[PATCH v6 00/10] USB Host support for OMAP5 uEVM (for 3.14)

From: Roger Quadros
Date: Mon Jan 20 2014 - 09:12:26 EST


Hi Benoit & Tony,

This patchset brings up USB Host ports and Ethernet port on
the OMAP5 uEVM board.

It depends on the TI Clock DT conversion patches [1] and is based
on 3.13

[1] - http://article.gmane.org/gmane.linux.ports.arm.kernel/293147

Tested on:
- OMAP5 uEVM
- Pandaboard ES Rev. B1
- Beagleboard-XM Rev C2
- Beagleboard Rev C4.

cheers,
-roger

Changelog:

v6:
- Initialized clocks to -ENODEV and split patch 3.

v5:
- Expose all clocks in the DT binding document for mfd:omap-usb-host
and mfd:omap-usb-tll

v4:
- Updated DT binding document for clock binding

v3:
- Rebased on top of 3.13-rc7

cheers,
-roger

Roger Quadros (10):
mfd: omap-usb-host: Use resource managed clk_get()
mfd: omap-usb-host: Get clocks based on hardware revision
mfd: omap-usb-host: Use clock names as per function for reference
clocks
mfd: omap-usb-host: Update DT clock binding information
mfd: omap-usb-tll: Update DT clock binding information
ARM: dts: omap4: Update omap-usb-host node
ARM: dts: omap5: Update omap-usb-host node
ARM: dts: omap4-panda: Provide USB PHY clock
ARM: dts: omap5-uevm: Provide USB PHY clock
ARM: OMAP2+: Remove legacy_init_ehci_clk()

.../devicetree/bindings/mfd/omap-usb-host.txt | 23 +++
.../devicetree/bindings/mfd/omap-usb-tll.txt | 10 ++
arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
arch/arm/boot/dts/omap4.dtsi | 6 +
arch/arm/boot/dts/omap5-uevm.dts | 8 +-
arch/arm/boot/dts/omap5.dtsi | 6 +
arch/arm/mach-omap2/pdata-quirks.c | 16 --
drivers/mfd/omap-usb-host.c | 171 ++++++++++-----------
8 files changed, 128 insertions(+), 120 deletions(-)

--
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/