[PATCH 07/28] Remove CPU_PXA988

From: Richard Weinberger
Date: Sun Feb 09 2014 - 13:55:48 EST


The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@xxxxxx>
---
drivers/video/mmp/Kconfig | 2 +-
drivers/video/mmp/hw/Kconfig | 2 +-
drivers/video/mmp/hw/mmp_ctrl.h | 32 --------------------------------
3 files changed, 2 insertions(+), 34 deletions(-)

diff --git a/drivers/video/mmp/Kconfig b/drivers/video/mmp/Kconfig
index 969925d..f37bd6c 100644
--- a/drivers/video/mmp/Kconfig
+++ b/drivers/video/mmp/Kconfig
@@ -1,6 +1,6 @@
menuconfig MMP_DISP
tristate "Marvell MMP Display Subsystem support"
- depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988
+ depends on CPU_PXA910 || CPU_MMP2
help
Marvell Display Subsystem support.

diff --git a/drivers/video/mmp/hw/Kconfig b/drivers/video/mmp/hw/Kconfig
index 57b03e2..95e8ec2 100644
--- a/drivers/video/mmp/hw/Kconfig
+++ b/drivers/video/mmp/hw/Kconfig
@@ -2,7 +2,7 @@ if MMP_DISP

config MMP_DISP_CONTROLLER
bool "mmp display controller hw support"
- depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988
+ depends on CPU_PXA910 || CPU_MMP2
default n
help
Marvell MMP display hw controller support
diff --git a/drivers/video/mmp/hw/mmp_ctrl.h b/drivers/video/mmp/hw/mmp_ctrl.h
index 53301cf..56fdeab 100644
--- a/drivers/video/mmp/hw/mmp_ctrl.h
+++ b/drivers/video/mmp/hw/mmp_ctrl.h
@@ -167,11 +167,7 @@ struct lcd_regs {
PN2_IOPAD_CONTROL) : LCD_TOP_CTRL)

/* dither configure */
-#ifdef CONFIG_CPU_PXA988
-#define LCD_DITHER_CTRL (0x01EC)
-#else
#define LCD_DITHER_CTRL (0x00A0)
-#endif

#define DITHER_TBL_INDEX_SEL(s) ((s) << 16)
#define DITHER_MODE2(m) ((m) << 12)
@@ -186,15 +182,6 @@ struct lcd_regs {
#define DITHER_EN1 (1)

/* dither table data was fixed by video bpp of input and output*/
-#ifdef CONFIG_CPU_PXA988
-#define DITHER_TB_4X4_INDEX0 (0x6e4ca280)
-#define DITHER_TB_4X4_INDEX1 (0x5d7f91b3)
-#define DITHER_TB_4X8_INDEX0 (0xb391a280)
-#define DITHER_TB_4X8_INDEX1 (0x7f5d6e4c)
-#define DITHER_TB_4X8_INDEX2 (0x80a291b3)
-#define DITHER_TB_4X8_INDEX3 (0x4c6e5d7f)
-#define LCD_DITHER_TBL_DATA (0x01F0)
-#else
#define DITHER_TB_4X4_INDEX0 (0x3b19f7d5)
#define DITHER_TB_4X4_INDEX1 (0x082ac4e6)
#define DITHER_TB_4X8_INDEX0 (0xf7d508e6)
@@ -202,7 +189,6 @@ struct lcd_regs {
#define DITHER_TB_4X8_INDEX2 (0xc4e6d5f7)
#define DITHER_TB_4X8_INDEX3 (0x082a193b)
#define LCD_DITHER_TBL_DATA (0x00A4)
-#endif

/* Video Frame 0&1 start address registers */
#define LCD_SPU_DMA_START_ADDR_Y0 0x00C0
@@ -933,16 +919,9 @@ struct lcd_regs {
#define LCD_PN2_SQULN2_CTRL (0x02F0)
#define ALL_LAYER_ALPHA_SEL (0x02F4)

-/* pxa988 has different MASTER_CTRL from MMP3/MMP2 */
-#ifdef CONFIG_CPU_PXA988
-#define TIMING_MASTER_CONTROL (0x01F4)
-#define MASTER_ENH(id) (1 << ((id) + 5))
-#define MASTER_ENV(id) (1 << ((id) + 6))
-#else
#define TIMING_MASTER_CONTROL (0x02F8)
#define MASTER_ENH(id) (1 << (id))
#define MASTER_ENV(id) (1 << ((id) + 4))
-#endif

#define DSI_START_SEL_SHIFT(id) (((id) << 1) + 8)
#define timing_master_config(path, dsi_id, lcd_id) \
@@ -1312,19 +1291,8 @@ struct dsi_regs {
#define DSI_PHY_TIME_3_CFG_CSR_TIME_REQRDY_MASK (0xff)
#define DSI_PHY_TIME_3_CFG_CSR_TIME_REQRDY_SHIFT 0

-/*
- * DSI timings
- * PXA988 has diffrent ESC CLK with MMP2/MMP3
- * it will be used in dsi_set_dphy() in pxa688_phy.c
- * as low power mode clock.
- */
-#ifdef CONFIG_CPU_PXA988
-#define DSI_ESC_CLK 52 /* Unit: Mhz */
-#define DSI_ESC_CLK_T 19 /* Unit: ns */
-#else
#define DSI_ESC_CLK 66 /* Unit: Mhz */
#define DSI_ESC_CLK_T 15 /* Unit: ns */
-#endif

/* LVDS */
/* LVDS_PHY_CTRL */
--
1.8.4.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/