Re: [PATCH v2] usb: phy: msm: fix compilation errors when!CONFIG_PM_SLEEP

From: Josh Cartwright
Date: Fri Jan 17 2014 - 13:29:50 EST


On Fri, Jan 17, 2014 at 11:58:51AM -0600, Josh Cartwright wrote:
> Both the PM_RUNTIME and PM_SLEEP callbacks call into the common
> msm_otg_{suspend,resume} routines, however these routines are only being
> built when CONFIG_PM_SLEEP. In addition, msm_otg_{suspend,resume} also
> depends on msm_hsusb_config_vddcx(), which is only built when
> CONFIG_PM_SLEEP.
>
> Fix the CONFIG_PM_RUNTIME, !CONFIG_PM_SLEEP case by changing the
> preprocessor conditional, and moving msm_hsusb_config_vddcx().
>
> While we're here, eliminate the CONFIG_PM conditional for setting
> up the dev_pm_ops.
>
> This address the following errors Russell King has hit doing randconfig
> builds:
>
> drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_runtime_suspend':
> drivers/usb/phy/phy-msm-usb.c:1691:2: error: implicit declaration of function 'msm_otg_suspend'
> drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_runtime_resume':
> drivers/usb/phy/phy-msm-usb.c:1699:2: error: implicit declaration of function 'msm_otg_resume'
>
> Cc: Ivan T. Ivanov <iivanov@xxxxxxxxxx>
> Reported-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
> Signed-off-by: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
> ---
> v1->v2: Change conditional to simply CONFIG_PM (thanks ccov and khilman!)
>
> drivers/usb/phy/phy-msm-usb.c | 57 ++++++++++++++++++++-----------------------
> 1 file changed, 26 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
> index 8546c8d..5b169a7 100644
> --- a/drivers/usb/phy/phy-msm-usb.c
> +++ b/drivers/usb/phy/phy-msm-usb.c
[..]
> @@ -440,7 +414,32 @@ static int msm_otg_reset(struct usb_phy *phy)
> #define PHY_SUSPEND_TIMEOUT_USEC (500 * 1000)
> #define PHY_RESUME_TIMEOUT_USEC (100 * 1000)
>
> -#ifdef CONFIG_PM_SLEEP
> +#if CONFIG_PM

*sigh*. This, of course, should have been #ifdef CONFIG_PM. Fixed
v3 below.

Thanks,

Josh

-- 8< --
Subject: [PATCH v3] usb: phy: msm: fix compilation errors when !CONFIG_PM_SLEEP

Both the PM_RUNTIME and PM_SLEEP callbacks call into the common
msm_otg_{suspend,resume} routines, however these routines are only being
built when CONFIG_PM_SLEEP. In addition, msm_otg_{suspend,resume} also
depends on msm_hsusb_config_vddcx(), which is only built when
CONFIG_PM_SLEEP.

Fix the CONFIG_PM_RUNTIME, !CONFIG_PM_SLEEP case by changing the
preprocessor conditional, and moving msm_hsusb_config_vddcx().

While we're here, eliminate the CONFIG_PM conditional for setting
up the dev_pm_ops.

This address the following errors Russell King has hit doing randconfig
builds:

drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_runtime_suspend':
drivers/usb/phy/phy-msm-usb.c:1691:2: error: implicit declaration of function 'msm_otg_suspend'
drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_runtime_resume':
drivers/usb/phy/phy-msm-usb.c:1699:2: error: implicit declaration of function 'msm_otg_resume'

Cc: Ivan T. Ivanov <iivanov@xxxxxxxxxx>
Reported-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
Signed-off-by: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
---
drivers/usb/phy/phy-msm-usb.c | 57 ++++++++++++++++++++-----------------------
1 file changed, 26 insertions(+), 31 deletions(-)

diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 8546c8d..d204f74 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -159,32 +159,6 @@ put_3p3:
return rc;
}

-#ifdef CONFIG_PM_SLEEP
-#define USB_PHY_SUSP_DIG_VOL 500000
-static int msm_hsusb_config_vddcx(int high)
-{
- int max_vol = USB_PHY_VDD_DIG_VOL_MAX;
- int min_vol;
- int ret;
-
- if (high)
- min_vol = USB_PHY_VDD_DIG_VOL_MIN;
- else
- min_vol = USB_PHY_SUSP_DIG_VOL;
-
- ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol);
- if (ret) {
- pr_err("%s: unable to set the voltage for regulator "
- "HSUSB_VDDCX\n", __func__);
- return ret;
- }
-
- pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol);
-
- return ret;
-}
-#endif
-
static int msm_hsusb_ldo_set_mode(int on)
{
int ret = 0;
@@ -440,7 +414,32 @@ static int msm_otg_reset(struct usb_phy *phy)
#define PHY_SUSPEND_TIMEOUT_USEC (500 * 1000)
#define PHY_RESUME_TIMEOUT_USEC (100 * 1000)

-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
+
+#define USB_PHY_SUSP_DIG_VOL 500000
+static int msm_hsusb_config_vddcx(int high)
+{
+ int max_vol = USB_PHY_VDD_DIG_VOL_MAX;
+ int min_vol;
+ int ret;
+
+ if (high)
+ min_vol = USB_PHY_VDD_DIG_VOL_MIN;
+ else
+ min_vol = USB_PHY_SUSP_DIG_VOL;
+
+ ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol);
+ if (ret) {
+ pr_err("%s: unable to set the voltage for regulator "
+ "HSUSB_VDDCX\n", __func__);
+ return ret;
+ }
+
+ pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol);
+
+ return ret;
+}
+
static int msm_otg_suspend(struct msm_otg *motg)
{
struct usb_phy *phy = &motg->phy;
@@ -1733,22 +1732,18 @@ static int msm_otg_pm_resume(struct device *dev)
}
#endif

-#ifdef CONFIG_PM
static const struct dev_pm_ops msm_otg_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(msm_otg_pm_suspend, msm_otg_pm_resume)
SET_RUNTIME_PM_OPS(msm_otg_runtime_suspend, msm_otg_runtime_resume,
msm_otg_runtime_idle)
};
-#endif

static struct platform_driver msm_otg_driver = {
.remove = msm_otg_remove,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
-#ifdef CONFIG_PM
.pm = &msm_otg_dev_pm_ops,
-#endif
},
};

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/