[PATCH] gpio: bcm281xx: Fix parameter name for GPIO_CONTROL macro

From: Markus Mayer
Date: Tue Jan 21 2014 - 19:11:49 EST


The GPIO_CONTROL macro returns the control register offset when given a
GPIO number.

Update the argument name in the macro to reflect that it takes in a
GPIO number and not a bank.

Signed-off-by: Markus Mayer <markus.mayer@xxxxxxxxxx>
Reviewed-by: Tim Kryger <tim.kryger@xxxxxxxxxx>
---
drivers/gpio/gpio-bcm-kona.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c
index 233d088..93a5b01 100644
--- a/drivers/gpio/gpio-bcm-kona.c
+++ b/drivers/gpio/gpio-bcm-kona.c
@@ -28,6 +28,10 @@
#define GPIO_BANK(gpio) ((gpio) >> 5)
#define GPIO_BIT(gpio) ((gpio) & (GPIO_PER_BANK - 1))

+/* There is a GPIO control register for each GPIO */
+#define GPIO_CONTROL(gpio) (0x00000100 + ((gpio) << 2))
+
+/* The remaining registers are per GPIO bank */
#define GPIO_OUT_STATUS(bank) (0x00000000 + ((bank) << 2))
#define GPIO_IN_STATUS(bank) (0x00000020 + ((bank) << 2))
#define GPIO_OUT_SET(bank) (0x00000040 + ((bank) << 2))
@@ -35,7 +39,6 @@
#define GPIO_INT_STATUS(bank) (0x00000080 + ((bank) << 2))
#define GPIO_INT_MASK(bank) (0x000000a0 + ((bank) << 2))
#define GPIO_INT_MSKCLR(bank) (0x000000c0 + ((bank) << 2))
-#define GPIO_CONTROL(bank) (0x00000100 + ((bank) << 2))
#define GPIO_PWD_STATUS(bank) (0x00000500 + ((bank) << 2))

#define GPIO_GPPWR_OFFSET 0x00000520
--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/