Re: [PATCHv3 4/9] ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek

[Alexandre Belloni]

Hi,

On 21/02/2014 at 20:48:53 +0100, Alexandre Belloni wrote :
> +	ahb {
> +		apb {
> +			mmc0: mmc@fffa4000 {
> +				pinctrl-0 = <
> +					&pinctrl_board_mmc0
> +					&pinctrl_mmc0_clk
> +					&pinctrl_mmc0_slot0_cmd_dat0
> +					&pinctrl_mmc0_slot0_dat1_3>;
> +				status = "okay";
> +				slot@0 {
> +					reg = <0>;
> +					bus-width = <4>;
> +					cd-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
> +				};
> +			};
> +
> +			usart0: serial@fffb0000 {
> +				pinctrl-0 = <
> +					&pinctrl_usart0
> +					&pinctrl_usart0_rts
> +					&pinctrl_usart0_cts>;
> +				status = "okay";
> +			};
> +
> +			dbgu: serial@fffff200 {
> +				status = "okay";
> +			};
> +
> +			pinctrl@fffff400 {
> +				mmc0 {
> +					pinctrl_board_mmc0: mmc0-board {
> +						atmel,pins =
> +							<AT91_PIOA 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
> +					};
> +				};
> +			};
> +
> +			watchdog@fffffd40 {
> +				status = "okay";
> +			};
> +		};
> +

I just realised, do you want me to actually put the nand before the apb ?

> +		nand0: nand@40000000 {
> +			nand-bus-width = <8>;
> +			nand-ecc-mode = "soft";
> +			nand-on-flash-bbt = <1>;
> +			status = "okay";
> +
> +			at91bootstrap@0 {
> +				label = "at91bootstrap";
> +				reg = <0x0 0x40000>;
> +			};
> +
> +			bootloader@40000 {
> +				label = "bootloader";
> +				reg = <0x40000 0x80000>;
> +			};
> +
> +			bootloaderenv@c0000 {
> +				label = "bootloader env";
> +				reg = <0xc0000 0xc0000>;
> +			};
> +
> +			dtb@180000 {
> +				label = "device tree";
> +				reg = <0x180000 0x80000>;
> +			};
> +
> +			kernel@200000 {
> +				label = "kernel";
> +				reg = <0x200000 0x600000>;
> +			};
> +
> +			rootfs@800000 {
> +				label = "rootfs";
> +				reg = <0x800000 0x0f800000>;
> +			};
> +		};
> +	};
> +

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/