Re: [PATCH] imx27: pinctrl: fix wrong offset to ICONFB

From: Markus Pargmann
Date: Tue Jan 21 2014 - 05:25:03 EST


Hi,

On Thu, Jan 16, 2014 at 09:18:23AM +0800, Chris Ruehl wrote:
> The offset to ICONFB was incorrect, this patch set the correct value 0x14.
> dev_dbg in function imx1_write_2bit print the wrong address and had been
> moved after address calculation.
>
> Signed-off-by: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>

Reviewed-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx>

Perhaps this should go to the stable tree too for 3.13 and 3.14?

Regards,

Markus

> ---
> drivers/pinctrl/pinctrl-imx1-core.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/pinctrl/pinctrl-imx1-core.c b/drivers/pinctrl/pinctrl-imx1-core.c
> index f77914a..8dfc3dc 100644
> --- a/drivers/pinctrl/pinctrl-imx1-core.c
> +++ b/drivers/pinctrl/pinctrl-imx1-core.c
> @@ -45,7 +45,7 @@ struct imx1_pinctrl {
> #define MX1_DDIR 0x00
> #define MX1_OCR 0x04
> #define MX1_ICONFA 0x0c
> -#define MX1_ICONFB 0x10
> +#define MX1_ICONFB 0x14
> #define MX1_GIUS 0x20
> #define MX1_GPR 0x38
> #define MX1_PUEN 0x40
> @@ -97,13 +97,13 @@ static void imx1_write_2bit(struct imx1_pinctrl *ipctl, unsigned int pin_id,
> u32 old_val;
> u32 new_val;
>
> - dev_dbg(ipctl->dev, "write: register 0x%p offset %d value 0x%x\n",
> - reg, offset, value);
> -
> /* Use the next register if the pin's port pin number is >=16 */
> if (pin_id % 32 >= 16)
> reg += 0x04;
>
> + dev_dbg(ipctl->dev, "write: register 0x%p offset %d value 0x%x\n",
> + reg, offset, value);
> +
> /* Get current state of pins */
> old_val = readl(reg);
> old_val &= mask;
> --
> 1.7.10.4
>
>

--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/