Re: [RFT][PATCH v3] mmc: change cb710-mmc platform power management to use dev_pm_ops

[Ulf Hansson]

On 12 February 2014 22:21, Shuah Khan <shuah.kh@xxxxxxxxxxx> wrote:
> Change cb710-mmc platform driver to register pm ops using dev_pm_ops instead
> of legacy pm_ops. The existing legacy suspend/resume routines are identical
> and simply clear IRQ mask in the device in case it got undefined during sleep
> state. Changed code to collapse suspend and resume into one .pm interface
> for suspend and resume which gets installed for suspend, freeze, poweroff,
> thaw, restore, and resume states using SIMPLE_DEV_PM_OPS().
>
> Signed-off-by: Shuah Khan <shuah.kh@xxxxxxxxxxx>
> ---
>
> patch v3: Addresses review comments on patch v2
>
>  drivers/mmc/host/cb710-mmc.c |   40 ++++++++++++++++------------------------
>  1 file changed, 16 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c
> index 1087b4c..2dc7b2dc 100644
> --- a/drivers/mmc/host/cb710-mmc.c
> +++ b/drivers/mmc/host/cb710-mmc.c
> @@ -662,26 +662,6 @@ static const struct mmc_host_ops cb710_mmc_host = {
>         .get_cd = cb710_mmc_get_cd,
>  };
>
> -#ifdef CONFIG_PM
> -
> -static int cb710_mmc_suspend(struct platform_device *pdev, pm_message_t state)
> -{
> -       struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
> -
> -       cb710_mmc_enable_irq(slot, 0, ~0);
> -       return 0;
> -}
> -
> -static int cb710_mmc_resume(struct platform_device *pdev)
> -{
> -       struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
> -
> -       cb710_mmc_enable_irq(slot, 0, ~0);
> -       return 0;
> -}
> -
> -#endif /* CONFIG_PM */
> -
>  static int cb710_mmc_init(struct platform_device *pdev)
>  {
>         struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
> @@ -762,14 +742,26 @@ static int cb710_mmc_exit(struct platform_device *pdev)
>         return 0;
>  }
>
> +#ifdef CONFIG_PM_SLEEP
> +static int cb710_mmc_suspend_resume(struct device *dev)
> +{
> +       struct cb710_slot *slot = cb710_pdev_to_slot(to_platform_device(dev));
> +
> +       cb710_mmc_enable_irq(slot, 0, ~0);
> +       return 0;
> +}
> +#else
> +#define cb710_mmc_suspend_resume NULL

You don't need this. The macro will handle this for you.

Kind regards
Ulf Hansson

> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(cb710_mmc_dev_pm_ops, cb710_mmc_suspend_resume,
> +                        cb710_mmc_suspend_resume);
> +
>  static struct platform_driver cb710_mmc_driver = {
>         .driver.name = "cb710-mmc",
>         .probe = cb710_mmc_init,
>         .remove = cb710_mmc_exit,
> -#ifdef CONFIG_PM
> -       .suspend = cb710_mmc_suspend,
> -       .resume = cb710_mmc_resume,
> -#endif
> +       .driver.pm = &cb710_mmc_dev_pm_ops,
>  };
>
>  module_platform_driver(cb710_mmc_driver);
> --
> 1.7.10.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/