Re: locking changes in tty broke low latency feature

[One Thousand Gnomes]

> This is a complete pointless test. Use a bog standard 8250 UART on the
> PC and connect a microcontroller on the other end which serves you an
> continous stream of data at 115200 Baud.
> 
> There is no way you can keep up with that without the low latency
> option neither on old and nor on new machines if you have enough other
> stuff going on in the system.

Sorry but having done this in the past the reverse is true. On ancient
machines with crap uarts the low_latency case would routinely overrun
while the non low_latency case did not. That was half of the point of
deferred processing - it pushed tty processing out of the IRQ handler so
bytes were not lost and a 486DX could cope with a 56Kbit modem.

Alan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/