[RFC PATCH 0/2] mtd: nand: add manafacturer specific handling

[Boris BREZILLON]

Hello,

This is a proposal to add support for manufacturer specific handling of
NAND chips.

Currently the only ones allowed to modify how NAND chips are accessed are
NAND controllers (by modifying the nand_chip callbacks) and NAND core code
(by setting default callbacks when these are not specified by the NAND
controller).

This series adds support for manufacturer/vendor specific handling, which is
particularly useful for read retry implementation that are (at least for
the moment) manufacturer specific.

I know there was a debate on how we should support all these READ RETRY
implementations (see http://permalink.gmane.org/gmane.linux.drivers.mtd/50603),
so please tell if I'm wrong.

Best Regards,

Boris


Boris BREZILLON (2):
  mtd: nand: add manufacturer specific init infrastructure
  mtd: nand: add hynix specific initializer

 drivers/mtd/nand/Makefile     |    2 +-
 drivers/mtd/nand/nand_base.c  |    7 ++
 drivers/mtd/nand/nand_hynix.c |  151 +++++++++++++++++++++++++++++++++++++++++
 drivers/mtd/nand/nand_ids.c   |    3 +-
 include/linux/mtd/nand.h      |    6 ++
 5 files changed, 167 insertions(+), 2 deletions(-)
 create mode 100644 drivers/mtd/nand/nand_hynix.c

-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/