debugging head.S

[Darryl]

I am trying to build 3.12.6 for an OMAP3-based board (debug console on 
UART 3)

Enabling DEBUG in

    arch/arm/boot/compressed/head.S

and with

    CONFIG_DEBUG_LL_INCLUDE="debug/omap2plus.S"

compiling (well, actually, assembling) gives the following (slightly 
reformatted):

    arch/arm/boot/compressed/head.S: Assembler messages:
    arch/arm/boot/compressed/head.S:1237: Error: ARM register expected 
-- `sub ,r3,r1'
    arch/arm/boot/compressed/head.S:1237: Error: ARM register expected 
-- `ldr r3,[,#0]'
    arch/arm/boot/compressed/head.S:1237: Error: ARM register expected 
-- `ldr r1,[,#4]'
    arch/arm/include/debug/omap2plus.S:138: Error: ARM register 
expected -- `str r3,[,#0]'
    arch/arm/include/debug/omap2plus.S:138: Error: ARM register 
expected -- `str r3,[,#4]'
    arch/arm/include/debug/omap2plus.S:138: Error: ARM register 
expected -- `str r3,[,#8]'
    arch/arm/include/debug/omap2plus.S:138: Error: ARM register 
expected -- `str r3,[,#0]'
    arch/arm/include/debug/omap2plus.S:138: Error: ARM register 
expected -- `str r3,[,#4]'
    arch/arm/include/debug/omap2plus.S:138: Error: ARM register 
expected -- `str r3,[,#8]'
    arch/arm/include/debug/omap2plus.S:138: Error: ARM register 
expected -- `ldr ,[,#8]'
    arch/arm/include/debug/omap2plus.S:138: Error: shift expression 
expected -- `add r3,r3,'
    arch/arm/include/debug/omap2plus.S:138: Error: shift expression 
expected -- `add r1,r1,'
    arch/arm/boot/compressed/head.S:1255: Error: ARM register expected 
-- `sub ,r3,r1'
    arch/arm/boot/compressed/head.S:1255: Error: ARM register expected 
-- `ldr r3,[,#0]'
    arch/arm/boot/compressed/head.S:1255: Error: ARM register expected 
-- `ldr r1,[,#4]'
    arch/arm/include/debug/omap2plus.S:138: Error: ARM register 
expected -- `str r3,[,#0]'
    arch/arm/include/debug/omap2plus.S:138: Error: ARM register 
expected -- `str r3,[,#4]'
    arch/arm/include/debug/omap2plus.S:138: Error: ARM register 
expected -- `str r3,[,#8]'
    arch/arm/include/debug/omap2plus.S:138: Error: ARM register 
expected -- `str r3,[,#0]'
    arch/arm/include/debug/omap2plus.S:138: Error: ARM register 
expected -- `str r3,[,#4]'
    arch/arm/include/debug/omap2plus.S:138: Error: ARM register 
expected -- `str r3,[,#8]'
    arch/arm/include/debug/omap2plus.S:138: Error: ARM register 
expected -- `ldr ,[,#8]'
    arch/arm/include/debug/omap2plus.S:138: Error: shift expression 
expected -- `add r3,r3,'
    arch/arm/include/debug/omap2plus.S:138: Error: shift expression 
expected -- `add r1,r1,'

It looks like the 'addruart' macro in in omap2plus.S is shorted a 
parameter from the macro 'loadsp' macro in head.S, called in 'puts' and 
'putc'.

Am I misusing this in some way?  Any suggestions?

Darryl
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/