[GIT PULL] First round of SCSI updates for the 3.13+ merge window

From: James Bottomley
Date: Wed Jan 22 2014 - 13:04:32 EST

Next message: Arun Sharma: "Re: [PATCHSET 00/24] perf tools: Add support to accumulate hist periods(v6)"
Previous message: David Cohen: "Re: [PATCH] x86: don't add new __cpuinit users to Merrifieldplatform code"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This patch set is a lot of driver updates for qla4xxx, bfa, hpsa,
qla2xxx. It also removes the aic7xxx_old driver (which has been
deprecated for nearly a decade) and adds support for deadlines in error
handling.

The patch is available here:

git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-for-linus

The short changelog is:

Aaron Lu (1):
sr: use block layer runtime PM

Adheer Chandravanshi (5):
qla4xxx: Recreate chap data list during get chap operation
qla4xxx: Add support for ISCSI_PARAM_LOCAL_IPADDR sysfs attr
libiscsi: Add local_ipaddr parameter in iscsi_conn struct
scsi_transport_iscsi: Export ISCSI_PARAM_LOCAL_IPADDR attr for iscsi_connection
qla4xxx: Update driver version to 5.04.00-k2

Akinobu Mita (1):
scsi_debug: simplify creation and destruction of driver attribute files

Alan (1):
mac_scsi: Fix crash on out of memory

Armen Baloyan (5):
qla2xxx: Replace a constant with a macro definition for host->canqueue assigmnment.
qla2xxx: Add changes to obtain ISPFX00 adapters product information in accordance with firmware update.
qla2xxx: Add logic to abort BSG commands for ISPFX00.
qla2xxx: Fix issue with not displaying node name after system reboot.
qla2xxx: Print proper QLAFX00 product name at probe.

Atul Deshmukh (1):
qla2xxx: Clear RISC INT reg only for an event and not always while polling.

Ben Collins (1):
megaraid: Use resource_size_t for PCI resources, not long

Bodo Stroesser (1):
st: fix enlarge_buffer

Chad Dupuis (7):
qla2xxx: Only complete dcbx_comp and lb_portup_comp for virtual port index 0.
qla2xxx: Use the correct mailbox registers when acknowledging an IDC request on ISP8044.
qla2xxx: Disable adapter when we encounter a PCI disconnect.
qla2xxx: Refactor shutdown code so some functionality can be reused.
Revert "qla2xxx: Ramp down queue depth for attached SCSI devices when driver resources are low."
qla2xxx: Add BPM support for ISP25xx.
qla2xxx: Honor execute firmware failures.

Dan Carpenter (1):
qla4xxx: overflow in qla4xxx_set_chap_entry()

Douglas Gilbert (1):
MAINTAINERS: update sg entry

Felipe Pena (1):
lpfc: Fix wrong assignment in lpfc_debugfs.c

Geert Uytterhoeven (1):
sd: Do not call do_div() with a 64-bit divisor

Geyslan G. Bem (1):
be2iscsi: fix memory leak in error path

Hannes Reinecke (3):
Update documentation
Unlock accesses to eh_deadline
improved eh timeout handler

Harish Zunjarrao (3):
qla4xxx: Add support for additional network parameters settings
iscsi_transport: Additional parameters for network settings
iscsi_transport: Remove net param enum values

James Bottomley (1):
Fix erratic device offline during EH

Joe Carnuccio (3):
qla2xxx: Fix undefined behavior in call to snprintf().
qla2xxx: Add BSG interface for read/write serdes register.
qla2xxx: Correctly set mailboxes for extended init control block.

Lalit Chandivade (2):
qla4xxx: Add host statistics support
scsi_transport_iscsi: Add host statistics support

Matt Gates (1):
hpsa: allow SCSI mid layer to handle unit attention

Meelis Roos (1):
qla1280: Annotate timer on stack so object debug does not complain

Mike Miller (1):
hpsa: remove P822se PCI ID

Paul Gortmaker (1):
aci7xxx_old: delete decade+ obsolete driver

Ren Mingxin (1):
Set the minimum valid value of 'eh_deadline' as 0

Saurav Kashyap (4):
qla2xxx: Fix warning reported by smatch.
qla2xxx: Update the driver version to 8.06.00.12-k.
qla2xxx: Adding MAINTAINERS for qla2xxx FC-SCSI driver
qla2xxx: Don't consider the drivers knocked out of IDC participation for future reset recovery process.

Sawan Chandak (3):
qla2xxx: Reset nic_core_reset_owner on moving from COLD to READY for ISP8044
qla2xxx: Use scnprintf() instead of snprintf() in the sysfs handlers.
qla2xxx: Disable INTx interrupt for ISP82XX

Stephen M. Cameron (11):
hpsa: do not require board "not ready" status after hard reset
hpsa: enable unit attention reporting
hpsa: rename scsi prefetch field
hpsa: use workqueue instead of kernel thread for lockup detection
hpsa: prevent stalled i/o
hpsa: cap CCISS_PASSTHRU at 20 concurrent commands.
hpsa: add MSA 2040 to list of external target devices
hpsa: fix memory leak in CCISS_BIG_PASSTHRU ioctl
hpsa: remove unneeded include of seq_file.h
hpsa: add 5 second delay after doorbell reset
hpsa: do not attempt to flush the cache on locked up controllers

Vijaya Mohan Guvva (8):
bfa: Driver version upgrade to 3.2.23.0
bfa: change FC_ELS_TOV to 20sec
bfa: Observed auto D-port mode instead of manual
bfa: Fix for bcu or hcm faa query hang
bfa: LUN discovery issue in direct attach mode
bfa: Register port with SCSI even on port init failure
bfa: Firmware patch simplification
bfa: Chinook quad port 16G FC HBA claim issue

Vikas Chaudhary (2):
qla4xxx: Update driver version to 5.04.00-k3
qla4xxx: Added support for Diagnostics MBOX command

wenxiong@xxxxxxxxxxxxxxxxxx (2):
ipr: increase dump size in ipr driver
ipr: Increase msi-x interrupt vectors to 16

and the diffstat

Documentation/scsi/00-INDEX | 2 -
Documentation/scsi/aic7xxx_old.txt | 511 --
Documentation/scsi/scsi_eh.txt | 69 +-
Documentation/scsi/scsi_mid_low_api.txt | 9 +-
MAINTAINERS | 7 +-
drivers/scsi/Kconfig | 41 -
drivers/scsi/Makefile | 1 -
drivers/scsi/aic7xxx_old.c | 11149 ----------------------------
drivers/scsi/aic7xxx_old/aic7xxx.h | 28 -
drivers/scsi/aic7xxx_old/aic7xxx.reg | 1401 ----
drivers/scsi/aic7xxx_old/aic7xxx.seq | 1539 ----
drivers/scsi/aic7xxx_old/aic7xxx_proc.c | 270 -
drivers/scsi/aic7xxx_old/aic7xxx_reg.h | 629 --
drivers/scsi/aic7xxx_old/aic7xxx_seq.c | 817 --
drivers/scsi/aic7xxx_old/scsi_message.h | 49 -
drivers/scsi/aic7xxx_old/sequencer.h | 135 -
drivers/scsi/be2iscsi/be_iscsi.c | 8 +-
drivers/scsi/bfa/bfa_core.c | 8 +-
drivers/scsi/bfa/bfa_defs.h | 1 +
drivers/scsi/bfa/bfa_fc.h | 2 +-
drivers/scsi/bfa/bfa_fcs_lport.c | 15 +-
drivers/scsi/bfa/bfa_ioc.c | 727 +-
drivers/scsi/bfa/bfa_ioc.h | 7 +-
drivers/scsi/bfa/bfa_ioc_cb.c | 23 +
drivers/scsi/bfa/bfa_svc.c | 2 +-
drivers/scsi/bfa/bfad.c | 97 +-
drivers/scsi/bfa/bfad_bsg.c | 15 +
drivers/scsi/bfa/bfad_bsg.h | 1 +
drivers/scsi/bfa/bfad_drv.h | 6 +-
drivers/scsi/bfa/bfi.h | 42 +-
drivers/scsi/hosts.c | 31 +-
drivers/scsi/hpsa.c | 241 +-
drivers/scsi/hpsa.h | 9 +-
drivers/scsi/hpsa_cmd.h | 4 +-
drivers/scsi/ipr.c | 2 +-
drivers/scsi/ipr.h | 4 +-
drivers/scsi/libiscsi.c | 6 +
drivers/scsi/lpfc/lpfc_debugfs.c | 2 +-
drivers/scsi/mac_scsi.c | 2 +
drivers/scsi/megaraid/megaraid_sas.h | 1 -
drivers/scsi/megaraid/megaraid_sas_base.c | 5 +-
drivers/scsi/qla1280.c | 2 +-
drivers/scsi/qla2xxx/qla_attr.c | 116 +-
drivers/scsi/qla2xxx/qla_bsg.c | 44 +
drivers/scsi/qla2xxx/qla_bsg.h | 13 +
drivers/scsi/qla2xxx/qla_dbg.c | 7 +-
drivers/scsi/qla2xxx/qla_def.h | 22 +-
drivers/scsi/qla2xxx/qla_gbl.h | 15 +-
drivers/scsi/qla2xxx/qla_init.c | 2 +
drivers/scsi/qla2xxx/qla_inline.h | 19 -
drivers/scsi/qla2xxx/qla_isr.c | 82 +-
drivers/scsi/qla2xxx/qla_mbx.c | 73 +-
drivers/scsi/qla2xxx/qla_mr.c | 39 +-
drivers/scsi/qla2xxx/qla_mr.h | 12 +-
drivers/scsi/qla2xxx/qla_nx.c | 22 +-
drivers/scsi/qla2xxx/qla_nx2.c | 33 +-
drivers/scsi/qla2xxx/qla_os.c | 368 +-
drivers/scsi/qla2xxx/qla_version.h | 2 +-
drivers/scsi/qla4xxx/ql4_bsg.c | 360 +
drivers/scsi/qla4xxx/ql4_bsg.h | 13 +
drivers/scsi/qla4xxx/ql4_def.h | 40 +
drivers/scsi/qla4xxx/ql4_fw.h | 140 +-
drivers/scsi/qla4xxx/ql4_glbl.h | 3 +
drivers/scsi/qla4xxx/ql4_isr.c | 51 +-
drivers/scsi/qla4xxx/ql4_mbx.c | 154 +-
drivers/scsi/qla4xxx/ql4_os.c | 2330 ++++--
drivers/scsi/qla4xxx/ql4_version.h | 2 +-
drivers/scsi/scsi.c | 9 +-
drivers/scsi/scsi_debug.c | 266 +-
drivers/scsi/scsi_error.c | 229 +-
drivers/scsi/scsi_pm.c | 62 +-
drivers/scsi/scsi_priv.h | 2 +
drivers/scsi/scsi_sysfs.c | 36 +-
drivers/scsi/scsi_transport_iscsi.c | 414 +-
drivers/scsi/sd.c | 28 +-
drivers/scsi/sr.c | 37 +-
drivers/scsi/st.c | 5 +-
include/scsi/iscsi_if.h | 230 +-
include/scsi/libiscsi.h | 1 +
include/scsi/scsi_cmnd.h | 1 +
include/scsi/scsi_driver.h | 2 +-
include/scsi/scsi_host.h | 10 +
include/scsi/scsi_transport_iscsi.h | 4 +
83 files changed, 5068 insertions(+), 18150 deletions(-)
delete mode 100644 Documentation/scsi/aic7xxx_old.txt
delete mode 100644 drivers/scsi/aic7xxx_old.c
delete mode 100644 drivers/scsi/aic7xxx_old/aic7xxx.h
delete mode 100644 drivers/scsi/aic7xxx_old/aic7xxx.reg
delete mode 100644 drivers/scsi/aic7xxx_old/aic7xxx.seq
delete mode 100644 drivers/scsi/aic7xxx_old/aic7xxx_proc.c
delete mode 100644 drivers/scsi/aic7xxx_old/aic7xxx_reg.h
delete mode 100644 drivers/scsi/aic7xxx_old/aic7xxx_seq.c
delete mode 100644 drivers/scsi/aic7xxx_old/scsi_message.h
delete mode 100644 drivers/scsi/aic7xxx_old/sequencer.h

James

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Arun Sharma: "Re: [PATCHSET 00/24] perf tools: Add support to accumulate hist periods(v6)"
Previous message: David Cohen: "Re: [PATCH] x86: don't add new __cpuinit users to Merrifieldplatform code"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]