-by: Xiubo Li <Li.Xiubo@xxxxxxxxxxxxx>
---
sound/soc/fsl/fsl_sai.c | 45 ++++++++++++++++++++++++++++++++++++++++++---
sound/soc/fsl/fsl_sai.h | 1 +
2 files changed, 43 insertions(+), 3 deletions(-)

diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index 26d9f5e..c4a4231 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -108,15 +108,44 @@ static int fsl_sai_set_dai_fmt_tr(struct snd_soc_dai *cpu_dai,
/* DAI mode */
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
- /* Data on rising edge of bclk, frame low, 1clk before data */
+ /*
+ * Frame low, 1clk before data, one word length for frame sync,
+ * frame sync starts one serial clock cycle earlier,
+ * that is, together with the last bit of the previous
+ * data word.
+ */
val_cr2 &= ~FSL_SAI_CR2_BCP;
val_cr4 |= FSL_SAI_CR4_FSE | FSL_SAI_CR4_FSP;
break;
case SND_SOC_DAIFMT_LEFT_J:
- /* Data on rising edge of bclk, frame high, 0clk before data */
+ /*
+ * Frame high, one word length for frame sync,
+ * frame sync asserts with the first bit of the frame.
+ */
val_cr2 &= ~FSL_SAI_CR2_BCP;
val_cr4 &= ~(FSL_SAI_CR4_FSE | FSL_SAI_CR4_FSP);
break;
+ case SND_SOC_DAIFMT_DSP_A:
+ /*
+ * Frame high, 1clk before data, one bit for frame sync,
+ * frame sync starts one serial clock cycle earlier,
+ * that is, together with the last bit of the previous
+ * data word.
+ */
+ val_cr2 &= ~FSL_SAI_CR2_BCP;
+ val_cr4 &= ~FSL_SAI_CR4_FSP;
+ val_cr4 |= FSL_SAI_CR4_FSE;
+ sai->is_dsp_mode = true;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ /*
+ * Frame high, one bit for frame sync,
+ * frame sync asserts with the first bit of the frame.
+ */
+ val_cr2 &= ~FSL_SAI_CR2_BCP;
+ val_cr4 &= ~(FSL_SAI_CR4_FSE | FSL_SAI_CR4_FSP);
+ sai->is_dsp_mode = true;
+ break;
case SND_SOC_DAIFMT_RIGHT_J:
/* To be done */
default:
@@ -219,7 +248,9 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
val_cr5 &= ~FSL_SAI_CR5_W0W_MASK;
val_cr5 &= ~FSL_SAI_CR5_FBT_MASK;

- val_cr4 |= FSL_SAI_CR4_SYWD(word_width);
+ if (!sai->is_dsp_mode)
+ val_cr4 |= FSL_SAI_CR4_SYWD(word_width);
+
val_cr5 |= FSL_SAI_CR5_WNW(word_width);
val_cr5 |= FSL_SAI_CR5_W0W(word_width);

@@ -245,6 +276,10 @@ static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
u32 tcsr, rcsr;

+ /*
+ * The transmitter bit clock and frame sync are to be
+ * used by both the transmitter and receiver.
+ */
regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_SYNC,
~FSL_SAI_CR2_SYNC);
regmap_update_bits(sai->regmap, FSL_SAI_RCR2, FSL_SAI_CR2_SYNC,
@@ -261,6 +296,10 @@ static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
tcsr &= ~FSL_SAI_CSR_FRDE;
}

+ /*
+ * It is recommended that the transmitter is the last enabled
+ * and the first disabled.
+ */
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h
index 1571459..e432260 100644
--- a/sound/soc/fsl/fsl_sai.h
+++ b/sound/soc/fsl/fsl_sai.h
@@ -103,6 +103,7 @@ struct fsl_sai {

bool big_endian_regs;
bool big_endian_data;
+ bool is_dsp_mode;

struct snd_dmaengine_dai_dma_data dma_params_rx;
struct snd_dmaengine_dai_dma_data dma_params_tx;
--
1.8.4


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/