Re: [PATCH 3/3] ARM: allow kernel to be loaded in middle of phymem

From: Russell King - ARM Linux
Date: Thu Jan 23 2014 - 14:32:18 EST

On Thu, Jan 23, 2014 at 02:15:07PM -0500, Nicolas Pitre wrote:
> On Wed, 22 Jan 2014, Wang Nan wrote:
> > This patch allows the kernel to be loaded at the middle of kernel awared
> > physical memory. Before this patch, users must use mem= or device tree to cheat
> > kernel about the start address of physical memory.
> >
> > This feature is useful in some special cases, for example, building a crash
> > dump kernel. Without it, kernel command line, atag and devicetree must be
> > adjusted carefully, sometimes is impossible.
> With CONFIG_PATCH_PHYS_VIRT the value for PHYS_OFFSET is determined
> dynamically by rounding down the kernel image start address to the
> previous 16MB boundary. In the case of a crash kernel, this might be
> cleaner to simply readjust __pv_phys_offset during early boot and call
> fixup_pv_table(), and then reserve away the memory from the previous
> kernel. That will let you access that memory directly (with gdb for
> example) and no pointer address translation will be required.

We already have support in the kernel to ignore memory below the calculated
PHYS_OFFSET. See 571b14375019c3a66ef70d4d4a7083f4238aca30.

FTTC broadband for 0.8mile line: 5.8Mbps down 500kbps up. Estimation
in database were 13.1 to 19Mbit for a good line, about 7.5+ for a bad.
Estimate before purchase was "up to 13.2Mbit".
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at
Please read the FAQ at